Mobile Welders may be able to do abstract yard art but not precision, show quality automotive…read morewelding. Anyone who charges $200 to weld one drain plug bung onto a rear end should be able to without welding the drain bolt to the bung by filling the center hole with weld and missing half of the welding surface securing it to the casing. Then leaving me with about 2-3 hours of grinding that I still can't remove the drain plug and two sides with no welding material. I waited all day Saturday till nightfall. I had to let him use my welder equipment just 2-3 hour later. I would just declare it trash because of the workmanship. Only the best on Yelp. Hopefully others will learn from my big mistake and shop around.

I've been in the auto industry for 20 years. Never done much welding. Hired this guy Michael. I…read moredon't give any reviews but this guy deserves one. Where to start? Great energy, personable, very good communication and listens. He knew how to do the job and it was more than a fair price. He even came out extra days because of the rain but that didn't stop him. And no extra charge. Couldn't freaking believe it. This guy is a machine. The job was damn perfect. I mean PERFECT. And I don't ever get perfect. But I did this time. You'd be a fool not to hire this guy. For the price the positivity and most of all the attention to detail and a job done perfect. Can't beat it. I hope I never have to hire him again but if I ever need a welding job, this is the first and only one on my list. Above and beyond. Just epic. Thank you so much! You're a lifesaver MICHAEL. Good luck and God bless.

I am extremely pleased with the outcome of a automotive project that I presented them with. Their…read morework is excellent and they deliver when they say they will. Thank you for a great job!

Working with Cory was really easy and he went above and beyond to make sure I had my project done…read moreon time. I asked him to polish my chair for an architecture project on a Wednesday and he had it done by Monday. He was super professional and even picked up the project free of charge. I couldn't recommend Cory enough for all your metal polishing needs. He was consistent, courteous and did a great job.

They always have my bikes running perfectly everyone in the shop skis super helpful! Tires oil…read morechanges big motor work they do it all! They even painted a helmet for me! A plus place!

Brought my bike in to see about a 20K service and fork service. Rob, the owner, gave me a tour of…read morehis facility, which was pretty impressive. After inspecting my bike, the technician caught a few things needing to be addressed and Rob and his team took care to do things right. He is super busy (says a lot about his shop), but spends the time to answer questions and schedule you in. I'll be back. Recommended!

RSW Sets the Standard for European Auto Repair…read more I can't say enough great things about RSW! They did an outstanding job repairing my BMW -- truly first-class service from start to finish. The entire team is attentive, professional, and quick to respond. Derek kept me updated every step of the way with clear, thorough communication and accurate estimates (no surprises, which I really appreciated). Their guest lounge is also the nicest I've ever experienced at any auto repair shop -- spotless, comfortable, and thoughtfully designed. RSW sets the bar high for quality, integrity, and customer care. Highly recommend them to any European car owner!

