Mr. Aleman does some great welding specifically Aluminum welding his prices are very affordable. I…read morepersonally done many different projects and some trailers welding repair. While other folks dance around pricing he gives me a solid price and gets the job done.

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

Mitch came out to meet with me to discuss my 35 yr. old gutters. I liked him for the moment we…read moremet! He was very friendly, honest and professional. The day before Mitch came out, we had a tree removed, which was close to the house, and with leaves that caused the gutters to clog and finally pull away from the 2nd story fascia. I thought that the quote I received to remove the hanging gutters and replace them was fair. I authorized the work to be done that day. The crew showed-up at the appointed time, and completed the project exactly as I wanted! The entire team at Socal Sheet Metal were easy to work with, accommodating, knowledgeable, and experienced. I appreciated how easy it was to work with them to get this project completed and my house back to normal, and ready for any future weather conditions. I highly recommend Socal Sheet Metal! Very satisfied!!

Just had the gutter installed. It looks great, everthing went well…read more Installers were fast and neat. Mitch, the one that gave the quote for the job was great. He keep on top of the job from start to finish. There were no hiccups nor changes in the price quote. I will wait and see after the first rain storm to see how well the gutter performs. So far I'm happy with the results. If all goes well during the next rain Strom, I will definitely recommend SoCal Sheet Metal.

I recently came in for a custom chase cover & everything was very smooth. Thank you so much Kelly,…read moreyou were awesome!

I highly recommend Chamber Sheet Metal. Bob and Kelly are amazing to work with…read more I was referred to Bob from a commercial air conditioning shop as many of my HVAC requirements were not off the counter. When I started my journey, I didn't realize that the builders had not maintained a consistent approach to framing and therefore I had to have modifications to my HVAC ventilation system. Bob took the time to explain the intricacies of what I needed and then fabricated them for me. Did I mention he also gave me a phenomenal price. When you find an establishment which has integrity and fair play, you simply take the opportunity to work with them. I'm grateful to have met Bob and Kelly. I would definitely take all my sheet-metal business to Chamber Sheet Metal.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

Jaime is a great guy. I would not put any weight on the one negative review, it does not match my…read moreexperience at all. He was transparent from the start, took on my random job without hesitation, and delivered exactly what he said he would. He is knowledgeable, competent, and easy to work with. I would highly recommend him to anyone I know.

This shop is a gem in Canoga Park…read more Andrew took on a small job drilling and re-tapping some frozen studs on a NLA Porsche wastegate, bringing this part from unusable to like new. Fast turnaround and great communication as well.

It's hard to find a place willing to take on small jobs, but Andrew handled mine quickly and did an…read moreexcellent job. Great quality work--highly recommended!

J and R does some excellent fencing and ornate gates. I have had them do a side gate, a side door…read moreand then gate my whole front yard. At first I felt like I was in jail but then I realized how awesome it was to keep people 65 feet from my front door. I used to have a problem with all kinds of unwanted sales people coming to my door at all hours of the day and night. Not any more, plus it looks kickas Try to get them to come back for service,,,,,,, Forget it! $23,000 I spent with Mario and Sally can't even get him to return my call now that my nice fence has rusted to crust...nice!

we went to West Valley welding with no appointment just as a walk in. Rudy was very willing to help…read morewith a very small welding issue. However, it took much more time than we thought. The parts brought for him to repair was from China and not good material for USA welding. But he was persevering and innovating and finally got it repaired. He's spent more time on it than we thought he would have to. he was so helpful. I'm grateful for him to be willing to help. Dennis

Great welding shop that does everything from small repairs to the steel fabrication necessary for…read moreremodels and construction. The Owner is hardworking, honest, and trustworthy.

I went to Galan Straightening to have a forklift fork straightened. Their minimum is $125 and…read morecomparable shop rates are $60/hr. The job took about 40 minutes and then they presented a bill for $320 I was completely aghast at that price. When I questioned the bill I got all sorts of explanations and justifications as to why that was a fair price.....including that I was asking for a rush and that I was paying for their expertise. The woman that handled the order never mentioned a rush charge but only that it would take about an hour. And the reason you go to a business that straightens things is because thats what they do..... of course Im paying for their expertise....that's what businesses like this sell... their expertise. A 40 minute job should have cost the minimum $125. How did the bill ever get to $320. I know bad business when I experience it and this was just plain bad business.

From the owner: We are a precision metal straightening services company. We provide precision straightening of…read moremachine parts & extrusion, tubes, plates, welded assy., fixturing, after plating or finished parts, etc. All sorts of metals.

We hired Zeus Ironworks to replace the railings in our condo. Brian was very helpful at every step…read moreof the process. He came over to take measurements and sent an estimate our way soon after. The railings were installed about a month later and we're very happy with the result!

I had an excellent experience working with Brian at Zeus Ironworks. I met with several iron workers…read moreinitially and was originally considering just reworking my existing railing bases, covering them with shoes, and painting them myself. After talking through the project with Brian, I realized that creating a whole new custom railing was a better choice. Brian worked with me to design and fabricate a completely new custom railing with a powder coated finish, and the end result exceeded my expectations. He was incredibly thorough and detail oriented, coming out multiple times to take precise measurements and test fit components to make sure everything was exactly right before final installation. It was clear from the start that he genuinely cared about the quality of the work and about getting the details perfect. His craftsmanship is top-notch and the railing completely updated the space. Brian was professional, communicative, and just a great guy to work with throughout the entire process. If you're looking for someone who takes pride in their work and treats your project like it matters, I highly recommend Brian at Zeus Ironworks.

We just had a crash guard repaired and re-chromed for our motorcycle and Supreme Metal Polishing…read moredid a FANTASTIC job! We could not be more pleased. They also had the best price in town so run, don't walk for your chroming needs! Check out the before and after. You can't see the extent of the damage but it was also scraped badly in the bottom. Perfectly restored!

These guys are great. They do an amazing job, they are honest and were even helpful with some…read morequestions I had about polishing some other parts myself. Not only did they do a great job polishing but they were able to straighten out some bent stainless trim for my 63 olds. I have used other places in the past but had problems. I recommend these guys 100%.