Quick response and performed the service as expected. Need a bike frame welded which many other…read moreshops won't do.

When our cast aluminum patio table was damaged in a rogue wind event, Fusion Welding quickly…read moreresponded and proposed a sensible repair strategy. Both Dave and Adam are perfectionists and went above and beyond to make sure we were happy. The table is stronger than ever - highly recommended.

Excellent job, I had a BMW M-Performance Exhaust for my F82 that needed to weld supporting brackets…read moreto prevent the cracking on the exhaust. They charged a reasonable price $230. They did a stellar job on the welding and very nice people! I highly recommend because they are only one of the few shops in the area that weld titanium. I did not get a chance to take a photo since its on my car now.

Great people! Awesome service. I came to them in dire straits as my aluminum bar on my work truck…read morebroke. It was a Friday and I explained to them that I used that bar for work. They gave me a quote and estimated it would be done in a week. Begrudgingly I had to accept it; although deep inside I had wish it would be done sooner. To my surprised, it was done on Monday and cheaper than what I was quoted. Thank you Advanced Welding for your prompt service, EXCELLENT work, and great rate. I cannot say enough good things about this small family owned business. It's rare that I need something welded and finding a good welder was a task. If you need something welded, I highly recommend Advanced Welding.

I had Pawl create a custom fabricated steel umbrella adapter for me…read more I have a steel tube embedded in my concrete patio which serves as a sleeve, holding up my large shade umbrella. The umbrella needed to be replaced, but none of the new ones would fit in the sleeve. I designed an adapter which would fit over my existing tube and would add an adjacent sleeve for the new umbrella. Pawl fabricated it for me. His work was perfect, with great attention to detail and with great care for the aesthetics. It's a beautiful job, and he's a pleasure to work with. He did it immediately btw, and in record time, and his price was very reasonable.

I am a general contractor and was in a hurry to fabricate a steel support system for a suspended…read morestone peninsula for my client. Paul was courteous, fast and helped me improve my design while doing an excellent job on the metal fabrication. I was also impressed with the metal artwork on display. Clearly they are capable of very sophisticated metal work. I will definitely work with Steel Werx again.

He's the guy to go to 1000% Awesome work and cool guy to work with. Definitely will recommend him…read moreto anyone I know. Best turnaround time as well.

So my second time here and this guy never sease to amaze me .I broke the weld on my aluminum boat…read more Came here and back on the water in less than 1 hour

Juan and his team were excellent. I came to them with rough drawings for a really small project for…read moremy kitchen (I needed them to create an exact copy of an existing range hood cover with some custom tweaks and some custom gas range trim kit pieces) and they executed my ideas perfectly, pointing out problems with my designs and also willing to help revise and tweak the final product as well. (I had to make a stainless steel version and then swap to aluminium due to the weight) Throughout, Juan was straightforward and honest with me. Definitely would come to him and his team again for any metalwork I need done!

We hired Yes Welding to design and build a fully custom railing for our deck, and the result…read morehonestly exceeded our expectations. This wasn't just a railing, it feels like a piece of modern art. The lines are incredibly clean, the welds are flawless, and the whole structure feels rock solid and beautifully finished. You can tell right away that this is true craftsmanship, not off-the-shelf fabrication. The owner has a real artistic eye and helped us design something totally custom that fits the space perfectly. He paid attention to every little detail and treated the project like it was his own home. Super professional, communicative, and just a genuinely great guy to work with. Quality like this doesn't come cheap, but when you want something done right and built to last, it's 100% worth it. If you want master-level metal work, Yes Welding is the place to go. Highly recommend.

John's attention to detail is A++. He loves what he does and it shows in his passion and quality…read morecraftsmanship. I look forward to the next project. Thanks again..parts fit perfectly..and appreciate the quick turnaround!

They lost the parts basically…read more So I own an old overland Japanese classic van and I needed to have two plates tapped for PSI and Temp sensors to view the metrics on a gauge. I go in to ask one of the workers Pierre if he was able to do the work. I can understand a business can be busy and can't get to them but the time span to drill two holes was 3 weeks going on 4. So the first week they've had them nothing was done because I get it "they're busy". Next week I come to check the plates are too hard which I've been telling them because it's made of spring steel. That's fine they said they'd have them annealed and then drilled and tapped. I follow up the following Thursday of week 2. John pulls me outside to tell me literally the same thing or they have an engineer coming in to remake the plates in a softer material. I just needed to message him what operating temps the plates need to be at. Then he told me to follow up on Monday. Okay sounds like a plan right? No. I follow up on Monday over the phone and he says "they need to be annealed" Right exactly what you've been telling me I get that! He says "we'll get to it tomorrow". Okay I wait a day because it sounds reasonable that he'd get to them. The following day after I come in because at this point if it's not done then I want the plates back because I'm done waiting on someone who's never going to get around to it. I come to see john and he says he can't fine the plates! I've previously told John that these plates have been with machine shops for 3 weeks and now it's been with John for 3 weeks going on 4 and now they're lost. I know this is not the intended outcome for both parties but you can see my frustration. I've never been contacted from him about the plates it's always been just me reaching out to check the status. Losing them was the last of my patience I just ordered a new set.

I had a project where I needed custom cut piece of sheet metal to create a magnetic whiteboard for…read moremy kids room. My contact at A & J was Suki, who listened carefully as I explained the application and then made some recommendations about the thickness of material and quoted me a very fair price. When I picked up the piece, I was surprised to see the attention to detail on the finish. Although I had not asked for it, all of the edges had been rounded. When I mentioned to Suki how impressed I was and that I hadn't even asked him to do this (since I was on a budget and wanted to keep the cost down. I had planned to use tape along the edges.) he said that since he knew it was going in my kids room, he wanted to make sure there was no chance they would get injured. Outstanding work. Chefs kiss!!!

SUKHDEEP from A & J Precision Sheetmetal was very helpful when I was in need of some sheet metal…read morefor some repairs I was working on. They carry aluminum, steel, galvanized steel or stainless steel, depending on your needs. As you'd expect they also come in many different thicknesses. SUKHDEEP helped me find the right thickness for the work has doing since I was planning to do the bending myself. Would definitely recommend them for all your sheetmetal needs.

I was very impressed with their service. They were quick to respond to both texts and calls, and…read moretheir communication throughout the process was excellent. The service was fast and efficient; my project was completed within a week, and the welding itself only took a few hours.

What a find! I have employed Brian's Welding for two projects at my home, both a little on the…read moreeccentric side. The first was a custom made gate that was a copy of one that I had seen on a brownstone in New York, a relief of the Man in the Moon with a rocket projectile stuck in his cheek. Not a simple thing, but Brian arranged for an artistic metal shop to mold, cast and stain the piece. That was probably ten years ago now. I smile every day when I look at it. Recently I called upon them again to build a steel shelving unit in my garden on which to place large cymbidium orchid planters for display and shelter. Super happy with that job too. I also must say a word about the company culture. Everyone who I have met there is uniformly, courteous, informative, helpful and downright friendly. Everyone appears to be happy to be there. Brian and Diane definitely know that any business is all about the people in it. They have created a wonderful company with wonderful employees.