They have done excellent job fixing the damaged anchor attachment of my iron fence. Their…read morecommunication was very responsive and thorough. Highly recommended.

After having about 11 people come by to provide bids I started looking for company to help rebuild…read morea fence that can do both wood and metal because I wanted a half metal half wood fence. I decided to go with them because their bid was the lowest but looking back there were a lot of red flags from the beginning of the communication process with this company that I should have considered. For example the owner sent me a side message saying if he were to respond to my message it would cost him $70; and just based on what I dealt with they do not seem to be a established business based on communication, the amount of nickeling and diming done and the final product. For the whole fence, I provided him with a picture of what I wanted specifically for the gates and some images circled and let him know I wanted it to be as long and continuous as possible with only metal cut offs where they needed to be and any extra support can go in the back. He also provided me a picture that had a lot of metal around the edges and I didn't not like that and stated it was too much metal and again provided him with my photo. This was the only conversation we had about the gate and when it was constructed it looked like the photo he sent vs what I sent. And instead of acknowledging his error he was rude and combative and his brother had to step it. That was the begging of a whole lot of other issues especially them nickeling and diming me for all of their errors that were a result of terrible communication from him. They charged me a flat fee to build the fence "professionally" and it looks a mess, there is nothing professional about it and also tried to hit me with fees for stuff that was included already in the price to rebuild so that is why I know they are a new business. The slide gate is not sturdy and they had to cut a whole in my other wood to make it functional, that I did not know about. They also installed the sensor wires on the outside which could easily be cut even though I expressed safety concerns throughout the whole process. When they were installing the sensors I was outside because they were 2 hours late and it was getting dark so I had my car headlights on and he never asked me anything about it and when I spoke to him about the placement he said it would delay the project and he needed to do what was best for him. After the wood sat in the sun for like 3 days the slide gate stopped closing because the sensors shifted and sounded an alarm with an error code of 71 every time you tried to close it. The only way to close it was to hold and after contacting him he blamed it on me after not responding for 2 days (see attached convo). I had lift master come out to fix it and it turns out they were a lot of issues like not installing all of the wires correctly etc. one of his friends did the install so I am not sure they were fully authorized to do it. The walk-in gate looks awful it was not measured correctly and it is not fully functional. He also agreed that the gate/fence does not look right which is also my fault according to him because I purchased my own wood (see attached convo). He also told me that it was "hard to install gates" and that he would have had to do extra stuff to make it even which was like what do you mean that's what you were getting paid for! For every complaint I had his response was, it's going to cost you to fix it. They just left me with whatever and now I have to deal with it. Now that the wood has been rained on and has settled the walk-in gate no longer stays closed at all and randomly opens. I provided them with the lock well beforehand and it's not operational. They screwed the key frame into the slots that the other wood is screwed into so the nails do not stay in place and a part of it has cracked off due to the gate slamming when it opens by itself. The metal part that is supposed to latch does not fit so it just does not stay closed. They also did not add support beams to the back of the fence so the fence bubbles out and caves in and is wobbly in certain places, especially places where the metal posts are because there are no screws there. Overall the did an awful job and they left me with a mess that killed my grass and and did not not finish painting. There are sooo many other things that I can highlight but this review is long enough and I can only add 10 pictures! 10/10 do not recommend!

I could not be more pleased with the work Jorge and his team did on installing the driveway and…read morefootpath gates as well as a new gate opener. The quality of materials they used is outstanding. Everything looks clean and sharp! Most importantly, It looks like this all appeared miraculously overnight. My neighbors are impressed as well! The workmanship, professionalism and attention to detail is outstanding! The price was very reasonable. I will definitely recommend Sanchez Access to anyone and everyone!

Installed an electric swing gate at our home. Affordable, easy to work with, and did a great job on…read morethe installation! Highly recommend Sanchez Access for your gate/fence needs.

These guys are great to work with! Jorge was the most responsive of the welders who we invited to…read morebid on our project - to custom make a steel raised bed for the back yard of our newly-built house. He came up with multiple ideas of what aesthetics would look good for our project, and came up with a great design that matched the look of our newly-built house. Throughout the process he was communicative and I always knew when the end product would be delivered. The bed looks GREAT! And the project was finished when Jorge said it would be and for a reasonable price. I would strongly recommend Jorge to anyone looking to improve their home with custom-designed metal!

I need a rusted out stair to be replaced. Jorge did the work without any issues, stair looks great…read moreand the quality is very good. Jorge is very professional and I would definitely use him again for all my welding needs

Good company and solid work for a good price...only thing is that they can be back logged but if…read moreyou have the time they have excellent work in return.

Looks like a small shop..family owned. I needed my truck welded after my hitch broke through the…read moreframe. I was getting estimate from $600 to $1200 I did not see the reason for the high prices. Someone told me about Ober. "They are a good honest company" So I went over to their place. The guy looked under my truck gave me an estimate of $150 to $200 based on their hourly rate "a few hours". I came back to pick up my truck and was charge less than 2hrs. and some material they used...I checked out what they did..WOW!!!! Everything was 5 stars about Ober and Sons Welding. Check them out about any welding fabrication.

Had preexisting window bars converted to bars that matched and had safety release mechanisms for…read morefire escape so I could get approved for homeowners insurance and so I could refinance They did a great job for a reasonable price and were easy to communicate with They listened to my ideas and worked with what I have WITHOUT trying to upsell me for all new window bars Thanks Ron ! Yall were great

I HIGHLY RECOMMEND ATLAS!! We needed a trailer hitch welded onto the back of our RV. Ron and Zach…read morewere awesome to work with! They were very accommodating to our schedule to make sure we were taken care of. Super nice to work with and Zach explained everything he was doing. Excellent quality job, we will ALWAYS go to Atlas for any welding job we need done in the future. Thanks again guys!

Jonah showed up to my house within 20 minutes of talking to him and he did a great job welding this…read morebracket back onto my pop up camper trailer. Highly recommend!!

Jonah did a great job fabricating a gate in our back fence. He answered questions quickly, showed…read moreup when he said he would and cleaned up his work area. You'd never know the gate wasn't part of the original fence. Quality work and competitive price. Thanks Jonah. We're very happy with our gate.

Great service on a small welding job on my Jeep. Done fast, looks good, fair price. I will use them…read moreagain.

Had a little trouble with my trailer hitch today and these wonderful people helped me! Thank you!…read morePlease use them when you can!

Great experience with JS Welding and Fabrication. Communication was easy, they showed up on time,…read moreand the work came out perfect. I had them fix my gate so my dogs couldn't slip through the gaps, and they nailed it. Super clean work and exactly what I needed. Highly recommend.

High quality work, good pricing, professional service, and took care of me in a pinch. Highly…read morerecommend using JS Welding for any of your welding needs.