We hired Joey to build a railing and hand rail for our remodel. We needed to replace old wooden…read morerailings that were removed as part of the remodel. Great experience all around. He came to us with samples of all his railings. Being able to see the finished product helped us decide what style we wanted. We ended up changing our mind after seeing the samples, so this was really helpful to us. Later on, he came out to measure multiple times--before and after the floors were down--to make sure everything was perfect. He matched the wood to our floor in to help create a seamless look. He was super careful when he installed them not to damage any of the new construction. Everything came out perfectly. The glass railings look beautiful and well worth the investment. I would highly recommend Joey.

Beautiful stair rails of metal, wood and glass. Joey and his crew are passionate about their work…read moreand did all of the installation themselves which took 3 days -metal, wood and glass. They kept our house clean by protecting the floors with cloths and covered the wall with paper. Overall a great job and we are very happy with our rails.

I had a special cutting job. Mr and Mrs. Van Nuys were very nice and friendly and did a great job…read more Miguel worked with me and my schedule. The price was very reasonable and I thank them for a good job.

We worked with Micah and his folks to design and fabricate four very large COR-TEN steel raised bed…read moreplanters. We loved working with Alloy. They were always easily reachable, quick to respond and helpful in the design and delivery. They helped us make design decisions that worked out very well and helped us figure out how to transport the planters which at their size was a deal itself. Their prices were great (many others we talked too were way higher) and they helped us determine the materials that would make the planters durable. We've already referred them for some other work and would not hesitate to recommend them to others!

With the absolute sludge that has been forced upon us by corporate mergers and acquisitions plus…read moreprivate equity absolutely flattening every single experience across the board via "per my last email put a pin in it circle back to upward mobility" corp speak aristocracy it is SO unbelievably refreshing to walk into Borrmann's Steel and experience a place with real, genuine character and history as well as an hilarious crew of old heads who obviously know how to work hard, but can also have a good time. I instantly connected with all of the staff. I am new to welding, but long time in various different trades ( mechanic, short stint as an electrician, lots of on the side hobby stuff too ) and went to Borrmann's in search of a steel plate cut off to build my first welding table. I decided to go full bore with a buy once cry once mentality, but I also had to be realistic with my current budget. I found a 30x48x1/2" steel plate cut off that was perfect. They cut me a fantastic deal, loaded it up, and I was on my way. I got the plate home and placed it on my temu pot metal fixture table which inspired me to build this new table in the first place as it bends and flexes like crazy. I set it up, super stoked, so happy, but then realized it had quite a bend in it. Turns out it was cut using a press brake and it put a pretty significant bend in it. What a bummer! I called Borrmann saying, "I don't know if you remember me, but I swung by this weekend grabbin a 30x48x1/2" plate and its a bit bent." The guy on the phone said, "How could we POSSIBLY for get you! Swing on by with the piece and we will check it out." I was having a bad day and I laughed SO hard and really needed that. You just don't get this kinda customer service anymore. I really appreciated it. Admittedly, I was slightly annoyed I had to reload it ( 210lbs of steel + a few knocks on neighbors doors ), but the office staff and I were belly laughing the first time we interacted. It literally felt like a bunch of friends hanging out just swappin' stories of being young and dumb and I decided, "Sure. Lets see what happens" and loaded the plate and headed over. I show up with the plate, get in the office and they immediately begin smiling and welcoming me back. They tell me to have one of the staff look at it and if its bent to "burn me a new piece." I am new to all this so I had no idea what that meant. The staff member looked at it and confirmed it was the press brake that likely caused the issue. The staff then proceeded to grab a BRAND NEW STEEL PLATE and cut it with Oxy-Ace ( "burn it" ) loaded it up and sent me on my way. I am sure this is not common practice and probably not something they do often, but a gesture of kindness due to my enthusiastic newbie excitement I was beaming and the "back in my day" rapport we shared. This is the kind of thing that makes me as a customer decide to chew a few dollars on materials even if the local corporate metal supplier is cheaper. They had every right to say, "it is a cut off and this is what ya get. All sales final. Sorry." but instead they made things right for me. I forgot what integrity was like. Sad to see the for sale sign on the building, but this is unfortunately the way of the world with my aforementioned distain for corporate America flatlining the character of long time family owned businesses across all industries. As long as Borrmann's retains the same hand shake integrity that I experienced yesterday, they have a customer for life.

