Absolutely the worst service! I brought Jerry a drive shaft for a simple what should've been about…read morean hour repair. I specifically told his son that if it couldn't be taken apart to just cut it and that would work. They proceeded to spend six six hours trying to fix it without my knowledge or consent. When I finally talked to him he said the charge was $720!!!! I spoke with another tractor service and they said I could buy a new one for $200! This guy was so belligerent he finally said he would give it to me for $400 still way overpriced! An absolute thief save your wallet and go somewhere else!

OK I am back to up date review, yesterday 10-15-2014 I had to contact Jerry Elennis owner of LNS…read moreWelding as apparently he does not understand the concept of DBA for IRS purposed.... creating unnecessary paper work for others. ,,,,,However about the gate well .... LNS Welding started on a 2 day gate install on 6-6-2013. However 3 months 3 weeks, and 4 days later.... The job was finally finished, or so I thought. Boy was I wrong, several returns, over the next 4 months, by Jerry Elennis, (meaning the gate sometimes worked and sometimes did NOT work.... Mostly NOT) Jerry would arrive sometimes as scheduled sometimes not, but always with another reason why the gate was not working.....defective panels (really 5 of them ), magnet It finally operated for more than 14 days straight..... Thank God......Oh no, no, no, ... me always the optimist spoke to soon .... what is that god awful....ear piercing noise....that went on for hours with no way to stop it. I tried turning of the circuit breaker to gate....emergency switch for fire department (which is suppose to ALWAYS work, but did not) Nothing would shut this screaming gate noise up. Then my savior " MENDOCINO METALS" arrived on an emergency call to fix the scream noise, in panel disconnect wires and silence dear god silence ..... After they evaluated the BROKEN GATE installed by LNS....another new panel was ordered, (the same panel from the same company that LNS replace 5 times ) So defective panels????? I think NOT. The front loop was disconnected as was an issue, batteries replaced and rewired properly, timer fixed....... YES it works no problems, when it rains, when its foggy, when it opens (on time), when it closes (on time). Randy from Mendocino Metals was on time, quick efficient, knew his shit, cleaned up his mess..... So the end to the gate story is now after paying Mendocino Metals .....$ 1069.17 to repair a gate less than 1 year old that cost $ 6950.83 originally from LNS Welding......I say go to Mendocino Metals to start with ...great company, great guys.... great work.... They just install another electric gate at the other end of the complex in 2 days start to finish....up and running.....NOT ONE ISSUE. Do your self a favor stay far far away from LNS welding for electric gates!!!!

The rudest, most incompetent, inconsiderate, nastiest, mean woman answered the phone when we called…read morefor a service appointment! She is known for this & has cost this business a lot of business with her attitude! We have been doing business with Branesky's for over 20 years. Two years ago we paid close to $8000.00 for a brand new gas heater from this business! The minute my husband asked for a service call whomever this unhappy woman is she went off on him. I was actually embarrassed for her as she was such an extreme asshole! Think twice about using Branesky's. We never will again! I wouldn't have even given them 1 star but I couldn't post if I didn't at least have 1...

Needed a new chimney cap for our wood stove, they had several sizes in stock , competitively priced…read morewith what you'd find online, here in town, helpful, friendly service,. Good advice and a good price! Thanks!

These people are the best! Thank you Reggie and Daren…read more You really fixed up my aluminum boat transom and worn out boat trailer. you will not go wrong at woodys weld all in fort bragg John & Kathleen 1988 westcoaster

Vastly Overcharging like most all fort Bragg business…read moreWelding is a simple matter and straight forward these guys charge like your getting surgery and have no insurance they have dollar signs in there Eyes

This is the place to find all your metal fittings, from hinges to red heads to post caps to…read moreall-thread. I got a great deal on a vice that came with a baby sledge hammer. They carry industrial tools like drill presses. I bought steel 2x2 posts for my driveway gate, and a steel 5/8" thick L-beam. Back to back with B&B Industrial is Daniel Steel, where they will fabricate anything for you that can't be found at B&B. Together, they can fulfill all your metal and steel needs. Always friendly and helpful.

