really terrible work and company to work with. I took a few motorcycle parts here for a custom bike that I'm building. I had to have them do several parts 4 times before it was even usable. They used duct tape to "plug" the fork openings in the motorcycle tripple clamp. It just made a huge sticky mess for me to clean up but the tape had covered sections that should be exposed. Now that I'm installing the parts i've had multiple locations where in just regular assembly (no hammers or force) the finish is flaking off. I can then just keep picking it with my fingernail. I also found that they had dropped my swingarm at somepoint before they powedercoated becuase the hole that my bearing needs to go in was clearly smashed in. Good luck to me getting a swingarm bearing back in a hole that isn't round anomore. There were also several times they told me my parts were ready and to come get them only for me to show up and the shop was closed with no one there. I did get a response when I texted but only to say they had left to go to another job, even when I had confirmed with them what time I would be there. Really bummed that I paid almost $400 for what ended up to be nothing but a hassle and a waste of time. read more

Poor communication and poor work quality. First off they have horrible communication. They hardly ever answer their phone, do not let you know when work is completed and don't communicate with each other what has been done and they don't meet the deadlines they set. I asked them to powder coat motorcycle levers and the work wasn't done right the first time, they forgot to sand down the ends as asked. The prep work was very poor. This was evident with all the uneven surfaces on the powder coat. Once they took them back to correct that, they again missed their deadline they set. They left the levers on the floor because one lever was scratched upon pick up. The employee seemed irritated this was brought up to them and he took the lever, sandblasted it and quickly put it in the oven for 10min where the powder coat didn't seem to cure. I would avoid this place as much as possible. They do not do quality work here. read more

They do amazing work. Thank you so much. I have my patio chairs and table powered coated and looks better the new. Highly recommend this place read more

Severed metal and the owner of Jake are great! Always answers his phone and really took the time to go over the questions I had about Powder Coating bicycle parts and some fabrication questions. It's that kind of customer service that makes me want to drive an hour away just for him to work on my personal items. I live in Hayward and there's plenty of Powder Coating and fabrication shops , In my area. However, I've visited this place since it's near my girlfriends house and we wanted to paint some of her BMX bike parts locally. Everything came out great and now he is my go to person for car parts and bike parts finishing. Very fair and honest pricing and overall just a super nice guy read more

Severed Metal - Another example of his great Powder Coating skills. - Powder Coating Near Me - Oakley, California

The guys are awesome. Very helpful and they do great work. U need something powder coated u got to go see them read more

Severed Metal - Freshly done - Powder Coating Near Me - Oakley, California

See all

these 2 idiots that run this powder coating shop are liars and deceivers!!! I strongly recommend not to take your business to them, they are incompetent and unacceptable! their customer is something to be desired, could not even call with a courtesy call to tell me a customer that my parts were not ready after driving over 50 miles to pick them up, (do not) take your business to these 2 idiots!!! read more

Great place for powder coating. The guy who I worked with here is a great guy very nice. He explained the whole process of how they sand blast everything before powder coating which is good. The pricing is very fair and the quality of work is 5 out of 5 stars. Nice to support local businesses here in Oakley go check these guys out. read more

See all

Excellent Service! Highly recommended. Blasted a spare rim & powder coated. I would definitely do business with them again.... read more

Came across Jake and his business through a mutual friend. I had a boat trailer axle that needed a new spindle installed by means of cut and welding. Jake did a great job, fit me in the next day and had the job done quick! Welds looked super professional and overall experience was 10/10 Thank you Severed Metal, Highly recommended! read more

Great Work, Excellent Finish. Bruce installed a interior high end/decorative metal hand rail as a rush job (rush was my fault). He fit our work into his schedule. The work is perfect. I echo the other reviews that Bruce is a craftsman in his trade and executed with perfect accuracy. I could not be happier and would highly recommend Severed Metal. read more

Bruce is a great guy and does outstanding work for a reasonable price. He powder coated my belt buckle and it looked better than it was brand new. Best of all, he did the job for me the same day. I'll be definitely coming back in the future. Appreciate your business! read more

Severed Metal - Belt buckle - Powder Coating Near Me - Oakley, California

Couldn't be happier with the job they did. Had our outdoor furniture repowder coated and it came out great.

Brought in an old beat up police call box I came across with about 50 coats of paint and some frozen screws I thought would never come apart. Bruce freed the rusted screws and offered to bead blast it and powder coat it for a great price of around $300. We briefly discussed the color and Bruce said he would come up with something nice. He nailed the exact color I wanted. I couldn't be happier. read more

Severed Metal - Inside with original parts. - Powder Coating Near Me - Oakley, California

See all

I've relied on Severed Metal for several metal work jobs I just don't have the tools or expertise for. Bruce is a skilled craftsman in his trade and you get an absolute no BS experience with Severed Metal. He will tell you right away how long something will take and how hard it will be with almost perfect accuracy. read more

Awesome company. Unfortunately it's getting harder to find companies that follow through and get the job done on time and as described. The stairs leading to my office were looking worn so I asked Severed Metal to strip then and refinish in A black wrinkle finish. They turned out awesome and we're done ahead of the date they committed to. Would highly recommend! read more

FANTASTIC experience! Went to get an estimate for a broken drivers door that if not fixable would require me to junk the car due to the probable cost of repair. They looked at the problem and to my complete shock and surprise, I left 30 minutes later with the door FIXED - at a extremely limited charge. I could not thank them enough for saving me the extensive time and money that would have been spent having to replace the car. If you need any metal work completed, I HIGHLY RECOMMEND you stop by at talk with the friendly, professional staff. You won't be disappointed! read more

Created new door sill plates for my '51 Woody Wagon, fantastic job!! A pleasure doing business!

I got VERY lucky on my birthday, and my girl surprised me with a very great, three denominational life size, version of our company logo. All she did was hand this guy my business card and he created for us, with raw steel and talent, what we think is a masterpiece! It is so great that everyone who has seen even a picture of it is IMPRESSED! It is so breath-taking and well made every time I look at it I have to look 2 times. A clear example of artist and metal experience put together, he even powder coated each part it's respective color and the final piece looks GREAT. Finished on time as he said he would AND my girl said that he only charged the exact price that he estimated! VERY WELL done, thank you so much I will be waiting eagerly to hear all of the details about our next project ASAP!! read more

We had 3 custom security cages built & powder-coated an awesome blue. Bruce was professional, reliable & a pleasure to work with. He does what he says he's going to do & he does it on the schedule he promises (and our schedule was really tight!) He went above and beyond to make sure everything we needed was perfect. We've worked with 2 other companies in the past & had issues with both--now that we've found Bruce, we won't be using anyone else. Save yourself the hassle & worry; Bruce is the go-to guy. read more

Dropped off a sand blast and powder coat project and it came back in half the time Bruce committed to. Price was right on target and the finish was excellent! All my projects and referrals will go here. read more

I had a metal chair leg fastener from a bar stool break off. Drop in without an appointment and my item was repaired as I waited, about 10 minutes. He (I believe it was Bruce) even added some touch up paint once the item was welded back together. I could not be happier!! Will definitely be returning soon. read more