These guys are great to work with. If you have a business or are an amateur like me, they are…read morealways helpful and they know what they are doing. My wife and I have had several different jobs we needed help with they always had a solution, and their prices are always reasonable. There are very few businesses in Lake Havasu that are as friendly and helpful than these guys. We highly recommend them.

Reading the only review posted here made me laugh. The customer clearly has too much time on his…read morehands. For the amount of cuts he was expecting to be done, that was an incredible price as in low cost. Sounds like the shop tried their best to do it but were not able. Offering to pay the customer the $60 was as generous as anyone could hope for. I hope he found a capable shop and that they told him how much it would cost to have it done. Sounds like it would much more money.

Brian should not be in customer service. Paid almost $600 for a small generator box. gave them the…read moregen model # and exact dimentions. Box arrived and the top width was 10 3/4'' wide and the gen is 11 1/2'' wide. It will not fit. Brian blamed me, the customer, that has never built a box before for the box being to small. The problem is that they did not add an inch for the front latch and hinge because they stick out in the way of the opening. He blamed me for that? How was I supposed to know the latch and hinge would be sticking out? I gave the exact inches of the gen. Also he said I would be getting a heavy duty boat hatch lift spring so the box would stay opened, instead I received a 1/16'' cheap flexable cable. He said it was 50% my fault and to pay $100 for shipping again. The box has 4 bolts on the bottom and the only way to get the light 48lbs gen in and out is to remove the 4 bolt and nuts each time instead of opening the lid and putting my gen in the top. When I ordered it he was nice and said any problems call me and when the gen would not fit I called and he was rude and blaming me for not knowing his job. I wish I never heard of this company because of the way they treat their customers.

Brian and his Personnel were outstanding with my first "Tool Box/Fuel Tank" 2 years ago on my 2018…read moreGMC Sierra. I returned on 12/15/20 for my 2nd custom tank on my 2020 GMC, Long Bed Dually. Brian and his crew fabricated this tank to fit under my "American Truck Cover" tool box/bed cover combo. An absolute exact fit, giving me an additional 95 gallons of fuel. Gauge and switch were placed inside the center console of the vehicle, giving it a clean and professional look. These guys did an outstanding job, building and completing the install all in one day. This was well worth my trip from Phoenix.

I have a vintage Scotty trailer with an old style torsion axle. I noticed the wheel was rubbing…read moreagainst the wheel well, and the trailer was sitting lower than it should. A quick examination revealed one of the torsion springs was broken. I contacted Richard at Liberty Prop and Welding and he came and took some measurements, in the pouring rain I might add. He contacted Dexter, one of the only manufacturers that make replacements for this type of axle. There were some delays due to weather and the holidays, during which Richard kept in touch with progress reports. Richard was also very accommodating to our needs. Once the axle arrived, he had installed in a few days. The cost was as expected, no hidden costs or fees. The installation is perfect, the trailer is now at the correct height again, and it tows beautifully. Liberty Prop and Welding is a local family business, and I would highly recommend them.

Took a prop in for service on Tuesday and he had it done and ready by Friday morning so I could use…read moreit this weekend. Was very knowledgeable of the different props and sizes/pitches for my wakeboard/ski boat. Got another prop to clean up and will definitely bring it here again.

Rick and his crew are the best team in the off-road world. I highly recommend using this company…read morefor all your off-road and custom fabrication work.

John At TANK IT is the best In the business. My tanks fit perfect. The weld quality is second to…read morenone. Every detail is top notch. Turn around time at the busy part of summer was amazing. Less than 3 weeks for 2 large custom tanks. That included the design phase as well and all my initial calls asking questions. If I knew what I was doing it probably would of been 2 weeks!. We arrived after a 900 mile drive and his hospitality was old school. No one DOES THIS ANYMORE. If you need fuel tanks and or anything manufactured rest assured John will handle it with zero issues.

Super professional and ALWAYS on time which is rare for someone in this industry. Would totally…read morerecommend if you are looking for high quality work done right the first time.

Aaron did a stellar job he fixed our broken old gate in a great timely manner he also did it for…read morepayment via zelle . Great company and craftsman

From the owner: At Aaron’s Custom Metalworks, LLC we specialize in metal fabrication, welding, decorative paneling,…read moreand CNC plasma cutting. We take pride in delivering beautiful, high-quality metalwork to our clients. We believe that our work is not just a reflection of our skills, but also an expression of the unique personality of every customer. Our custom designs are tailored to meet your desired specifications, while our competitive prices make sure that you get the best value for your money. Our goal is to provide personalized customer service that leaves a lasting impression and ensures that you always come back to us for your metalwork needs.

Incredible expertise found here. This level of knowledge and craftsmanship is difficult to find at…read moreany price and so friendly to boot.