A wide variety of materials for all of my fabrication needs. They have great ornate pieces for…read morefencing and railings, as well as some unique metals for those purposes as well! Try them, you'll be back for more.

We have had multiple pieces of outdoor furniture powder coated by this company and all were…read moreexcellent! Highly recommend!

From my first interaction over the phone with Ben I felt confident and comfortable he would be able…read moreto get my wheels powdered coated, Ben is a super nice guy very informative and extremely easy to work with no hassle just straight forward genuine and true to his word it was $650 to powder coat my wheels he partners up with 5star auto in San Carlos to remove the tiers and mount the tiers back on in order for him to powder coat them turn around time was as promised and I had my car the next day by the end of the day, my only gripe was with 5 star auto which is no fault of Ben or his services but the guys left my steering wheel dirty and greasy which I also noticed on my paint I was able to get it all off but they should be more cautious of it aside from that my tire sensor is on. But again this is no fault of Ben, Ben did an amazing job on my wheels I even had some curb rash damage and it seems like he went above and beyond to correct it because I can't feel the damage anymore on the wheel not sure if he uses some sort of filler before coating but man the wheels look AMAZING!!! Thank you so much Ben I appreciate your work!! Definitely worth every penny I'll be recommending him to my friends and family!!

Had them cut into gate and place a sturdier USPS Key Keeper. Great job done on time and at a very…read morereasonable price. Highly recommend them.

Very professional, the quality of the work was excellent, and his communication was clear. I would…read morework with him again.

Neo is a highly skilled welder. Reasonable prices on commercial work. He is my go to guy for…read morewelding.

Neo did an industrial welding and metal fabrication job for me in Redwood City. His price was very…read morereasonable. He did a great job and even did some extra work for free that was not in his bid. Nice guy too. I'm not a pro welder but I do know how to stick weld. I am a good judge of welding quality. Neo takes pride in his work and it shows. I recommend him highly. He can do regular arc welding and also inert gas welding. He has a truck and can do all the work at your site. I saw photos of some gates, racks and trailers that he designed and built. Very nice. You won't find a better welding value anywhere. I am a very satisfied customer.

I requested a quote for a crawl space cover. Lee called me while on vacation to check on the…read moredetails. Even came over to confirm measurements and walk through the details. Cover was done in 3 days.

These guys were truly amazing. The quote came in well below everyone else, and they were able to…read morefabricate a great looking gate and install in about a week. Exceeded my expectations.

Eddie at ECA Iron Works is a 20 out of 10. He replaced two 30 foot wood pergolas that were rotting…read morebadly after 20 years. Eddie's pergolas will probably last forever. They are power coated green and have the exact measurements and detail as the previous wood ones. See picture. You cann't tell they are metal. His pricing is great. We are so glad we used Eddie and steel and will use him for any future iron projects.

Eddy is one of the most personable and talented craftsmen I have ever done business with! He most…read moredefinitely exceeded my expectations at every turn. His response time was fast, his communication at every step was awesome, his product is superior and the cost was perfectly fair. I have already recommended him to two people and I hope this review will help others to look no further than E.C.A. Ironworks.

I own a Appliance installation business and I had a small project for a customer of mine with…read morebarbecue doors to be shortened. Nobody would take on the project because it's such a small job. However, I found B&B and they were incredible with customer service. They did a fantastic job. The doors look just like factory. Super impressed with their business operations. I would definitely recommend this company to anybody looking to do a project small or big.

Great welding shop. I've used them occasionally for 5 years, and the job was always done neatly and…read moreclean. I bring them weird stuff to fix, and they do it!

We had Mark fabricate a mailbox stand for our newly remodeled exterior. We had an idea and Mark…read morebrought it to life. I wish we had more jobs for him because he was delightful to work with.

In installing my Range Hood we realized the chimney was too long for our 8ft ceilings…read more Understanding it was a very small job to just cut the existing stainless steel chimney cover many of the companies I reached out to were very expensive or would not even consider the project. Mark responded quickly and arranged to get it done immediately ensuring that the other contractors for my project could keep on schedule. Not only did he get this job done with beautiful results, he also gave me great advice for other projects I'll need to do to complete my home remodel!