From the moment I walked in the door, I was greeted with a smile and asked if I needed to be…read moreassisted. Being a lady I thought the employees would treat me as an idiot. Much to my surprise I was completely wrong. They went out of their way to ensure I was comfortable and most of all happy. I would not hesitate to recommend this shop to all of my small business colleagues! Thank you

Chris came out in November of 2018 when I wanted an automatic opener for our driveway gate. He…read morelistened to what I told him and actually suggested a much lower cost solution than I had asked for. Then, just before Christmas in 2019, it seemed like the batteries weren't getting charged by the solar panels. Chris came out and determined that one of the panels had failed. He replaced it and the gate works great! It can be rare in Mendocino County to find a tradesman that shows up when he says he will, provides quality products and service, and stands behind their work. AAA Welding is one of those businesses!

We were 4 weary travelers on an 11 day disc golf adventure and by day 5 we had already damaged our…read moretrailer hitch with a gauntlet of dips and bumps on the way. While in Lakeport, Chris and AAA got us back on the road quicker than expected and with a very reasonable price. His use of the tools in his shop was truly professional as well as his customer service. The view from the shop of the local mountains was nice during the repair as was the custom "American States License Plates" mural. Thanks again Chris, this is a no brainer 5 Star Operation.

The owners of this company charged me thousands of dollars for Stainless steel work but sold me…read moreregular steel. Their sub-par work is rusting all over my new concrete and staining it. All of it has to be replaced. I would never use this company for anything again.

We bought the gate kit a few years ago. We finally discovered Davis Fabrication installs gates!…read moreDaryl came over to look at the system we had. He looked at every detail and said he could do it- even though it was different than what he uses. He did the work and we are most pleased. Daryl is prompt, conscientious, and respectful, as well as his crew. I plan on hiring him again and would recommend him to everyone! Barbara

I had a broken strut on my elliptical. Called Rick on Thursday, discussed the fix. He said he would…read moremessage me on Friday to nail down a time Saturday morning. He messaged me Friday afternoon as promised, showed up right on time Saturday morning and completed the job in about 30 minutes. Told me he built up the weld as reinforcement. Weld was a work of art. Thanks Rick! I am sure I will call you back when the other strut fails...

High-Quality. Well-Priced. My New Go-To. Rick re-welded our…read morebent jack stand bracket on our dump trailer after one of our guys hit the trailer with a forklift. Rick offered to do the work same-day, but I had to put it off until the next day. He did the work quickly, the work is high-quality, and the price was fairly priced and lower than I thought I'd almost ever find. Need something welded? Call Rick.

I have been working with Jerry and Keith for years on projects for wineries.Their work is perfect…read moreand the service is exceptional. They are always available and go above and beyond to meet my expectations. I highly recommend using them, you will not be disappointed.

From the owner: Specializing in: - Machine Shops…read more- Welders

My wife and I decided we should invest in handrails for various area of our home. We…read moreprocrastinated for years until we both had episodes of being a couple of degrees off center - wait no more! I'm big on using Yelp - all roads pointed to Onspot Welding & Design. Made the appointment, Chris arrived, listened to our concerns, saw our needs. Took his initial measurements, a few days later we received Onspots bid. Chris let us know it might take as long as 4 to 6 months. We'd already been in the home 38 years, what's a few more months for something we need. Chris came back for a second measurement (measure twice, cut once), then one additional time to to select the handrail style, end cap (whatever it's called) and primer color. Six months later (Today), Miles and Ben delivered and installed everything - we love the results! Thank you Onspot Welding for the craftsmanship in our product, the wait was worth it. Check out their website - if your imagination can think of an object that can be made with metal, they can do it.

These guys are simply awesome and a pleasure to work with. They have a great competent team…read more Their quality of work is great.I had three quotations for my project and their bid was the most complete and most competitive.They are a one stop shop.

We were driving down 101 in our motorhome from Eureka en route to Cloverdale and my husband was…read moreengine braking to slow the rig. The decompression sound suddenly became very loud and we had no idea what happened. We pulled off the highway into Cloverdale and looked for an auto shop we thought might be able to check it out. We went to Coverdale Automotive & Tires, but they don't work on motorhomes. The guy checked underneath our rig and said the problem was our muffler, which had separated. He sent us to Fletcher Fabrication. It was close to quitting time and the guy at Fletcher had an appointment about to start. He had us pull the rig up to the shop and said he'd be out within 1/2 hour. He said the weld bead between our catalytic converter and the exhaust manifold had separated and it appeared to not have been properly welded from the factory. In about 15 min he had us all fixed up - and after paying him $40 we were ready to go. We came by the next day to drop off a 12-pack of beer as an extra thanks. They were helpful, fixed our problem quickly and charged us only a small fee. It was the cheapest repair we've ever had done to our RV!