I took my 2014 XP 1000 here to do some upgrades. Craig really knows what he is doing. I figured…read morethat modifying the engine would come with some constant tuning and I was ok with that as long as I got some good HP. First, Craig installed an MCX turbo kit. Almost 2 years later I also had him do a good bit of engine mods. He ported and polished the heads. Increased the intake +3 and exhaust +1. Installed bigger valves, beehive valve springs, cam tensioner, new turbo web cams, Carrillo rods and pistons, ARP studs, new cylinder and a power commander tuner. It's been almost 2 years since I had the work done and not one single problem. It runs like at bat out of hell at 230hp. I'm running 14-15 psi boost on the turbo. The turbo is awesome. Very reliable. No problems with the turbo since 2014. I live in the San Gabriel Valley in Cali. I will always haul my toys to Havasu to get any work done. Craig is my Offroad mechanic. And his prices are way better than the companies in California.!!!

Raymond was very responsive and delivered quality work as promised ahead of schedule.read more

Raymond Diaz, from ALLDIAZ WELDING has been fixing our 4X4 POLARIS and he is very KNOWLEDGEABLE,…read morepersonable, reliable, does what he says, and we are EXTREMELY happy with his work and OUTCOME!

Franks Trailer Repair saved the day! My daughter and I were taking a long road trip out of Havasu…read moreand our trailer tires and brakes did not look safe. We stopped by on a Friday at 3:30pm while they were finishing up another customer, and after Anna heard our story of needing to leave Saturday morning, the Frank's team pulled our trailer in for an inspection. All of the bearings, breaks and tires were absolutely not road-worthy. The whole team stayed late and swapped out all of the items and got us back on the road within hours! We made the trip safely with zero issues and Anna reached out the following Monday to make sure we made it safe. Top Notch customer service and hospitality. I would recommend Franks to anyone for their trailer needs!

Frank is amazing! I drove in from CA to have my trailer basically redone. He replaced all my…read morelights, trailer re-bunk, tandem fenders, rotors, hoses and anything else he suggested needed replacing. No pressure, great quality of work and such an honest dude. Was in and out of there under 4 hours. Highly recommend!

I had a wonderful experience with Armor. Mike and Larry are outstanding to work with. Very…read moremeticulous, professional, and exceptionally helpful. From Scheduling with Amanda, to field estimate, and install. Communication and timeline was on point, very refreshing to see in the construction industry. Thanks for everything guys! Vince

This review is an account of our experience with the fabrication & installation of a standard 2…read morefoot high, 300 foot wrought iron fence on top of our stucco wall around our property with 3 gates. Estimator Jesse took measurements and said the length of time was out 8-12 weeks for installation and take 2 days to install. I called the project coordinator to verify timeline, with the acknowledgment that they would try to do sooner. Over the proceding months there was no communication from the company. Unfortunately, we never heard from Armor unless I contacted them to find out the status. Almost 3 months later, I called the project coordinator for the 3rd time and found out they were supposed to go out that week and he forgot to let us know. I took a few days off from work & drove from out of state to be there. No one showed up for 3 days. I called the coordinator & he seemed surprised that they didn't show up. He called me back with information and promised they would be there Thursday morning. No one showed up that day and I called once again. Steve ensured me that they got stuck on another site but would be there Friday to start and Monday to finish. This meant that I could not return to work after taking an entire week off. Monday transpired and they didn't finish. There were 4-6 guys on the job-site, headed by a supervisor who was mostly standing around talking and watching or he was on his phone. The entire group would work for an approximately 15-25 minutes, then take a 40 minute break. All would congregate together either on the golf course or out in the driveway. Then they would depart at 9:30 am for an hour+ lunch break. I'm not one to micro-manage, but I noticed the sincere lack of motivation to finish the job. The metal screws they drilled into my stucco were done so haphazardly at an angle with large gaps between stucco and wrought iron and also left behind large holes with large areas of stucco missing in the surrounding. I purchased stucco and was restuccoing the areas myself as they were working. The supervisor offered to have one of his team do this if I gave them the stucco. At the end of the next day they said they did not get the right parts powder-coated and the company forgot to fabricate the 3 fence-gates. So, they would need to come back in a week or two. I gave them a specific two day window to schedule the final installation when I could be there which was approximately 3-weeks from that day. I once again took off work & drove back on that date. The crew never showed up and coordinator never called me. I gave up. Three more weeks transpired, and I got a call that the fence parts and gates were ready. I set it up for the soonest available, and drove back over to Arizona. Two guys showed up, Dakota and another gentleman. Dakota was very polite and respectful. They spend a day trying to hang one 40 inch gate. First they installed it to high, then they took it down and did it the correct height and got started on a second driveway gate. They realized they didn't have the correct parts powder-coated yet again for the self closing doors. They also didn't have time to finish the other 2 gates so they came back the next day with another 4 guys, some were part of the initial job. They all sat around and watched as one was drilling holes. They were loud, laughing shouting and overall just not a professional group. Although I was grateful that the job was finished, I wouldn't recommend using this company unless you have 4-6 months to wait.