I will say that I have been dealing with Phyllis for many many years. Maybe 15 or so and she…read morenormally gives me a good product. But, she has messed up and fixed most of them. This time however she went way out there and changed something that to me were huge. First I have always got the same shirts a light gray with front pocket and my logo on the back. This time I ordered we both had to go from memory and she looked it up I thought. First the quality of the shirt was less then normal. They are much thinner but I have noticed that most t-shirt these days. Then there was no pocket on the front and my loge was shrunk by almost half. I wasn't a happy camper and she hasn't returned my calls. So I guess next time I'll go somewhere else.

Very happy with our new shirts.. I've been ordering shirts through customink.com and they wouldn't…read moreorder the exact shirts I wanted.. Phyllis took the time to help us and make sure we got what we wanted. Just got our shirts in and they look great! Can't wait to order more!

Mary Fisher and her amazing design team recreated our website to perfection. Like many businesses,…read moreour website is our introduction to the community. Mary and her team exceeded my expectations with our new website. It represents us well, functional, informative, and user friendly. I didn't realize all of the nuances that go into creating a website. Mary thinks of everything! I so appreciate her attention to detail and her contribution to the success of Natural Look Medical Spa.

I was more than satisfied with the service that was rendered. After being disappointed by several…read moremarketing companies, I was referred to Mary Fisher Designs. I'm very particular with work being done for me, but they made my experience extremely stress free. They went over and beyond what I had hoped for. If your looking for professional and detailed work I would highly recommend them.

Disclaimer: I have had many kinds of merchandising done over the years, everything from shirts to…read morestickers to patches to weatherproof banners. I am not a customer naive to merchandising, printing processes, digital conversion processes, or anything in that wo Unfortunately I need to go against the grain here and say that my experience with JaxColor has been a negative one and that I am not likely to work with them (read: shop local) again. I needed to get a short run of some shirts made and I contacted JaxColor on 8/19 with some questions. Previously I'd worked with Terminus Tees (out of Georgia) for my shirt needs but decided to put my money to a local business this time. Let me preface for a moment to add: my HARD EARNED money. I received my proof and SEPS for approval, things seemed fine. The stipulation that comes with the proof is, "any errors existing on the approved proof will be printed and that any additional costs incurred to fix these errors are your responsibility and not eligible to be re-run free of charge." This is a reasonable business practice, and I reviewed and approved the order. When I came to pick the shirts up, there was a problem right away. First, I was informed a printing mistake was made on one shirt. That shirt was replaced for me in the order, but by a different shirt which I didn't approve. I am fairly easygoing and accepted it, then took it home. When I opened the box to review them all, I saw that there was a square-shaped array of noticeable - not subtle - white dots in the exact shape of my image, permeating every black/dark area of my image, which was not in my original PSD submission. I tried to get over it but I found that I couldn't even successfully sell these shirts because this looks like an amateur mistake. I called JaxColor a day or two later and explained the situation, politely, to an employee named Brent, who told me there were some non-regular personnel who had worked on my order and it sounded like the fault was on the business. He arranged for me to see Matt and the manager/owner later that day. I came in on time and I only see Matt waiting for me. I handed him a shirt, explained the same thing, and he went out of view to presumably show the relevant employee(s) my issue. He promptly returned and explained that the particular style shirt I ordered (American Apparel 2102 black shirts) was woven in a certain way where these bizarre white dots came out prominently in between the stitching. He said that the dots were there in the proof. I've attached a screenshot of that to this review. When I turned the brightness ALL THE WAY UP, AND zoomed 200%, I could see some extremely faint brown little dots blended into the black. These, again, weren't in my PSD, but more importantly, how would 99% of people notice them, and if they do, would it be expected that those imperfections print out so boldly on the entire order of shirts? And is it reasonable that the customer would not even get a phone call advising that this result is happening with this shirt? Nobody noticed this and thought it wasn't up to standard? After essentially telling me I was screwed, Matt disappeared and didn't come back. Let me reiterate: I've worked with shirt orders before, - up to 1000 prior - I know how CMYK printing works and I understand that differences between a digital image and a printed textile will exist. Let me reiterate: Nobody noticed that every one of my shirts had this excessive matrix prominently printed on there, nobody could be bothered to inform me that a problem was happening with these shirts so I could, if I had to, choose a different shirt (even though I didn't add the dots in the first place)? And let me finally point out, this was not a huge order of shirts, this was 36 shirts. We aren't breaking the printing machines with this order. But nobody at any point noticed this order was not up to par? Is it reasonable that anybody at all would notice an imperfection, something added to an image on JaxColor's watch, which can only be faintly seen in extreme magnified light, and then after seeing it - if they see it - know that it will print out and look like white ink drops spilled all over the dark areas of the image on the shirt, which also apparently has flaws in its stitching, which I got to find out about the hard way (yet they still knowingly sell this shirt)? The second photo I've attached here shows a close up on my original PSD (top half) compared with a circled area of the finished shirt where a perfectly evened matrix of dots can be seen (bottom half). As I mentioned, this outlines and permeates the entire shirt. It looks like snow fell onto every shirt in a perfect square and stayed there, and this didn't arouse any concern with anyone at JaxColor during the printing process. As of today, it has been a month since I requested an audience with the owner/manager of JaxColor to discuss my issue with my order. I never received any email or call back.

