We had our furnace install and all ductwork done last fall and everything was great! Travis and…read moreChris are so easy to work with and great communication. Very pleased with the quality of work as well as the cost. Saved $$ over other estimates. Highly recommend this down to earth company!

Outstanding service...Don't waste time calling anyone else...Fire & Ice should be the first and…read moreonly call you make! Travis Rocks!

I should have done this review a couple of years ago. I'm finally getting ready to fix this…read moredisaster / unprofessional/major code violation/rip-off disaster. We had $1,500 to $1,800 quotes just to move the furnace over where it should have been and clean up the installation so I'll have to do it myself. We made the mistake of using this guy that Locke Supply recommended. The job was simple, install a new furnace in the closet below where the old furnace was so it wouldn't be installed in our hot attic. They had one job, they did it half-assed and failed. This job has lazy written all over it and the sad thing is that Dennis was there to oversee it and actually put his stamp of approval on it. At the time, we were just happy to have our AC running again but in hindsight, we should have made them fix it then and there. I guess at the time we were so flabbergasted at what we saw that we didn't want them in our house again. They were there way too long and thus was the result? Instead of putting the furnace all the way to the left side and leave us the ability to utilize the right side of the closet, they stuck it in such a way that we have about 2 feet of wasted space to one side. I can guarantee you if he did this in his own house, he would have done it correctly. The other thing I've noticed is the way they left the wiring with twist caps exposed and just hanging. The area around the top of the furnace was left open and he said that any drywaller should have no problem finishing that off. If the install wasn't half-ass, that may be true but there is no way to correctly finish this off. It would be a fire hazard. The other thing that really pisses me off is that they literally hacked into the nice plywood base I made for the intake. I guess that doesn't matter since I have to move the whole furnace over and I'll have to make a whole new sheet for a base anyways. Hopefully the pictures will show what a crappy, careless, unprofessional hack job this is. They even left the old dead furnace in place for me to disassemble and remove. By the way, it couldn't have taken but 10 minutes longer at the most to have done this correctly.

Absolutely awesome service. Chuck came out the same day that our AC stopped working. He quickly…read moresolved the problem and got the AC to cool the house better than ever. On top of that, the cost was well below what i expected. I was very happy with the service and will only use Cameron Air from now on!

The technician was friendly and knowledgeable. I was satisfied with the finished outcome. However,…read moreI was charged $150.00 for a service call and $150.00 for labor. The service call was a weekday in the morning, not a weekend or holiday and the job took about 15 minutes to change a 25.00 capacitor. This equates to approximately $600.00 per hour for labor, I thought it was a bit much. Probably would not use this company again for this reason. They also told me they had other jobs in the area, so if they charged everybody else a $150.00 service call, they made quite a killing that day.

From the owner: Our company has over 20 years experience and serving the Barron County since 2019. Our come thrives…read moreon customer service, quality service and installation. Our company is a NATE certified company with many more certifications.

We had Dirks install a new thermostat on January 15th of 2024. We told the technician that we…read morewanted a 5-day/2-day programmable one and he offered two option: one for about $250 and another (wifi-capable) for $800 and assured us that they were both what we wanted. Not caring if I could check my house's temperature from my phone or not, I opted for the less expensive option (I later found out I could have bought the exact same thermostat at a local hardware store for about $40). After the technician installed it and gave us a basic rundown, I paid him the $450 or so (another $180 for the service call in addition to the price of the themostat, plus tax) and he was on his way. The next day, when I went to program the thermostat I discovered that it had to be programmed one day at a time, instead of the Monday-Friday and Saturday-Sunday I'd requsted (and been promised). I was not at all happy, but it was already installed so I sucked it up and decided to live with it. Fast-forward to May 13th. We wanted to use our central air conditioner for the first time of the season but it wouldn't work so, not being particularly pleased with our service we had received from Dirk's, we contacted Barron Plumbing and Heating to look at it, and we're lucky we did. Being that all his technicians were out on other calls, the owner of the business (Tony Allen) came to our house to look at it himself. He was able to bypass the thermostat and get the air conditioner working so he looked at the thermostat. It had been wired wrong when installed, so that it would work properly in "heat" mode but not in "cool" mode. Since it was almost quiting time, he said he'd send someone the next day to fix it if we didn't mind waiting or, if we didn't want to wait until then, he'd get it taken care of later that day and we told him to just send someone the next day and I also asked if it was okay for me to buy a new thermostat and have his technician install it; he said that would be no problem. So, that evening, I bought a thermostat that had the one feature we actually wanted and it was intalled the next day, by BP&H and worked fine. Total bill from BP&H for 2 service calls and installation: $120. So anyway, we called Dirks and talked to Don Dirks about what happened and he asked us what we thought should be done about it. We told him that he could buy back the thermostat that was sold to us under false pretenses, telling him he could still sell it as gently-used for $100 and still make a more than 200% profit on it. He refused, and the best he would offer was to pay our bill for BP&H to fix his company's mistake. Knowing we wouldn't get any other sort of compensation from him, we agreed to that amd emailed him a copy of the bill to the email address he provided. I told Tony from BP&H that Dirks would be sending him a check and he said that was fine. About a month later I contacted Tony again and asked if Dirks had paid the bill and he said no, so I paid it myself. So, to summarize, because we went with Dirks, we paid about $600 to have a $40 thermostat installed (we still have the one Dirks sold us, on a workbench in my basement), when we could have gotten ahold of BP&H first and paid less than a third of that. Also, what kind of a technician doesn't know how to properly wire a thermostat? It seems to me that should be a VERY simple procedure for someone who does that kind of thing for a living. It kind of makes me wonder if it was perhaps wired wrong intentionally to drum up some more business for the company...

Had them install whole home combination propane boiler back in 2020 for over $10K. Was ok but was…read morenot noticing a reduction in propane use through two winters. Had them come back out when I realized one of my in-floor water loops was circulating when thermostat was off. Tech was out and identified the entire system they put together for me nearly two years prior was all wrong and was causing that loop to circulate hot water. Correction was made and I was not charged. Since all of this I have recommended their service to my family etc... This last weekend I installed a new range in my kitchen and had to add a line to my propane 'manifold'. All went well until I did a leak detection on the high pressure side of my propane supply. Turns out I have had a propane leak in my basement for possibly up to 3 years! Since this was on the high pressure side and would have to turn off my main supply I called Dirks to come take a look and deal with it. Told me up front the service call would be $140. Ok, they came out and diagnosed exactly where I told them a leak was and confirmed it would have been them that made that connection. The flare fitting was misaligned and apparently never checked for a leak. Service tech shut off supply re-aligned fitting and sealed it up properly. Still got a $300 bill from their mistake. And of course now they require payment on the spot because I am sure they have had to deal w/ other quality issues. They are not a horrible business but with all the issues and headaches I have had to deal with because of them I am done and will not pay them a dime more for anything.

Nothing they did actually fixed the problems. They replaced metal drain pipes with ugly pvc pipe…read moreeven though they were exposed under a bathroom sink. The pvc pipes were cracked as soon as they were bumped. I called twice to have someone fix their mistakes and was told someone would call me back, but no one has. AND they were horribly expensive.

Called on a Thursday about a hot water pipe that sprang a leak…read more Other places told me next Wednesday was the fastest they could get here but Bartingale had a guy (Kyle) in the area. He was here in 10 minutes. No pressure to upgrade or replace anything, very helpful and knowledgeable , fast & friendly. I would defiantly recommend them