Joe and his crew did a complete refit of my beatup Tritoon. after the work was completed, my…read moreTritoon looks beautiful and I get plenty of compliments on it. Joe's customer service has been excellent throughout the process. He has always communicated with me, and his team is top notch! I highly recommend Bulletproof Marine services, you will not be disappointed. Thank you Joe.

Joe is the man, customer service, quality, you named it, hat's off to all the team behind making…read morethis happened.

We called this business for some rigging work while our vessel was in port, but they do not return…read morephone calls.

These guys know their stuff. I got several other rigging companies to quote my job. SD boat works…read morerates are competitive but the service is the main reason I chose them. They take the time to explain what needed to be done and what options I had. Scott and Matt were very professional while de masting the boat and treated my boat with the same care I do. I highly recommend them for any aspect of rigging you need.

They quoted one price to get some work done on my boat engine called the next day to hire them…read more They changed the price plus over 40%.. very unreliable, unprofessional unethical..

Made appointment for our boat engine to have so repairs done and mechanic arrived on time and was…read morefully prepared for the work scheduled. He was fast, pleasant and helpful. We have used Admiralty Marine twice now and service was great.

I have a Kodiak Flex-Bow tent. Heavy duty duckbill canvas tent that had its awning grommets ripped…read moreout in a 70MPH windstorm. Canvas Services expertly repaired it and strengthened the grommet mounting areas. Quick turnaround and professional service! Highly recommended. Thanks so much!

I had two different covers made for my pizza catering business. Excellent craftsmanship and…read morecustomer service. I have a couple of friends with boat covers from Canvas Service, they look great and hold up well in the sunshine and saltwater. Great family company right near Shelter Island.

I am so grateful to have gotten my 42 foot Catalina worked on by Morton Marine. Ken was always a…read morephone call away, very patient, professional, honest, and easy to communicate with. His knowledge about boats and issues made it simple to figure out what needed to be done in order to fix the problems I was having. The boat was having vibration issues and I was unable to rev the rpms which made it impossible for the boat to reach a normal speeds. After hauling out and pulling the shaft we needed to get a new shaft made, new prop, and just a full overhaul. I put all my trust in him and his team and ended up with better results than I could even imagine. It's like a new boat, I'm so happy. I was terrified of the final price at first but it was very fare. That's rare. Thank you Ken, Stan, Cole, and Luke. See you soon. Captain Liz Owner of Sterling Sails

I had a very positive experience with Morton Marine Services. Initially, I was…read moreunclear about various businesses working together with Safe Harbor Marine, where I was hauling out my 33 foot sloop for bottom cleaning and painting. I advised them that I wanted two seacocks inspected and possibly replaced, as well as repacking of both the prop shaft and rudder post. Upon haulout, I was directed across the yard to Morton Marine for those engineering issues, as Safe Harbor was only handling the bottom exterior of the boat. Upon arrival, I met with Stan, who was aware of the work I had requested, and came with me to size up what was needed before the boat even left the water. He clearly understood my concerns and described a plan of action. He was certain the work would be completed within the 4 days Safe Harbor was allowing for the bottom job. Before I went home on day one, the boat was hauled and on jackstands. I was absent for day 2, but they must have hit the ground running as most of my work items were handled then. On the morning of day 3, I was back to the yard to check on progress, and found the Morton Marine employee Vadim just finishing the rudder post packing. Everything I'd asked for was done and the yard was planning for launching soon. He then told me that they had observed pin hole leaks of water from my engine exhaust hose that was next to the rudder post. I knew the hose was old, but was surprised that it was worn to the point of failure, allowing exhaust gasses into the interior of the boat, a very dangerous situation. Of course I directed that it be replaced, which was possible pierside after launching. This called for removal of a decorative panel covering a wooden box thru-way for the hose to rise vertically upward a few feet above the waterline to prevent vacuum siphoning of seawater into the engine. At this point Ken Morton (owner and ops boss) arrived and personally assisted in panel removal to ensure it was not damaged. Mine must've been the smallest job in the yard, but the attention I was getting was amazing. We then found very rusted and disintegrating stainless tubing at the top of the hose loop. Ken said he would try to find a replacement, but it might have to be fabricated (very expensive). I was resigned to the cash outlay since this was a serious safety hazard, but the next morning Ken called to advise that Stan had reminded him that a far less expensive fiberglass loop was available. Five hours later, everything was done, including Stan adjusting the prop packing gland for a proper drip rate with shaft turning ahead and astern pierside. The worksite (my galley, head, and aft cabin) was wiped down and vacuumed. Everything Vadim and Stan worked on was clean and meticulously done to the highest standards. I am very grateful to Vadim, and Stan, and Ken for their superb work and attention to a major safety issue I had missed. These are the guys I will return to for boat servicing in the future, and I wholeheartedly recommend them to anyone needing engineering work on their boat in the San Diego area.

Pacific Coast Canvas work is absolute perfection! They completed the sunscreens for our 42 Carver…read moreand they are absolutely flawless! They did the canvass on our other boat and after three years they still look brand new. If you want to be stressed out, lied to, and be disappointed in the quality of work go use the guys that are "cheaper". We live in a marina in San Diego and the horror stories we hear about the bargain canvas companies are many. Jeff came out, measured, keeping us notified of where he was at in the process, and then installed them. I don't recommend anyone else for canvas, screens, and boat glass.

First review, for anything, ever. I received several quotes from different canvas companies,…read moredecided to pick Pacific Coast Canvas. Jeff's response times and call backs were great, price was reasonable and turnaround time was better than most. There was some confusion, probably on my part, as to what I was looking for. When they started to install the canvas, I expressed my confusion. Jeff, the consummate pro he is did not in fact throw me into the bay behind the boat for all the extra work I caused him. That alone rates a 5 star, as I'm not sure how clean the water is in the bay. Although frustrated, he never complained, assured me I would get exactly what I wanted and after confirming several items to make sure it really would be what I wanted, he bundled up all his hard work and took it back to the shop. He was back today and installed the new screens around the back deck of my boat. The quality of materials is fantastic. The fit, seams, coverage... everything looked spot on and lined up perfectly. It was Exactly what I was hoping for. Jeff never complained, never gave me a hard time, insured I got what I was expecting, regardless of my confusion and everything looks great! Did I mention he didn't throw me in the water?

I Had a Tip wheel Bracket welded on my Mobility Scooter, the Weld was Beautiful and the price was…read morevery good that I paid cash. I Highly Recommend Dynamic Welding

I needed a custom made oil pickup tube for my engine build and they were able to customize my stock…read moreone to fit. Now the engine is running, no oil pressure issues. Welds were solid and sealed

I called Point Loma Hydraulics the other day & told Jay i have a skid steer that blew a hose &…read moreneeded it done pretty quick for my business. he was at my place with in an hour & had all the fittings & correct HP hydraulic hose to get the job done. he did such a good job i had him do my pneumatic/hydraulic hose for my car jacks. He did a great job! his pricing is better than anyone I've used before. I HIGHLY RECOMMEND Jay at Point Loma Hydraulics & will definitely be calling him in the future.

Just wanted to Thank Point Loma Hydraulics for getting our Hydraulics set up in a timely manor. Jay…read morewent above and beyond to get us back out on the water. We will always hit up Point Loma Hydraulics Hose when we have any questions on our Hydraulics.