I am the proud business owner of Zen Sweets by Mandy, LLC. I had the honor of having Jax Print…read moredesign printing for my business vehicle. The staff were friendly and they were understanding of my needs. The design application was done with extreme care. I am 100% satisfied with the work done at Jax Print. I will use them for future printing needs.

Great experience. Steve works fast and he's reliable. I'm really happy with the timeliness,…read moreefficiency, and prices. Couldn't be happier. They're now getting all of our business.

They did such a beautiful job on our company. New logo, embroidered t-shirts. All the girls love…read morethem and we got a lot of compliments, they did a rush job for us and got them done even early. We are very pleased and will definitely continue working with this company. They have done work for my husband in the past and he is also very happy with them.

Great service. Their screen prints came out better than I thought. I was initially reluctant to go…read morewith them but happy I did!

CAUTION ..,,,. !!! EXTREMELY LATE on delivery. Ordered my two (2) plane models 6 months ago…read more Promised/advertised delivery is 12 weeks. It's been double (24 weeks) that amount of time, and still no promises of when it will be complete. They promise progress photos .... None delivered. I have requested a refund and will find someone else. I will see if they will refund my money ..,, they promise 100% satisfaction...... let's see.

BLUF: Find a different patch company to go through, such as Badass Patches. Quality, pricing, and…read morepunctuality is typically far better than Aviator Gear. Our unit was looking for a new, updated patch design so we chose Aviator Gear, as it was one of the first options to pop up on Google. It ended in us never putting the product in full production and receiving a full refund. The process is fairly straight-forward. You send them an idea/drawing, the dimensions, and the material (PVC or Embroidered) so that their artists can create a production-ready product from their line. I sent them a professionally drawn render of our idea so they knew exactly what we wanted. They also ask you to suggest a date you need the product by. SUGGEST is the key word here; don't expect to receive your product for at least 2-3 months after it is approved. Here is why: - As mentioned in some other reviews, they seem to take your idea and run it through some sort of AI image generator, taking the creativity and quality out of the picture. Oftentimes the image they send you and the actual product look NOTHING alike. - Communications are very sparse and untimely. Their liaisons communicate over email and oftentimes don't respond for 4-5 business days and typically respond between the hours of 0000-0400 (CST). By the time you respond to them, you're waiting at least a week to move on to the next step. - For their product quality, they claim to have extensive experience with creating military patches that match the regulations employed by the DoD. We went through 7 different production artworks, mostly because they were not adhering to regulations or seemingly were disregarding the instructions I was giving them. Combined with the delayed email response times and you're looking at a pretty frustrating creation process. - Compared to their competitors (like Badass Patches), their pricing is up to $2.00-3.00 higher per unit for a lower quality product. At the end of the day, we DID receive a full refund, so that is why I am giving them a two-star review. However, the process is so untimely, I'd say you're better off using your time elsewhere and with a company that cares more about their products.

They are very helpful and accommodating and it go to place for awards and trophies for a karate dojoread more

Very happy to recommend this local business! What a gem, and I'm glad I found them. I wanted to get…read morea watch engraved, not an easy task to find a place to do that. Most places said No and one place quoted me a price that was three times higher than Myrtel's. Their engraving was perfect, and they got it done in a week, since I needed it for a gift. Thank you, Myrtel's! PS they give a small discount for cash. :)

Adam did a fantastic job re-glueing a vintage set of Danish modern dining room chairs…read more He is very up front about what he can do, the time frame, and cost. We are looking forward to having him help us with more involved work in the near future!