Great people and great work they do excellent work and pretty fast results and good advice on repairs 5 stars

Jared took care of my small fab fixit job in a timely manner. The work was excellent the part is better than new. read more

Needed stops for my utility trailer so tie down ratchets wouldn't cave in the sides. I called and they were able to make the addition the same day. Their work was clean - weld beads were tight and uniform. All the slag was chipped off and they even rounded the edges of the stops to eliminate any sharp edges - considerate and understood exactly what I needed and at a fair price. Two thumbs up read more

This shop fixed my locks when other shops whined that it was too hard. When I picked up they were 95% perfect. Most shops would be just " Ship it baby!" And move on and cash check right? Jared asked me to stay a few more minutes and made it 101% perfect. How common is this in 2022? Their quote was fair and they were on time. They even diplomatically explained that my strategy to fix wasn't the best and it came out perfect read more

Bill is the real McCoy! I read the review below and decided to see if Bill could help me with a metal piece I needed to create. I told him what I thought I needed, he quickly analyzed the situation and showed me a better way he could build my idea. When I arrived to pick up the part, I was amazed at the work he did. There was some very detailed welding that needed to be done and he far exceeded my expectations!!! This guy is an artist with a torch. Not only does he do small jobs like mine, he also does work for the city. Bottom line if you have anything you need created out of metal, cut, shaped, or welded, his prices are very fair and he does not comprimise on quality. These people are far and few between. As to the post below, I did not find his shop to be dirty, it seemed like every other welding/fabrication shop I have seen and appeared organized. But who cares his work is off the hook :-) read more

Had a very small repair project. Walked in, they took a look, made the fix, and I was out of there in less than 10 minutes. Great experience. read more

I called Bill this morning inquiring about having some metal plates made for a pergola that I am building. He said to stop by and he would look at the project and might have them done by the weekend. I stopped by and showed him my plans and he immediately went to work cutting the plates and punching out the holes for the bolts! He had it done in less than an hour while I waited! Great service, great product and a reasonable price! Wow! I love a place that under promise's and over performs! Bill and A1 Fabrication is the best! Thanks Bill! read more

I needed a very minor repair, which Bill did while I waited. The equipment and works-in-progress in the shop indicate he usually does heavier work, but he willingly took on my trivial job. I'm very pleased, and will surely be back. But beware: he only takes cash or check. read more

After reading all of the reviews, I decided to take my small project in to Bill. I can't add anything that already has been said. Bill took my job on the spot and fixed it in 5 minutes or so and I was on my way. Very reasonable on the price as well. read more

I was pleased to find a metal fabricator in my area to solve a problem with my metal pendant lights. They were able to increase the size of the opening of these units so that I didn't have to settle for another IKEA fixture. I am grateful to have solved this issue as I am not quite ready to pull my ceiling unit and begin from scratch. Electricians are expensive. This fix? Not so much. read more

This guy rocks and he can weld anything! Bill, the owner, knows his stuff. I've taken old metal chairs, a metal frame, and one of my stainless pots to him for welding repair. He almost always has cars in there and he said he does back-halfs (whatever that is), tubbing, transmission cracks, and some other stuff that I can't remember. I've also seen him work on wheelchairs and motorcycles. His shop is dirty but thankfully I didn't have to wait there for my things to be done. He doesn't seem to have any employees and, even though he's by himself, he always tries to get my stuff done within a few days. read more

Helped me out with a small project that was too small for other shops. Did have to wait 2 weeks, but I wasn't in a big rush.

Bill is a lifesaver. I had a small repair job that needed a weld. When I went by his shop he dropped what he was doing and performed my repair on the spot. Great guy! Don't hesitate to give him a call. read more

I was working on a small job and needed assistance, contacted A1 and received quick, efficient and friendly service. Quick turn around time on drill holes I needed and excellent price! Highly recommend! read more

I needed a very small fabricating job done on a Saturday morning recently. After reading A1's Yelp reviews, I called. Bill said that he was not open, but would be there for a few hours working on something, and if I wanted to bring my project by, he would take a look at it. He warned me about welding on my 4Runner frame, and had another idea - to fabricate a steel plate to attach my oil filter relocation part to, and then bolt it to the frame, in an already existing threaded hole, just where I wanted it to go. He set about making the plate from a large piece of sheet steel. Took him almost an hour all together. It was perfect - exactly what I needed. We talked about stuff while he was working. Bill is super friendly, very accommodating, and an expert creative welder and fabricator. He was also super fair on the price for what he did for me (he takes cash or check only). He could have charged me more, and I would have been OK with that. If I ever have something like this to do again, I will call Bill for sure. He is the best. Thanks again Bill!! read more

I bought a new brew pot which required me to have a thermometer and a valve welded in place. Being that it was stainless steel I needed a professional. I FOUND one at A-1. They did a fantastic job and they took the time to produce a perfect weld that looks great and eliminated the need for use of the crummy leakey rubber "O" rings sent with the brew pot. No leaks , no hassle, no waiting. They did the job in a matter of minutes, and I was on my way to get the brew started. I would recommend A-1 fabrication and welding to anyone who wants the kind of great service and attention to detail that is hard to find these days. I would not hesitate to take ANY future welding I need done with confidence to the folks at A- 1! read more

We hired Bill to do all the welding on a big steel project and he surpassed our expectations. He is very professional and adapted great to changes that our engineers threw at us and never missed a beat. He is a great team player and our crew really valued him on our job site. Looking forward to doing future business with Bill. read more