I have included what is fraud on their mechanics' part, I feel bad as their sales staff has been good to my family but if the mechanics are crooks then it is time to run away. Look at the pins of the Mass Air Flow Sensor pictured. I come from a generation that worked on their car and 1'm not part of the participation trophy generation. So if you look at the picture from Left to Right there is 8 pins, pay attention to pin 8 all the way to the right, if you force the connector in that is what would happen to the pin bent flat. Why? The wiring harness is a flat plug with 8 holes, I made sure when I brought the part the pins were all straight, and when I installed it, the harness slipped in without issues. Here is the fraud, look in the middle to Pins 3, 4, & 5, there is no way the harness would have ever seated correctly and I drove to the dealership with this Mass Air Flow Sensor so how were Pins 3, 4, & 5 bent like that? FRAUD! Look at the shape it looks like a pen was used or a Philips Head Screwdrive you know what you need to use to remove the two screws holding it in place. I want Paramus Chevrolet to contact me but I know they are cowards and they know they are probably caught and will not address the issue. They scrambled and panicked when I asked them for the old part. Alway request your old parts good mechanics are not crooks and they will show you what they replaced. Do not trust them Paramus Chevrolet for mechanical work!!! read more