Always A+ service…read more Had my vehicle serviced I highly recommend Thank You for reading

I would absolutely recommend this business! Finding Ms. Kenni on here was one of the best things…read morethat happened to me in my car. She truly is an ultimate professional, and absolutely the friendliest, most helpful, and sincerely genuine! She is so knowledgeable and went through and broke every single service that needed to be completed down to me, so that I understood and we were able to come up with an implementation plan for completion at my pace. I cannot say enough good things about this shop and its owner. Her staff is also very knowledgeable and completed my repairs in a timely manner. She will go the extra mile to help her customers. Everyone who came into her busy shop received the same great level of care you could tell they were repeat customers. The shop is also great quality and value as far as pricing and work done. I will continue to use her and recommend her for automotive repair and Tire needs. I cannot say enough great things about her!

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

100/10 stars! Where do I start! Mahdi was absolutely exceptional. He was very respectful and very…read moreefficient. He accommodated my urgent need to replace my brakes and was at my house within hours of messaging him. He showed up when he said he was going to, didn't try to oversell me, he was very efficient and even went on a test drive afterwards with me to make sure that I was happy with his service. He's very trustworthy and me and my husband couldn't be happier with his service. I would highly recommend Mahdi to all of my friends and family. Thank you again Mahdi! I appreciate you.

As a car enthusiast, I rarely trust others with my vehicles, but Mahdi is definitely an exception…read more I usually work on my own cars, but working 60 hours a week makes it difficult to handle everything on my own. Hiring Mahdi was an excellent decision, not only because of his strong character, being personable, punctual, kind, honest, and patient, but also because of his knowledge and willingness to help you understand what is truly needed. I have a solid understanding of mechanics, and I can confidently say that Mahdi knows his craft. His service recommendations are honest and well thought out. His labor is priced very competitively, and he is transparent about his costs. I will definitely be booking more maintenance with him in the future, and I highly recommend his work.

I replaced my car's A/C system at home and needed a Freon refill. They were able to do it for a…read moregood price and they were very quick with the service. Also the employees were welcoming and encouraged me to reach out if I had any issues. I'd highly recommend their business.

Despite what the owner stated in the past, I've had my Ford worked on over there several…read moretimes.....all for the same problem.....the transmission! The 1st time I thought all went well, until when he had the car delivered, on the receipt was stamped 6 mos warranty! Well, after I authorized him to repair the transmission....he said that he would give me a 1 year warranty. When I asked him about the 6 mos warranty stamp, he said "no worries they made a mistake....I will honor 1 year." I paid him $3,200 for the job. WHO in their right mind would agree to only a 6 mos warranty after paying that much?! So, the car ran well for about 7 months, then transmission went out. I called him, and had the car towed back over there. He said that " you know it's out of warranty, but I will see what I can do". So now he forgets about what he initially told me! So, he kept my car for another 6 mos......dodging all of my calls, and making up B.S. excuses about why my car wasn't ready! When I got the car back he told me that he would not give me a new warranty! The car ran for another few months....then transmission went out again! Smh SAVE YOUR MONEY AND TIME! Oh, and he must know someone over here at YELP, because he had my 2 prior reviews taken down! Smh

Thanks for the amazing service. You guys Rock! I wish there were more sheet metal shops like you.read more

From the owner: Complete metal fabrication; Laser Cutting, Metal Stamping, CNC Machining, bending and assembly…read more We specialize in Steel, Stainless, & Aluminum materials

I have gotten many thing powder coated over the years and have had varying prices with varying…read moreresults. Full Throttle met and exceeded all of my expectations, providing a beautiful finish on the wheels and bumper I brought in. It's a family owned business and you can tell that honesty and transparency are core values to the business. I will most definitely be coming back!

Dropped off two pieces for powder coating...called after two weeks with no answer. Went by and they…read moreare out of business

I was looking for somewhere to refill my 10lb CO2 used for Sodastream. I came across this store on…read moreGoogle and gave them a call to see if they do refills and to get the cost(~$25 after tax for 10lb tank). The person on the phone was very friendly and helpful. When I came in the next day, the staff working here were so professional and so quick to help. Although this location is a bit further for me than some of their other competitors, it's worth the drive. Other places don't do same day refills or some only offer trade-ins for gas. This place has amazing service and everyone working here is so friendly. I was in and out of the place with my CO2 refilled within 15 min.! I'll definitely be coming back for all my refills. Highly recommend

As a hobbyist, I was intimated to get my tank re-filled (Never done it before) and had a couple…read morequestions (How does it work, how much, do I drag this tank through your store, how long does it take, do I need a hydro, etc). I was helped and had a new tank in less than 5 minutes. Had some abrasives questions and they provided their professional knowledge. Great store!

I hadn't seen Rob in years, but I had an emergency today--a 14-foot by 30-inch banner needed…read moreovernight for a 7 a.m. event. Rob answered my call, remembered me immediately, and said he could do it. I drove over to his new location and he printed it in under 25 minutes! His prices are unbeatable--he only charged $10, while FastSigns quoted over $500. Years ago, he helped me print a different banner, showed me how to install the grommets, and gave me a grommet kit--six years later, I still remember how to do it! Rob is a wealth of knowledge, and his makerspace is all about helping people learn, create, and even having a platform and commuity support to start making money. If you've ever wanted to learn how to 3D print, use a laser engraver, CNC router, drill press, bandsaw, vinyl printer cutter, or any of his amazing machines--this is the place to join. Sign up for a membership, explore workshops, complete projects, and empower yourself. Whether it's for a banner, group, or business, check it out--you'll love the opportunities here!

I needed to have a part 3d printed for my cat feeding station and was very excited to find a local…read morebusiness able to help me. Rob emailed me pictures of my part (which was very small) just a few hours after I sent him the request. He verified that it was the right size and that it looked appropriate and then had me pick up the next day. His communication was excellent. The part was ready when I arrived, along with a small printed cat which was very sweet. He was kind enough to give me a tour of the makerspace and told me the story of how he came to start the makers space. I really loved his mission and how he is clearly passionate about his work. After the tour he made it clear if I needed any changes or adjustments to the part, he was happy to help me. The part worked perfectly, and I was able to finish the repair within a day of it breaking, all thanks to Rob. I highly recommend his business, 3d printing is one of many other machines and services offered at his facility.