Welded a fix to an old convertible dolly for me that was my uncles. Great service and a fair…read moreprice. Highly recommended!

My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

General Sheet Metal provides top quality, fair and competitive pricing, with incredible talent and…read moreprofessionalism. After a tour of their shop, you could tell they have passion and pride in what they do. If there's something you need created, whether it be architectural, HVAC or custom metals, they have the tools and the talent to bring the vision to life.

General Sheet Metal is absolutely outstanding! I needed to get a piece of 28-gauge stainless steel…read morecut and bent to cover the wall under my range hood where a combination microwave / range hood had previously been installed. While this would seem like something that ANY sheet metal shop should be able to do, NONE of the shops I contacted in Vancouver could do it, nor could any of the business they recommended. I called General based on a recommendation from a family friend, and I'm very happy that I did! The employee who answered the phone was extremely polite and helpful, and transferred me to the fabrication department. I spoke with Jeff, and described to him what I wanted. He said, "Sure, we can do that", and advised that it would only take about an hour, adding that they may not be able to do it while I wait, but that they'd get it done right away if I dropped it off to them. When I arrived to get the work done, the employee at the front desk escorted me to the fabrication department to talk with Jeff. This gave me a good view of the shop, and I was extremely impressed with how clean it was, how huge it was, and how modern and high-tech the equipment was. I was also impressed with how quiet it was! Safety was clearly demonstrated everywhere, with signage, barricades, etc. I met with Jeff and showed him my crude drawing of what I was looking for. He advised that they probably couldn't do the very short 90-degree bends that I'd wanted, and suggested doing two much shallower bends to create a sloping angled surface. I liked that suggestion far better than my idea, so we went with that. I received a call the next day from another very friendly and helpful employee advising that the work was done, and that I could come by and pick it up at any time. I did so the very next day, and the results are PERFECT!!! The work was completed with 100% accuracy, and the end result looks FAR better than I hoped. Without exception, everybody that I dealt with at General, from the front desk, to fabrication, to accounting, was supremely helpful, friendly, knowledgeable, and a pleasure to work with. They did the job completely, accurately, and exactly as desired, and they did so very quickly and at a very reasonable price (labor only, since I brought them the stock). I'm extremely happy with the end result, and hope that I need more metal work done in the future, so I have a reason to return to General Sheet Metal.

FLO FAB EXTREMELY Accommodating, really great customer service! IF YOU HAVE A PROJECT OR ANY WORK…read moreWELDED Dustin is A PRO! He is also a lifesaver. He didn't charge me full price knowing i had gotten ripped off somewhere else, FAB Flo helped me out on a Friday afterhours with just a phone message, he contacted me within 5 min! Then agreed to do it that day... A friday night. He completed the project in a very very short time! It was done very well this time by Fo Fab! after having been done by another welder and paid for a very crappy job, it turned out crooked not even square. So Flo Fab really came through. AND did it for a reasonable price even though it could have cost me in the hundreds somewhere else!

Dustin did a great job for me. Contacted for mobile welding to repair a gate on my property. Came…read moreout and provided recommendations to solve my issues and quickly performed the repairs flawlessly. I would recommend!

Fahey is an institution in the Pacific NW - in a good way! They sold me my first precision saw…read moreback in the 1990's and they are still at it in 2016. Premier customer service, cutting edge knowledge, and the best lines of equipment.

They did a good job fabricating a part from scratch. Was done pretty quick and fit perfect.read more

these people are extremely customer friendly! they rescued my old sprinkler fir me! if you…read morehave a need for a machine shop, check them out! cheers, and thank you!

Worst service ever. Prices are high and they never finish the job they said they would. Avoid this…read moreplace

Great small-job shop. They've saved me a few times…read more They'll be my first choice for a CNC shop when I'm ready to run a few products.

I can't say enough good about the folks at C & L Metal Sales. For the past 7 years, Cassidy has…read morebeat her competition and won our business. Not only with pricing but personality! She provides an invaluable service for us as our primary steel vendor. Their reliability and integrity has been greatly appreciated, through these past couple years especially. I always look forward to working with them. If you haven't used C&L, you're probably paying too much.

I've been doing business with Cindy for several years. Her company is great and very responsive…read morewith pricing that's sharp and very competitive.

I experienced parking lot damage to my mobility scooter carrier which made it potentially unsafe to…read moreuse. Assessed the damage and knew I needed a metal pro to straighten damaged steel part. Casey to the rescue in a pinch. Super Friendly, and quick to complete repair at a very fair price. Thanks for being there.

I'm a commercial fisherman in Alaska by trade so I spend a lot of time around welded metal. First…read moretime customer and I needed help with our delivery truck right before a holiday weekend. Casey said he had a full day and would do his best to fit me in. He was professional, personable, and a good welder. Not only did he fit in my repair on a door hinge but he also attended to all the hinges to make sure they were reinforced and unlikely to have the same problem as my damaged one. Great service. I'll trust him on the next job for sure.