if i could give zero stars i would. I've had a bike frame powder coated here before and it came out…read moregood. however i returned to have a rear differential housing powder coated, it came out terrible. tape lines were horrible, they coated a oil seal surface of the input flange, effectively making my whole differential a piece of scrap metal. this differential isn't made anymore and cant get individual parts for it. Luke told me they cant do anything and to get out of the store after they destroyed my parts. DO NOT come here to get any work done. the quality is not there. i gave them a chance to clean and polish the damaged part, all they did was hit it with some scotch pads and emery cloth which after the fact i could still see the sand blasting pits in the seal surface and was told that's the best they could do. this company owes me a rear differential input flange but refuses. this is the kind of customer service you get from them when they FUK up. this problem is above Lukes pay grade. the only way this can be remedied is by continuing to polish my part to a near machined finish or replacing the differential.

In September 2014, I bought a brand new motorcycle and had a dealer-installed, black ceramicoated…read morestage 1 exhaust installed. When I picked it up, I went over the bike with a fine-toothed comb. I rode it until November when i had my first 500 mile service. It was cold and wet out, so I wore rain gear. When I got the bike home and started to clean it up, I noticed a spot of melted raingear on the exhaust- about a 2" patch. I tried everything suggested online to remove it. Two different Western MA independent bike shops recommended Morini, so I went. I met with the owner Justin and showed him the bike. He quoted $125 to ceramicoat the muffler where the spot was and it should match the rest of the exhaust as their color is about the same- but if not, they could to the entire exhaust so it all matches for $375. He stated this was an "EASY" task for them as they've done it numerous times. We agreed and moved forward. After he had finished the muffler, I went to see it- it was perfect, but he stated that when they went to put it on, the color didn't match so I agreed to the higher amount to have it all done in the matching black color. I left the bike with them again and after a few days, went in to see it. Justin met me with an exhaust part in his hand because he had to redo it as he had hit a "hidden bolt" and chipped the coating they had applied. He expressed to me how there was very little room and that this exhaust was much harder than he thought. A couple days later, I went back and now there were chips on the muffler where it attached to the forward pipes, scuffs on the timing cover, scrapes on the cam cover, the inside of the right brake pedal assembly and MASSIVE scuffs on the oil cooler. I freaked out- his little helper stated he's hit it with some touch up paint if I wanted. I almost decked him. My bike with 580 miles on it had a ton of cosmetic damage- all around the areas of the exhaust. I ended up calling my insurance company and they replaced $3200 in parts/labor. To do the job properly, the dealer actually undoes the oil cooler and the brake assembly so they hang freely away from the frame allowing for the room needed to install the exhaust. If he'd spent 1/2 an hour or less to do this, there never would've been an issue. instead, his helper told me it took 3 people wrestling with it to get it in and out of the bike- no wonder it was damaged. I went back to Justin and he got cocky stating I couldn't prove the damage wasn't there before he touched it- maybe the dealer caused the damage installing the stage 1 exhaust. Well, the damage was BLATANT and obvious- and how would there be chips on the exhaust you JUST DID for me??? AND, if you're a few inches away from something and see all this damage BEFORE you touched it, you wouldn't say anything to cover your own butt? I know I would. Then his dad came out and started in on me about how wonderful his kid is and how good of a job he does. They refused to refund me or anything. This was a year ago and ANYONE who asked me about powdercoating or ceramicoating has heard this story- including the shops that referred me. Horrible work, terrible service, and a nightmare to deal with. There's more- phone calls, voicemails I saved and such, but I've typed enough. Oh, and I have pics if anyone doubts what I've written.

From the owner: Located in Springfield, MA, Morini Performance Coatings is a unique business specializing in powder…read morecoating, wheel repair, high temperature ceramic coating, metal polishing, and custom painting. While the majority of powder coat businesses offer large scale, high quantity industrial refinishing, Morini Performance Coatings specializes in a customized detail oriented finished product. We can take the time and expertise you expect to give detail and personal attention to our work. With our talents and abilities we are able to combine these special processes to produce whatever outcome you as the customer desire.

They fixed one bent rim for me. Absolutely amazing customer service, really fast turn around time…read more I can't recommend them enough, 5+ stars in my opinion!

I've had the wheels for my 32 Chevy and some Tractor parts for my Kubota done by Andy at AMS. The…read moreresult was perfect. He's fair and works with you on figuring out what you want. I also have seen some larger lots he was doing for manufacturing outfits, they looked shiny and consistent. Give AMS a try, you will not regret it.

From the owner: Sandblasting Part Preparation…read moreMasking and plugging (threads, bearing surfaces, etc.) Hundreds of color choices including clear, matte, wrinkle and textures

Outstanding Metal Fabricators. The owner's kindness to details. Walter can and will construct,…read morewith state-of-the-art machines quality parts in a timely manner. I recommend The Metal Men!

The customer service by the owner is beyond abysmal. He can be rude and aggressive and never met…read moreone deadline he proposed to construct a steel staircase for me. I cannot comment on what his work is like for other items, but if you are an architect or contractor, I would not recommend MetalMen.

These guys are maestros of powder coating. We were in a pinch with a piece of food production…read moreequipment on a tight budget and urgent timeline, and despite so many other shops being utterly unsympathetic and unhelpful, these guys got the job done, easily, quickly, and perfectly affordably within 12 hours of our goal. We were back in production with far less downtime than we might otherwise have encountered. If you have any coating needs in this geography, talk to Tim and George here if you're ever able. I can't recommend them highly enough.

It actually upsets me to have to redo my review on K&S... I have been a customer for over 15 years…read moreand unfortunately I see the business going down hill since its ownership transfer. They still do great finish work, but prices and turn around time are getting out of hand. I really hope they start to turn things around to the way they used to be. The last two times I used them this year was not a positive experience.

Exactly as advertised. Brought my BMW wheels in for an overhaul and they came back good as new…read more Very satisfied with service and price. Thanks!

Wouldn't go anywhere else for wheel repair. It's clear that they take pride in their work and do as…read moreperfect a job as possible. You get what you pay for.