Yeah, I would recommend this place for all of your welding and metal fabrication needs. I paid more…read morethan I expected but I'll chalk that up to an experienced business man who has expenses and knows his worth. Would definitely return if the need presented itself.

After searching high and low, I finally found a metal shop that can deliver to my exacting…read morespecifications. Not only are they proficient at their craft, they are also metal artists, both literally and figuratively. That alone elevates the quality of their work above their competition. Their pricing is more than reasonable as well, which for most people is important. They certainly have my business ongoing.

I went to Carvers Sheet Metal in an attempt to find a local company who could make some radiator…read moreseam covers that would closely match some missing ones on an early 1960s house I was fixing up. No other local fabricator or sheet metal company would touch the project; it just was too "out of the box" for their mentality to handle. Reed at Carver saw it as a challenge and took on my small job. Within about a week, I had some parts that work well and which saved me a bunch of money over having to replace the whole cover system. It's good to find a company that doesn't run away from a challenge.

Great people Great service…read more I drive 200 miles to use them because they are good at what they do and always take care of me. They always get it right.

Highly recommend Oxley & Son for your welding kfabricating needs. They can take your vision and…read moremake it a reality. I agree, giving them 5 stars is not enough. Their work is incredible, along with their attention to detail and professionalism. They go above and beyond to make sure we are always happy and pricing is extremely reasonable as is turn around time. A big thanks to Jackson, Taylor & Steve.

I found Amann through a Google search while looking for help with my Tin Lizzy longarm machine, and…read moreI only wish I had found him sooner! My machine had been experiencing some serious issues. After two in-home service visits from two different technicians and spending four and a half months with a repair shop in Michigan, the problem still wasn't resolved. Amann was the one who quickly identified the real issue with the machine. His diagnosis was prompt, his pricing was very fair, and he took the time to patiently explain what needed to be done. He also gave me thoughtful options to either repair or replace the machine, without any pressure. To top it off, he went above and beyond by sourcing a replacement motor for me. My previous experiences with out-of-state repair vendors had been far from ideal, so working with Amann was a refreshing change. If you're looking for someone who truly knows Tin Lizzy machines and provides honest, knowledgeable, and reliable service, I highly recommend Amann.

Floyd's is our go to for all our sewing machines! They do a great job and are reasonably price.read more

Crown plating is a very established plating shop located downtown. The shop has been around for a…read morelong time for a very easy reason, they do great work at fair prices. I've just gotten to the point where this is the only place l will go, l don't need to worry about service, price or schedules because Joe and his crew will bring in a superlative product ahead of schedule and at an outstanding price. If you need plating done, make this your first stop or your last.

Permanently closed. :( I was excited by the other review…read morefrom David R. to have found a place close by that does great work at fair prices, but no more ... at this location.

Excellent service. They've always been professional and fair. We had them tune up our snowblower…read more When I picked it up I thought I was getting the wrong machine. It looked completely new (about six winters old). Croft straightened all the blades, made the secondary propeller hum once again (or whatever the thing is that shoots the snow up through the tube). And, the coup de grace -- the beaten and worn scraper was beautifully finished with a new, perfectly straight blade. They've provided the same great attention to our chainsaws. Plus, they are always upfront about something being worthy (or not) of repair. Great shop.

On November,13 2025 I called Paul's All Right (Wrong) Sales & Services about repairing my…read moresnowblower. I mentioned that I had my snowblower repaired last year and thought it was $25.00 for pickup and delivery because they said it would be $35.00 now. And I remember they use to do it for free probably because they were hard up for business. Robbie started to get a little irritated at me. We talked about what was wrong withe machine. He said it would need the cable and probably the dashboard too and it would cost $90 for labor $67.00 for parts and $35.00 for pickup and delivery total $192.00 plus tax about $200. So I said just come and pick it up, they said okay it will probably be tomorrow. They called me a couple hours later and said can they pick it up now? I said sure. The very next day they called me and said we will need to order the parts from a different place because Husqvarna is out until March of 2026. I will cost $20.00 more. He also said that I should also get these things fix the Auger is bent and the Scraper blade all need to be replaced. Total charge would be $550.00, I said I will get back to you. I went down to to the shop and Talked to Emily I told her I could get all the parts for $67.00 the dashboard and cable through Amazon. Emily said we don't buy through Amazon. I said how much it will be she said $240.00 I said including tax? Then I took a business card and wrote down $240 she didn't say anything, then I left. Emily called me up November 24 at 2.36 pm and said your snow blower is ready and its $252 and you need to pay for it and we will bring it up. I immediately said we agreed on $240.00 including tax she said there's $12.00 shipping. We argued and I think I said why are being such a bitch. Anyway we continued argue about the extra $12.00 then she hung up on me. I called her back and said I will give you a credit card but I will back charge the extra $12.00 she said I need cash then. I called a few days later I have cashiers check they said they will not take it only cash and you have been a pain in the ass speaking real loud yelling at me. Then they said I have 30 days to pick it up. If you look around on the internet you will see all the negative comments about them including the Better Business Bureau. Their customer service is horrible mainly with Emily. Some of the other complaint is how they find other problems with your machine other than what you wanted fix. They also told people that their machine was a piece of sh*t. They have also told customers to get the F**K off their property. This company should not be in business please do not do business with them you will probably regret it. My name Paul Guymon I have lived in Bountiful for 35 years and have been treated this bad by any business. When I called Paul's to pay for my snow blower repair they told me that Croft doesn't want my business. I went to Croft on last Friday to talk about their Honda snow blower and maybe buy one. I told one salesman about my problem with Paul's he must have called them and they told their side of the story. If its true that an employee said that Croft doesn't want my business. That employee needs be taught that all customers are important. I don't think Croft is anything like Paul's they try their best to treat customers with the best respect. If you look at the comment about Paul's company on yelp, BBB and others you can read they treat some of their customer like crap. They use foul language and threaten them.

The only upholsterer I'll use. Very competitively priced and spot-on to the detail. Hal's been…read moredoing custom upholstery since the 1970s. He did my motorcycle seat and showed me some the projects that he was working on. Amazing work. And my seat was perfect.

I would never take anything to this place again, overpriced, would not stand behind his so called…read morework, and took him 5 weeks longer them what I was told for a very simple repair. TIME TO HANG UP YOUR NEEDLES, CHARLIE.

lacking customer service skills!…read more if you're going to pick up the phone and ask if we mind being placed on hold then placing us immediately on hold without waiting for a response (f'n rude) why bother picking up the phone to begin with? 38 minutes on hold already with several attempts from another line, asked if i mind being placed on hold and then put on hold. not rocket science gang. at the very least, have an aswering service take name, #, need so that you can call back when convenient. if you are walk in only, please put that on your recording

Knowledgeable, helpful and friendly. Took care of my chainsaw. Only complaint was took longer to…read morerepair than original estimate. Would Recommend this business for repairs