Alan was very arrogant with zero respect to a potential customer. He is not a nice person to work…read morewith and now I can see I'm not the first to feel like this. Very unfortunate

This place is great! I worked with Alan to get a small stainless steel plate cut for a control…read morepanel. He was most concerned about being able to do the job before moving forward. He was very professional and I'm planning to work with him on future laser projects. Just a note - If your project includes cutting into an existing product or other requests that may not come out at a high quality level Alan will have questions. (I think this is much better than plowing the laser into something and ruining it.) I want to address the low review from the engineering student - you should heed the lesson in how to not be a high-drama customer. The expectation that your on again / off again rush job is showered with time and attention from your vendors is a little entitled (unless you're paying them for it). I guarantee other trade professionals (e.g. machinists) will have a similar attitude if you pull that and they are not the problem here.

He's the guy to go to 1000% Awesome work and cool guy to work with. Definitely will recommend him…read moreto anyone I know. Best turnaround time as well.

So my second time here and this guy never sease to amaze me .I broke the weld on my aluminum boat…read more Came here and back on the water in less than 1 hour

Been coming here for a while now, both pre-Covid and after. Pre-Covid was OK, but largely hampered…read moreby the conditions of that time period. Since the remodel, it's been absolutely amazing. Great deals on remnant stock for small projects I have, started using it more for work and it's been a great resource in a pinch and save on shipping/material cost. Love coming here and just browsing, always find something new to keep in mind for another project later. Staff service has always been great as well, never had a bad experience with the counter people or people helping in the back. Had one instance where an order was sent to the wrong location, but was handled very well and thankfully it came at a time when it wasn't essential. Just had it shipped to the store and picked up later. No drama. Highly recommend this place if you need something or if you haven't been just to take a look around!

Been here a few times with my buddy but today I went alone because I needed something cut. The…read morestaff asked if I needed help and I told him what I needed. He crunched some numbers, found it it's cheaper for them to cut it for me vs me buying a bigger sheet and spending my own time cutting it to spec. They saved me hours of work for something that may not have turned out as nice as how they cut it. It took about 20 minutes and the gentleman was nice enough to walk out to the parking lot to find me and let me know. I parked in the back and they brought it out to my car. I changed the specs last minute and they accommodated that too. My buddy told me everyone here is helpful and nice and that's 100% the truth! Everyone here is so nice and polite it felt like I was at a resort. Companies like this will be around forever because of staff like this at Industrial Metal Supply.

We hired Joey to build a railing and hand rail for our remodel. We needed to replace old wooden…read morerailings that were removed as part of the remodel. Great experience all around. He came to us with samples of all his railings. Being able to see the finished product helped us decide what style we wanted. We ended up changing our mind after seeing the samples, so this was really helpful to us. Later on, he came out to measure multiple times--before and after the floors were down--to make sure everything was perfect. He matched the wood to our floor in to help create a seamless look. He was super careful when he installed them not to damage any of the new construction. Everything came out perfectly. The glass railings look beautiful and well worth the investment. I would highly recommend Joey.

Beautiful stair rails of metal, wood and glass. Joey and his crew are passionate about their work…read moreand did all of the installation themselves which took 3 days -metal, wood and glass. They kept our house clean by protecting the floors with cloths and covered the wall with paper. Overall a great job and we are very happy with our rails.

Robeck's has earned the high ratings they get. We had a hospital bed widened about 8 years ago,…read moreand the workmanship is of the highest quality. They know what needs to be done, and they take pride in their workmanship. I recently asked for their help to order new casters for the bed, and Sam guided me through my options (at no charge) so that I would order the appropriate replacements. When the casters arrived, they sent their guy Jimmy to our house to replace the casters on the bed. These guys are extraordinarily generous with their time and expertise. All of the people I have encountered at Robeck's are respectful, ethical, and kind. I can't imagine getting better service anywhere.

I needed a steel shelf built for my work truck, this place had great reviews and they did not…read moredisappoint. Their friendly staff was more than willing to help, came out to my van took measurements for me and made a drawing of what we needed and were more than willing to get it done quickly and skillfully. The shelf was ready in about a day and I got a call that I could pick it up anytime. It was exactly what I needed and I couldn't have been happier. Then a few months later I needed something powder coated i gave them a call, they don't do powder coating but were still super friendly and hooked me up who they use, SRS Industrial Coatings in Santa Clara, and they are just as wonderful! Thanks for everything you are our go to for fabrication needs (I keep coming up with plans so I am sure you'll see us soon!)

Juan and his team were excellent. I came to them with rough drawings for a really small project for…read moremy kitchen (I needed them to create an exact copy of an existing range hood cover with some custom tweaks and some custom gas range trim kit pieces) and they executed my ideas perfectly, pointing out problems with my designs and also willing to help revise and tweak the final product as well. (I had to make a stainless steel version and then swap to aluminium due to the weight) Throughout, Juan was straightforward and honest with me. Definitely would come to him and his team again for any metalwork I need done!

We hired Yes Welding to design and build a fully custom railing for our deck, and the result…read morehonestly exceeded our expectations. This wasn't just a railing, it feels like a piece of modern art. The lines are incredibly clean, the welds are flawless, and the whole structure feels rock solid and beautifully finished. You can tell right away that this is true craftsmanship, not off-the-shelf fabrication. The owner has a real artistic eye and helped us design something totally custom that fits the space perfectly. He paid attention to every little detail and treated the project like it was his own home. Super professional, communicative, and just a genuinely great guy to work with. Quality like this doesn't come cheap, but when you want something done right and built to last, it's 100% worth it. If you want master-level metal work, Yes Welding is the place to go. Highly recommend.

Brian took on the job of replacing a cracked lift off hinge needed for my aging sailboat. It was a…read moresmall job for JP but an important one for me as I was unable to source a replacement for the 35-year-old cast part and it was a critical piece used on the entryway teak doors. JP and Brian came through with a precise stainless replacement part. Cudos to their customer service and attention to detail. You'll not be disappointed when choosing them for exacting work.

These guys do amazing work. We outsource our fabricated…read moreparts to JP metal fabrication because of the quality, price, and quick turnaround.

I needed some fabrication done to my swimming pool filter equipment (now that it is finally feeling…read morelike summer). I found Mark here on Yelp and gave him a call. He said he could help. I took him the equipment, and he completed the job in the same day. He is very professional, does top rate work and has a fair rate. This was a small job but I know who to go to, especially if I have a bigger projects which are their specialty. My kids will be swimming soon-- thank you, Mark!

We had Mark fabricate a mailbox stand for our newly remodeled exterior. We had an idea and Mark…read morebrought it to life. I wish we had more jobs for him because he was delightful to work with.