Did a great job breathing new life into an old tool box. Low price and good work. Powder coating…read morethe inside of a this tool box isn't an easy task. It opens up like a clam shell, there are lots of difficult corners and areas to reach. Turned out great, durable finish. It's almost too nice to even be used as a toolbox anymore . I'll be going back for future work.

So sad - my bed frame is ruined. I dropped my metal bed frame off the end of October. I was told…read moreit would take 2 weeks to paint the head board, foot board, and the side rails. There was a center brass piece on the foot board that I wanted to keep - it's what made it special. Apparently, they didn't write that part down, though, so when I went to pick it up in December 2nd (yes, December), I found that they had painted over the brass and my side rails were missing. They said they could remove the paint from the brass in a few days. A few days later - I went by and picked up my side rails but the paint wasn't off the baseboard. I was sent a picture on the 14th - paint removed - but a few touch-ups to do. By the 18th of December, it was still not ready for pickup - and I had to go out of town :(. To note - the white paint on the headboard, side rails, and most of the base board is nice and shiny and looks great. I was told the powder coat will never come off, which is why my friend told me to get it on my bedframe. If it had a nice brass piece in the center - I'd be writing a happy review only complaining about how long it took and poor communication. I was finally able to pick it up today, the 26th of Dec, 2 full months after dropping it off - and yes they removed the white paint but somehow I have a brass painted highlight instead of a bass highlight on my foot board. Somehow, between the picture they sent me on Dec 14th and today - someone decided to paint what had taken 2 weeks to un-paint. There's nothing I can do about it now.. it's so awful. The best part of the frame was this nice pop of brass and now it's a muddled, fake sparkly, brass colored paint.. with a white paint smudge on it. If I want to keep sleeping on the floor - I can try to take it somewhere else, assuming that someone can do something with this but who knows? Like the review in 2015 - I thought it was great due to the convenient location and being a small business but 2 weeks turning into 8 weeks and the one part I wanted the most being destroyed... On top of that, not telling me what they did. Just to give it to me and tell me how to shine it up, like I wouldn't notice it's spray paint and not brass! I guess they figured I was stupid enough to pay them before I saw it when I went to pickup the first time, and didn't yell during the repeated calls, I must be too stupid to tell brass paint from real brass. Now I have to try to salvage it myself - deciding if I want to paint over the nonsense they tried to pass off to me with some other color or just paint it all white... So so so upset and sad. Something I thought was great is now mediocre and cost me $160. Don't go there if you need your items in any kind of timely manner and don't make it the least bit out of the ordinary or you'll get what I got. Being nice to them doesn't help, either. They didn't work faster or pay more attn, even though they did thank me for not yelling about the fiasco.

Thanks to Glenn's Wheel and Polishing for the amazing job they did on my rims. I bought a 2025…read moreRanger off the lot, the 26 models were out and was able to get a decent price for a 25 model. I wanted white but ended up with carbon gray with carbon gray rims. After 6 months enjoying my truck I realized I really didn't like the dark gray on gray look, I wanted something with a shine to it. After researching rim repair I found Glenn's. I'm extremely picky and Glenn's did not disappoint. They machined my rims and matched a darker shade of gray found on my bumpers. I Love the way it turned out. Thanks to Christian and everyone at Glenn's for a great job.

Glenn's Wheel Polishing did an amazing job on my Porsche wheels they look brand new! I highly…read morerecommend them for any wheel work the work they do is fantastic and fast.

Top notch job on a set of tesla wheels I wanted to get powder coated. One time and on budget.read more

I had a weight bench powder coated by CCC and they did a phenomenal job! Friendly staff and got the…read morejob done very quickly. I will be returning for any future powder coating needs I may have!

Left my 2022 Supra to get my wheels done and work came out better than I could imagine. Turnaround…read moretime was incredibly quick and would recommend them to anybody

The ower of this place bad business takes his time dont finish the jobs on time and then wants to…read morecharge u pensive Name marcus fernandez

Great Job! Walt's and team expertly upholstered sofa…read morerequired skilled craftsmanship with lots of tufting and trims. The foam in the sofa was old and totally 'crunchy', so it needed to be replaced.

Walt's and team expertly upholstered for us a vintage sofa and a set of dining room chairs. The…read morefabric we chose for the dining chair seats had a complicated pattern and Walt's did a fine job of fitting the design on the seats. The sofa required skilled craftsmanship with lots of tufting and trims. The foam in the sofa was old and totally 'crunchy', so it needed to be replaced. We chose medium firm foam for the job, and it feels just right. We were so pleased with the quality of the workmanship, and the finished result. Both projects were finished on time and were reasonably priced. It was fun to work with Ashlea at Walt's on the project, and we'll use Walt's again when we next find vintage furniture to recover.

We worked with Miles and Aaron at Three Sons to reupholster a 1940/50 platform rocker. They did a…read moregreat job. They communicated really well. Listened to what we wanted and delivered on every point. I would work with them again.

I have done business before about a year ago and was happy with the results. The owner was very…read morefriendly and knowledgeable. Fair pricing and a large selection of fabrics. I decided to go with red leather. I'll be back again when I need to. Thank you!

I had 6 dining room chairs reupholstered at Elite. The price was 30% less that several other shops…read more;in the Tampa area. The work was perfect. Lead times are very long at all these shops at the moment, but Elite was able to better the others I checked.

0 stars would be more appropriate. Apparently, "Ron" doesn't care if he gets new work or not. I…read morecontacted this shop, among others, regarding an upholstery job for a wing back arm chair. Mind you, the chair wasn't damaged at all, & was of a good brand. Best part; it fits me perfectly, I just wasn't crazy about the fabric. I emailed the requested photos and waited for the estimate. I received the estimate in a timely manner and was told what the labor charge would be. Fine. But the the email also stated it would "need 10-12 YARDS of fabric and I might be better off, if I bought a different chair." WTH??? Who are you, to be SO CONDESCENDING to a potential customer?? If you don't want to take a job, you can simply decline politely! Needless to say, my chair is almost done & it required 5 YARDS of fabric. A word of advice for you Elitist Ron: watchout. Karma is a SOB.

Really good solid people to work with all the way through the process they are quiet and efficient…read morethey get things done though communicate any concerns with you after working with them for more than a year I'm nothing but happy. For me they were great they are great manufacturing partners we have run tens of thousands of complex parts through them with complete success. We value what the bring to products. Richard Hughes Product Designer

Wasted 2 months trying to work with these people. Rude, uncommunicative and unprofessional. After…read morenumerous calls and emails they finally reply only after I had stated that I would look for the work to be done elsewhere. They gave me a quote for the work which we approved. After asking for few weeks on status of our project they finally replied and said they would not do the work for us because what we were asking for does not match the quote. It was at this point I decided I had enough and it wasn't worth our time begging to pay them for services.