We're so happy with the job Miguel and his team did in our backyard! He was incredibly responsive…read morefrom the start, and the work began as soon as the materials arrived. We also wanted new concrete, and Miguel connected us with his contact--Jose--who did a great job on that part. Once the concrete was in, Miguel came back and installed the awning, and honestly, it turned out even better than we expected. The awning came with a fan, lights, and outlets--everything was done professionally and with attention to detail. Highly recommend Miguel and his team. Friendly, efficient, and quality

I cannot say enough about what an amazing job they did on our patio. From estimate to completion…read moreMiquel took the time to answer all my questions and gave me great, honest advice. Prices are very reasonable and the job was done in one day. Thank you again!!!

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

From start to finish, their communication and service were top notch. I've been trying to find…read moresomeone to help with a fabrication for a kitchen hood vent, and finally, found the right company to do it! I would strongly recommend using C & H for your any of your fabrication needs. Great job!

Never show up and never respond after making the appointment sounded good on the phone but never…read moreshows up

I noticed one of my exterior French doors was sagging from a top hinge. I saw a crack running down…read morethe frame where the hinge was attached. I thought the doors were going to be trashed. Isaac was quick to respond to my call. Came over the next day and took a look at the issue. Luckily it was something else but Isaac still took the time to help me repair it for a fraction of what he estimated. The door works great now. He's honest, communicative, works clean and fast.

I don't write a lot of reviews, but Kevin and his father, Hamlet, at H Ironworks definitely deserve…read moreone. I called H Ironworks and spoke with Kevin about fabricating a custom steel cable tension brace to support a shade sail spanning about 35 feet. He and his father came out to my house, listened to what I was trying to accomplish, took measurements, and then went back to the shop to figure out the best way to build it. About a week later they returned for a test fit, and everything lined up perfectly. The following week they brought it back powder coated, and I couldn't have been happier. The workmanship was outstanding--beautiful finish, clean welds, and it looked like it had always belonged there. Just as important, Kevin and Hamlet are genuinely nice people. They're easy to work with, communicate well, show up when they say they will, and clearly take pride in what they do. I would recommend H Ironworks without a second thought. Five stars all the way. Thank again guys! Jesse

I recently had a pleasure working with H Ironworks To fabricate custom side yard gate and really…read morehappy with their work! The craftsmanship is so superb and I definitely got very personal attention to detail on every step of process. Them not having hundreds of reviews made me bit nervous but Kevin and his team's initial detail oriented proposal made me taking a leap of faith and I'm so glad I did! Kevin Sr. Is a true artist and Kevin's handling on thorough process from the initial design to installation is top notch and I'm not very easily pleased person when it comes to construction related projects!

Back in October 2021, I was very fortunate to have found Lango Welding on yelp. Andres, the owner,…read moreresponded to me promptly. The next day he arrived at my house to discuss the projects, do the measurements, and give me a quote. As of today, Andres has done a total of 3 projects for me. I wanted metal side gates for both sides of my house. One is to replace the old and weathered wooden gate, and the other one is to add extra security to the side of my house where the bedroom windows are located. I showed Andres the design I wanted, and he was able to transform my vision into reality. The turnaround time was only two weeks. Today, more than four years after Andres' team had completed the work, the side gates are still looking fantastic!! We did black powder coating on all 3 projects. This process truly helps the gates to look as good as new for many years to come. I am extremely pleased with what Andres and his team have delivered. Andres' son came to my house to do the welding and installations. He's a true professional. He was able to complete the projects in a timely manner. The third project was a custom design security door for the back of my house. I sent Andres the photo of what I wanted, and again his team was able to create what I asked for. I absolutely love love love this door. Even after 4 years, it's still looking perfect!! This project took a lot longer, over 2.5 months to complete. Keep in mind that this was during the pandemic in January 2022. In the end, I was truly satisfied with the results, so it was definitely worth all the wait. I hope to hire Andres and his team to do more projects for me in the near future. I greatly respect his magnificent work and craftsmanship. He's got an eye for detail!!

Since our gate install, I've had Andres and his team create a matching custom dog door security…read moredoor for my house and do a design on the top of my wall. My house looks amazing. Andres is wonderful to work with.

AWESOME WELDING…read more Fixed our sad very old gate quickly. It's stronger and better than ever. Our home was built in 1930, so we are glad to have t working perfectly. This place does good, solid work, and they are friendly. Deeply appreciated the stellar welding!

Joe was great! My apartment had a wrought iron handrail that rusted and broke apart at the base…read more Joe came out and gave me a very reasonable estimate. He was easy to communicate with, timely and did a wonderful job repairing both handrails for my apartment complex.

I need to give a shot out to owner Steve Campos of LA Welding & Repair. I have a set of my favorite…read more"Rocking" wrought iron patio chairs which had suffered a failure at a welded point. I spent months calling various patio furniture shops in the greater Los Angeles area seeking someone who could help me repair these chairs, to no avail. I was giving up any hope of being able to use these chairs again. I used Google Gemini AI to find Steve of LA Welding and Repair! I called and Steve answered the phone. I described my problem and Steve said he could HELP ME! Yikes unbelievable! I live in Pasadena and he offered to pick up the chairs at my residence, repair them, and return them. It was seamless. Just as promised he picked up the chairs and returned them repaired the following day. The fee was reasonable and the repair was perfect. I would highly recommend LA welding & repair. He also does wrought iron gate repairs and other projects. I will be using him in the future based on my experience. Thank you, Steve

As a professional handyman I appreciate Steve at LA Welding & Repair. I called 3 welders looking…read morefor someone to repair a stair rail. Steve is the only one who called me back. He was very accommodating to my schedule. He did the repair while I waited saving me a 2nd trip. His work is very clean and efficient. I will recommend him to all the other pros I work with.

Top tier and all around the best! I am truly grateful that I choose Ornamental Welding and repair…read more Two gates repaired due to the fire department coming through our property to put neighbors fire out. Wow! The city of Los Angeles refused to honor and repair extreme damage, and although I am blessed my house did not catch fire, I am fortunate to have found George...The price is beyond right, Look no further and call him.

Jorge and his assistant did a very nice job replacing the iron gate that is in the front of my…read morehouse.