Horrible, awful experience with RSW! This is a long review, but I wanted to provide enough details…read moreto show how bad of a business this is. I went in for an AC fix (no cold air). I told them upfront that I had already recharged the refrigerant. They charged me $400 to diagnose the AC issue by vacuuming and recharging the refrigerant, despite me telling them I had already done so. Their "master technician" said that the AC compressor had melted on the inside, and that I needed the compressor, condenser, and evaporator all replaced for almost $5000. They said they also found a coolant leak, and replaced the coolant expansion tank for the high-temperature circuit. After replacing that expansion tank, they say they ran a pressure test, which showed a new leak that is, and I quote, "gushing coolant". They wanted to charge $1600 now to replace the radiator. I tell them not to do any more work (they had only recharged the AC system and replaced the coolant expansion tank at this point), and that I would be taking the car home as-is. I was warned that I "wouldn't be able to make it down the road without overheating and potentially destroying my engine". They made me sign an "unsafe vehicle" waiver. I turned the car on, saw no leak, and drove home just fine. The temperature did not deviate from normal. At home, I saw that not only was the high-temp expansion tank full of coolant, but they overfilled it. I drained it to the appropriate level, ran the car for a bit, and again found no temperature issues. However, I noticed the low-temp expansion tank had no coolant in it. I filled it, then saw coolant leaking from the low-temp radiator and where the coolant hose meets the expansion tank. I took both expansion tanks out, and re-installed. This fixed the leak between the expansion tank and the connecting tube (obviously didn't fix the leak in the low-temp radiator). I replaced the low-temp radiator myself, which resulted in the low-temp coolant circuit now holding coolant properly. Tada, my AC works perfectly! Turns out that when the low-temp coolant circuit runs dry, the compressor won't turn on (to protect itself). To put the cherry on top, I did a pressure test on the high-temp expansion tank that they replaced (I made sure to get the replaced part back). It did not leak, meaning it never needed to be replaced at all. So to recap, I paid $1300 for them to replace a completely functional part, recharge a just-charged AC line, and not solve anything. Meanwhile, they tried to charge me an additional $6300+ to replace the compressor, condenser, evaporator, and high-temperature radiator, when in reality, NONE of those parts where faulty. All of the above is purely fact-based. The following is my analysis. It seems there are two possibilities: either they repeatedly failed to correctly diagnose and address the issues, opting instead to replace parts indiscriminately, or they deliberately attempted to exploit the situation for financial gain. Here are things that just don't add up: - How did they come to the conclusion that my compressor was broken, and destroyed the entirety of the AC system with it? (it hadn't) - Why did they replace parts in the high-temp coolant system, which had zero relation to the AC system and low-temp coolant circuit? - I believe when they replaced the high-temp expansion tank, they pulled on the low-temp expansion tank connecting tube, which created an additional leak (I fixed by just re-attaching). - Why did they believe there was an issue with the high-temp coolant circuit to begin with? Anybody with two eyes would be able to open the high-temp expansion tank cap, and see it was full and not decreasing. - If they replaced the high-temp expansion tank and then ran a pressure test, how did that result in a pressure-induced leak in the low-temp radiator? Those systems aren't connected. All I can say is that I would never, ever give RSW my business again. I attached a picture of the overfilled high-temp coolant tank, and the hole in the low-temp radiator.

I had a custom metal fabrication job and contacted Badger for assistance. The job required…read moreend-to-end design and fabrication work from the strict specifications that I had. Abe at Badger is extremely knowledgeable, has state of the art design tools, and helped through the entire process of design, fabrication, and QA. I am very satisfied with the end product and kudos to the entire Badger team Abe, Steve, Lisa, Kendra for doing a great job. I would highly recommend Badger for any metal fabrication work.

From the owner: At Badger Metal & Machine Fabrication, we combine precision machining with creative metal…read morefabrication — producing everything from high-tolerance parts to custom architectural elements and display builds. Whether you bring a finished drawing or just an idea, we work closely with you to bring it to life in metal. No red tape. No missed details. Just craftsmanship, collaboration, and results.

I had to take the time to review Mara Polishing & Plating Co…read more I had candlesticks and goblets from my grandmother and my mother. (I wish I took before pictures) I stopped in and met Mrs. Mara. She went through each piece and recommended the best options to bring them back to life. Mr. Mara came into the office from the back and also gave his input. They treated my family heirlooms with the same love and care as if they belonged to them. I was in no way hesitant to leave my belongings with them. They were in terrible condition. Tarnished and stained. They quoted very fair prices. I would have paid more. My husband picked them up. When he came home, he couldn't stop talking about how nice the Mara's were to deal with. Mr. Mara was telling him about all of the different services they provide. When we opened the finished products we were floored on the restoration. They were beautiful. They know their business. If you want great service, professionalism, and dealing with down to earth good people, please check Mara Polishing out. Here are just a few pictures of the finished products.

Refinished an old Gumball machine. Dropped off the parts I needed plated and polished and they…read morewere ready in about a week. They look fantastic a year on. The dog was nice too.