Tanner did a great job getting us back on the water. He is honest and efficient. Very fair prices…read moretoo. Would highly recommend!

I have used Kernodle a couple times and have been vert pleased. On time, great communication, and…read morequality work. He Is helpful when it comes to any questions or recommendations. The best part, they are mobile and will come to you for their services! professional and personable. Plenty of choices out there for Marine Services, but I will only be using them for all my needs.

These guys are a joke; they have no clue what they are doing…read more I had a part that needed to be returned to Yamaha to re-program it. I was told by Yamaha to send in the part thru a dealer, and they would re-program it for free. I went thru Norfolk Marine (Big Mistake). I dropped the part off on Wednesday and explained to the service manager what had happened and exactly what Yamaha told me. I also provided him the information Yamaha requested to be sent in with the part. He said he would have his tech look at it, I asked him why and that it just needed to be forwarded to Yamaha, he said just to verify the part. A few hours later I received a call from him saying a Yamaha tech would be out to program and install the part. I said that Yamaha was very specific stating the part could only be programmed at Yamaha. I asked him if he spoke to Yamaha and he said yes (this was a bold face lie) and they told him it could be programmed in the field. He told me the tech would meet me at 8:00AM that Friday. I took off of work Friday morning and the tech did not show, I tried to call the service department's manager at 9:00AM, and he was not in, the receptionist said she would let him know when he came in, he returned my call about 15 minutes later and said the tech was wrapping up and would be out shortly, he showed up around 10:00AM and told me no one had scheduled him to come out to my boat. He spent about an hour or so and could not get the part to work, he then called his office and tried a couple of other things, still did not work, he then called Yamaha, and they said the part would have to be sent to them in order to get it re-programmed (waste of 4-days). They then sent it to Yamaha, and it went through some problems there. Yamaha finally got it programmed and overnighted it back to Norfolk Marine (Thursday). I called Norfolk Marine the next day (Friday) and they said it did not come in and they would be looking for it. I called the following Monday, and they said it still had not shown, I then called Yamaha, and they told me it was signed for and gave me the tracking number. I entered the number, and it said it had been delivered the prior Friday. I called Norfolk Marine, and they went on an Easter egg hunt, come to find out it was delivered to the parts department and they refused it and told UPS it was supposed to go to Yamaha. It has been over 5-weeks, and I have not been able to use my boat, the part is now missing, and Norfolk Marine has no clue where it is.

On 21 June '25 i took my 2006 Hurricane Deck boat in for a 'Fuel filtering & purifying' service due…read moreto the outboard motor (Yamaha 115HP) being sluggish above ~3,500RPM. I explained within the last year I had changed out all fuel filters (between squeeze bulb and low pressure fuel pump, between low pressure fuel pump and Vapor Separator Tank (VST), high pressure fuel filter in VST), replaced High Pressure Fuel pump, fuel injectors, and installed a fuel water separator. I called on Wed. (25 June) to check on status of repairs and was notified by service manager that a technician had taken a fuel sample and identified that there was no issue with the fuel. I do not know the location (inside fuel tank?, fuel line off squeeze bulb?) of the fuel sample that the technician took. Additionally, I was informed the technician noted there were Auto Lite spark plugs in the outboard motor and changed the spark plugs to NGK (OEM) and stated the engine ran fine and was ready to go. Of note, I had changed those spark plugs to Auto Lite's (which are marine replacements for a Yamaha F115) last year. Cost was ~$417. I took the boat home on Fri. (27 June) and ran it in the water (NO CHANGE TO THE SLUGGISH CONDITION). After further troubleshooting myself I identified the engine oil level was way above normal (indicating a low pressure fuel pump dumping gas into the oil). I changed out the low pressure fuel pump and I'm in the process of cleaning/changing out fuel injectors. My frustration is that no one contacted me about not doing the fuel filtering & purifying, changing spark plugs, etc. before I called to check on status. Furthermore, I found the 'way above normal engine oil level'. I will never do any business with Norfolk Marine again.

These guys are great! I had my beloved Bauer dingy suffer an impalement on a boat lift during a…read moreNor'easter, leaving an ugly puncture wound in the hull much beyond by ability to repair. Tynes Fiberglass was able to make the repair appear as though it never happened. I highly recommend this team and would do business with them again! Thank you!

I have a 1991 38ft RV that had damage to the fiberglass requiring a very complicated repair that…read moreincluded structural fabrication. Richard Tynes made the repair in 2 days and it turned out absolutely beautiful and I couldn't be more impressed with the results!

Amazing customer service!! We purchased a used boat from Wright marine and they went above and…read morebeyond to make sure everything was perfect. Even took the cover to an upholsterer to have snap fixed. I would highly recommend for new purchases and service. We will be customers for life. Great people!! Thanks Melissa and Kevin!!

Although they we able to help me get a boat wrapped for a reasonable price, they refused a refund…read moreor compensation when the job failed its purpose. The wrap came apart and snapped both antenna and scratched the engine cowlings.

I found Budget Boats on Facebook marketplace when I was searching for a trailer for my pontoon…read more Chandler replied to all my messages promptly and straightforward. After he informed me of his inventory and the cost, I felt confident enough to stop by for a possible purchase. When my husband and I arrived, Chandler texted that Craig Allen would be assisting on his behalf. Craig was very welcoming and knowledgeable. We were very happy with our purchase and the price was very reasonable. I would definitely recommend Budget Boats and the team working together to make their customers happy. The experience could not have been better. Thank you, guys!

Bought a few used items to get me legal on the water. Robert was helpful and polite. Going back for…read moremy outboard maintenance supplies.

Used several times and he kept changing his price per foot where I had to get a record via text and…read morethen show to him to get original price quoted. He then delayed a cleaning for 6 weeks even though he had plenty of time. So I changed divers. Bad attitude, do not use him. Plenty of way better divers at this marina.

Excellent service !!! Perfect underwater cleaning. We use on our race boats!!!…read moreGreat detailing ! Insured & boned, unlike other divers !! Good price!!!

Top notch place for repairs and haul out.. many factory certified mechanics. Also great place to…read morewinter your boat.

My boat was recently hauled and painted great job and attention to service has been greatread more

Biggest waste of money in a long time! Paid for ceramic coating and he used some shit in spray…read morebottle from advance auto! Like i said it was the biggest joke and waste of money. Did 2 boats for me and neither looked any better than if you just washed it!! It was a wet day when ge finished them up and it didnt look too bad while wet but when they dried the finish looked worse!

great and response time was unreal They are doing a dive for…read moreMe on Tuesday to help with electric to motors on long creek