I needed a custom part made for my car using 60601 aluminum. The owner was able to order the…read morematerial and makes two units of the part I need in 2 business days, which is awesome. His lead time and price was cheaper than big company's like Xometry by a long shot. I was very happy working with the owner. He was a very nice man to work with and built everything to my exact specifications. Finding a machine shop locally these days is really hard. I'm happy I found this place!!

I would not recommend perfect machinery in cypress, I had some parts made and they looked mediocre…read moreat best. Very uneven and sloppy craftsmanship.

I took my horse trailer to get the wiring fixed. It has been sitting for a while and needed to be…read morefixed. T & T had it Tuesday afternoon(they do not start working until 4pm), Wednesday and Thursday and told me it would need to stay the weekend to get a couple more days to figure out the problem. Every time I talked to the owner there were more and more things wrong with it. They said the brake was cracked in 3 places, the welds on the bottom of the trailer were broken, the wiring needed to be completely pulled and redone. They couldn't figure out the 6 pin plug so they switched it to an RV plug. I went and picked it up tonight because I had a gut feeling this was going to end up being a tsunami of cost with all the things they were saying was wrong with the trailer. This is a 4 horse HART aluminum trailer. Only used for gymkhana's a couple mile from home for a couple of years. It came home tonight, way worse than it was taking to them. They charged me $1050 - $250 for each side of the trailer to repack wheel bearings. And $600 for their diagnostic of all of the horrible problems they kept finding. They fixed nothing on the electrical except to switch the plug so the brakes on the trailer stuck and I could move the trailer with their plug hooked to my truck. This was an absolute nightmare. I used to go to T & T to get all my maintenance done. I did not know it was sold. I wish I has known. I am so glad I got it out of there before the could charge me even more. Oh, and the owner kept telling me he had picture of all the problems they found but showed me NONE of them.

This is my experience @ T&T welding on 10/18/2024 I paid…read more$150 to get my High pressure hydraulic steel line repaired, Scott said it was no problem and he will get the job done. Still leaking and I was still charge $150 he stated that his worker was on it for an hour and a half this is unacceptable. Still Leaking Look at the welds please comment .

We needed a custom stand for a hose reel in our work truck. Not a big job, but David took it and…read morecompleted same day!! We are so pleased with the quality of his work, great customer service and fair price. Will definitely recommend and use in the future!! Thank you Rustic Welding!

DON'T BUY HERE! Refill elsewhere!…read more BEWARE: They overcharge customers to refill gas tanks. Even if your tank is somewhat full, they charge you for the full tank (overpriced gallon) + tax + service fee! Bottom line, you pay about $30 for a 5 gallon gas tank empty or semi-full. It's a scam!

I only come here to get helium, but guys in the shop have always been courteous and helpful. They…read morealways answer any dumb questions i have and been very honest about the way they handle business. Probably will continue coming here. WELDERS. They seem to have a wide variety of welding equipment. Tools, machines, protective gear, etc....

New carburetor installed, runs great! I also installed a new spark plug and changed the oil. It…read morestarts on first pull.

Hi Tech.Pressure Washer Repair is the best pressure washing repair shop in Orange County…read more The owner, Arturo, does a fantastic job and has always been immediately available to fix my pressure washer when it breaks down. You see, my business relies on 1 pressure washer, so anytime it breaks down, I lose lots of money, customers, and time. So, when the inevitable breakdowns do happen, it's critical that it gets repaired right away. Anytime I've had an issue with my pressure washer, Arturo and his team have been on top of it and get me back on the road immediately. There have been multiple times where my pressure washing broke down, I brought it in the same day, and Arturo made sure it was fixed and I was back on the road to service my customers right away. He always goes the extra mile and takes care of me and my equipment. There have been a couple times my pressure washer has broken down in the middle of a very busy workday, and I had to urgently bring it in for repairs. Despite Arturo having a super busy schedule and multiple repairs at that time, he always took a look and fixed my pressure washer that same day. There are little to no businesses where you will find someone as dedicated and helpful as Arturo is. Especially in the small world of pressure washer repairs. Before finding Arturo & Hi Tech.Pressure Washer Repair, I went to another well-known & highly reviewed repair shop I'm sure you've heard of. But I always felt like I was getting ripped off. They charged me and arm and a leg and couldn't even figure out that my pump was broken because they barley tried to look at my system and address the issue. I also tried another large corporate repair shop in the Anaheim area and couldn't get an appointment for a week, they told me they would have to take my equipment off my truck to repair, and they charge a butt load. I've never had the problem here. Their rates are extremely reasonable, and unlike anywhere else if they missed something they take care of it and don't overcharge you. I have a semi-complicated setup yet they can figure it out unlike the other shops I've brought it to who hardly look at it. If your business relies on your pressure washer, you can't find anywhere else better than to get it fixed here. These guys are simply the best. Bring them some 805 while you're there...!

Immediate service rings true here even if they are a bit busy inside. I didn't wait long to be…read morehelped out and even with many other customers there, they had my hose made out from the back in less than 10ish minutes. Thank you for my new rv propane hose replacement and for being quick as possible in assisting me today!

Get your estimate in writing or your final price could be 60% higher than the verbal quote. I was…read moretold $100-$120. When I picked up the AC line the invoice was $178. I told the manager what I was quoted and the best they would do is discount the hose to $163. I'll never do business here again, and I tell every car builder I know to go elsewhere.

Been going to Karl's machine shop for years, great service. Rick is an awesome guy. Very good work.read more

It was my first time going to a machine shop to get a Volkswagen AWM 1.8T cylinder head decked…read more Luckily, Rik there helped me out. I didn't know you had to remove a lot of components and pretty much get to the bare head. Well, with his experience, he was able to close the valves and get a good clamp on it so he could get a clean cut on the head. He called me back in a couple of hours once it was done. From the decking process, lots of aluminum material gets into the nooks and crannies. I had to use an air compressor to remove most of the loose aluminum. I was able to install the cylinder head and now that car is running with no issues with leaking from the head gasket. Excellent work and a great price! I'd go back for more work to be done.

This shop is my go to shop for all my welding needs this guy stacks dimes like no other the best in…read morethe business Facts!!!. Thank you Ryan for thanking cares of me my customers are very happy with your work see you on the next one.

Two years ago, I was scouring to find someone who could weld Inconel. For the E9X M platform, BMW…read morecreated a M Performance exhaust made of Inconel, which was prone to cracking when paired with test pipes or catless x-pipes (this was rectified with V2 that has holes on the muffler to ease airflow. After learning about Humble Engineering on Bimmerpost, I reached out to Ryan, the owner. Many others have also experienced cracking and welders not accustomed to Inconel usually made matters worse by chasing the cracks and making a mess. Not the case with Ryan! We promptly scheduled a time. As I purchased a V2 of this said exhaust, the one with cracking was already off my car. That made our appointment simple. In ~20 minutes, Ryan welded the multiple cracks I had and tested his work to ensure no crack a have been missed and there'd be no air leakage. I was quickly able to sell the fixed exhaust on Bimmerpost. Thank you!! Throughout the process, Ryan explained to me the tools and materials he was using, as well as the process. Phenomenal experience working with Ryan. He is organized and courteous. If I need any welding or fabrication work, I will definitely return.