I was looking for to do some work on my geo metro head. other shops were pricey, he got me quick!…read moredid outstanding work. And got the head back in no time. I couldn't have asked for better customer service. I will only be going through him from now on.

Today I had the pleasure of meeting Rob. First, I would like to say he is very personable and is…read moreextremely knowledgeable about cylinder heads. His shop is set up with all the modern equipment to do his work. This guy went ABOVE and BEYOND to help me. I would rate him with10 stars if I could and recommend him to do your cylinder head if you need. In my 80 plus years on this planet and being bamboozled by shady mechanics, this guy WILL Treat you RIGHT and do a Bang-up job. You Can't Go wrong with Louthan. Thanks ROB

Very cool and helpful guys. I broke the rod on a hydraulic actuator on an older tractor's bucket,…read morebut these dudes got me sorted out.

This machine shop gets an A+ review from me. I had an out-of-the-ordinary request which they were…read morehappy to oblige. Char is friendly and helpful along with Jeff who tooled my axle. It fit perfect and ready in 24 hrs! Thanks!

Welded a fix to an old convertible dolly for me that was my uncles. Great service and a fair…read moreprice. Highly recommended!

My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

I had them turn my crankshaft last summer it was $75. I called them March 2025, less than a year…read morelater and they quote me $230 like with. I'm having to have it redone cuz they told me the wrong size bearings.​

The absolute worst machine shop in the Area! AVOID AT ALL COST…read more If this review stops just one single person from getting ripped off, then I have done my work. Go to literally ANY shop but this one: So i brought an engine block down to this place to have it looked at, cleaned, honed, and one rod resized/honed. I spoke with the gentlemen at he counter about the engine and how long it would take to complete the work. I was told 1 to 2 weeks tops. Well that fell through. Way through. Throughout the next 6 MONTHS after dropping off the engine, I called and checked up on it about every 2 weeks. Every time I call it's the same story. "Oh we got busy this week, so we will have it done next week for sure... So I speak with Rick on the phone on thursday 1/20 and he says he will have the engine done by monday the 24th at the latest. I call on friday and he tells me the block honing is done and its now in the tank getting cleaned. Monday it would be ready to pick up. So monday rolls around, I drive to Salem to get the block and the guy at the counter doesnt know where my engine is or if it was even done. Very odd considering the engine block was done on friday... so he says he will call Rick and check on the engine. So i go get lunch A few hours later, still no call. I live in another city and drove all the way down there for this. Today's trip ended up costing me $15 in wasted gas. So I drive BACK down there and the old guy at the counter proceeds to tell me that the block honing hasn't even been started. No physical work. No machine work. No honing. No cleaning. Nothing. "But I can have it done by tomorrow" he says. No thanks So I tell him to just give me the engine back and I'll have another shop do the work. He proceeds to get even more rude about it. We're talking about the worst customer service you can give to your customers. Then he tells me he wants $150 for the "cleaning and checking" to release the engine. If you had infact done something to the engine, I wouldn't have a problem paying for the work. The classic ol bait and switch deal here. Charge the customer for services that were not completed. Typical oil-change shop type of scam. My lady asked a question regarding the cleaning and checking and he proceeds to yell at her. Mr. Tough Guy are we? Is that how you treat the other women who come into your shop? Did you talk to the other lady standing there waiting to collect her parts? Well you're about to get a rude awakening buddy: 1. The block was not cleaned. It was actually DIRTIER then when I brought it down there. 2. No work was done in the 6 months they had my engine. Only unfulfilled promises, false dates and lies. 3. This place is disgusting. Have some respect for your business and your customers parts. This place is diiirrttyyy. Sweep the floor, clean your work stations, organize the pile of scrap engines strewn about the shop, bag/wrap customers completed parts. Your done shelf is full of parts covered in dirt/dust/debris. Is someone suppose to take their parts elsewhere to have them hot tanked before assembly? 4. Hire someone new. That old guy is killing your company. And if he's the owner... you should be ashamed of yourself. Customer relations is obviously not your strong suit. I'd fire you immediately at my shop. It's a wonder you are still in business. 5. Dont give timelines that you cant meet. Especially if you're going to spend 6 months doing absolutely nothing on a job that any shop worth their salt could have done in 2 or 3 days tops. It's a shame your company is doing business this way. The way you treat your customers and how you talk to women is a real disgrace. The Salem area doesn't need business like this ripping their customers off. I'm part of a very large group of Car enthusiasts (read: tens of thousands of people) who routinely have extensive engine work done. Many of them send me their cars for the work . And sad to say. Your shop is on the chopping block. I'll make damn sure to let every single one of them know

These guys can fix anything. Great and rare all in one machining and fabrication shopread more

Brought my car in for diagnostics because the engine light came on. They told me it would be $1800…read morebut was not clear about what that was for. I came to pick up my vehicle without having it repaired and they charged me $338 for a diagnostic, the guy is a CROOK. Don't bring your car to this place! Bad news!!!

Had my flywheel turned and he did an excellent job and was able to get it done the same day.read more