I was completely satisfied by the work done by Hoffman Concrete. The work done was professional,…read moretimely, affordable, and communication between me and their representatives was fabulous. I don't usually write reviews but decided to this time because I am a satisfied customer and I think when I'm looking for a company, I want to see if that company has good reviews and if they keep their word. This one did for me...every single word. I'd use them again if needed (though they did such a good job I likely won't until we move!)

We hired Hoffman Concrete for a sidewalk project and paid a deposit of $3,000. The work was left…read moreunfinished, and despite numerous attempts over 10 months, we were unable to get the job completed or our deposit refunded. We sent a formal demand letter and ultimately had to pursue small claims court to resolve it. If you're considering this company, get a detailed written contract with a completion timeline and milestone-based payments rather than a large upfront deposit. We wish we'd done more due diligence before paying anything upfront.

This business is amazing!! It reminded me of the way business was conducted years ago. They are…read moredown-to-earth, competent, professional, respectful, kind, and the work was completed within 20 to 30 minutes (probably less). Although I may not need this type of help in the near future, I would go to them for help in a minute and highly recommend these folks. Thanks so much for your help and kindness. Doc

These guys are terrific! We needed a patio chair welded and that took care of it in 10 minutes…read more Would highly recommend!

Booms Welding are a great team who were a big help - Joel the owner, with Stephen and Brandon…read more We had an upright pellet smoker that needed repair and they fixed it up so well that we can't even see the repair... BUT we know that what did not work now does work! Thank you, Booms Welding!!! - - - We ordered a pellet smoker and the first one that was delivered was clearly damaged, seemingly before it was put in the box at the factory; the manufacturer sent us a replacement, and since the first one was too big to send back, they let us keep it. The smoker is upright, similar to a dorm or hotel refrigerator (but bigger), and the damage made it out-of-square... it was tilted just a bit, and that bit was just enough to prevent the shelves from being supported on all four corners... if we were to use it and to put meat on it to cook, a sizable amount would have made the shelf tilt and fall. We had met Joel before, searching for help on another home project; Joel was very friendly and helpful; while the part we needed repaired couldn't be repaired (we ultimately found an unexpected replacement...), Joel was straightforward... he clearly understood our ask and shared why he wanted to help but just couldn't. That impressed us. So when we needed the smoker repaired, we called Joel. He came to visit and to determine what to do; Joel suspected that welding a couple metal pieces inside the smoker would provide the support that the shelves needed. We just needed to get the smoker to their shop and their welding equipment. We took the smoker to Booms and dropped it off. Within an hour they had it repaired... they were able to straighten the frame and to then make two welds to hold it in the straightened position. The repair was done so well and so professionally that, when they showed us the two welds, which they painted, in the bright outside sunshine, we could barely the repairs... the smoker, with the welds, looked like brand new. And thus we had a smoker to share with a friend. Thank you, Joel, Stephen and Brandon!! - - - - - -

I've been waiting on a few dominos to fall in order to start the permit process to install some…read moreracks in my warehouse, and one of the later dominos that needed to drop was getting some cross bars cut down to size. Due to some dates being pushed up, I needed those bars to be cut down sooner rather than later. I emailed info@booms and had a response within the hour. They asked me if I wanted to bring the bars in or have them pick-up; I chose to deliver them directly to Booms and the gentlemen I spoke with said he should have them done by the end of the day. He notified me later that afternoon that they were done. I just picked the bars up and they look amazing. Exactly what I needed, just as specified. I am very pleased with the work performed by Booms. If you are looking for a professional, local, reliable, and quality metal fabricator - I would highly suggest Booms. I've already mentioned to Booms that I will be in contact about some future projects.

Woodard has been absolutely the best company to work with. I had a pipe burst in an upstairs…read morebathroom that caused damage to all three levels of my home. Everyone at the company has been friendly, helpful, and professional from start to finish. Our construction foreman, Kevin, is amazing and absolutely the hardest working person. He is here everyday and his communication is amazing. He talks to me everyday and tells me what the plans are and keeps me informed. He's great about sending texts and leaving messages if I'm busy working as well. I definitely would recommend this company to family and friend!

For years, I've tried every over-the-counter grout cleaner and it's never made it a single lick of…read moredifference. Today Jeremy came, and in a little over an hour my grout looked brand new. Jeremy was polite, punctual, very friendly and clearly cared deeply about doing a great job. I can't believe I didn't do this years ago.

WARNING: DO NOT DO BUSINESS WITH BATES ELECTRIC. If you do prepare for headaches and some sketchy,…read moreunreliable work that will cost you more down the road. You've had multiple opportunities to rectify the issues. Number of issues: 1. Knew when we built the home 5 years ago that they poorly placed the electrical panel in the basement. They failed to install per the plans and they placed it between the egress window and bathroom. Pretty ill-advised common sense move. Now that we are finishing the basement about a dozen contractors have stopped by and looked at it and said something along the lines of "who is the idiot that installed your electrical panel" 2. Within a year of moving in INDOOR outlets that were NOT sealed properly and were freezing from the outside moisture. 3. There is an outdoor outlets that has never worked on the side of the house. 4. Breaker keep popping on outdoor outlets. They went 15A instead of 20A. Once again, not great common sense for outdoor outlets. Overall, this is not a company I would do business with. Once they cashed the check, there is no follow up or even communication to warranty their work. One positive is that the electrician working on our home was flexible and always tried to meet our request.

I purchased a new townhome and it needed lots of electrical work…read more They sent two men they have worked tirelessly for a couple weeks on my house .... This is not a flyby night company everything is done by the book. It was not cheap. It was very reasonable. Don't forget in today's world you get what you pay for! Electrical work is very important to be done properly with permit and an inspection.

I have used Specialty Awning's for about 30 years now. I have had awnings recovered about every 10…read moreyears. They have done a nice job.

We had an entryway awning installed on a building on our church property in 2017. Our experience…read moreworking with Specialty Awning was positive from start to finish. The awning is beautiful and very sturdy. We highly recommend this company!

I highly recommend Northwest Electric. Jim was polite on…read morethe phone and assured myself the Electrian would arrive between 10-1030. Steve arrived at 10AM. He was polite and courteous. Steve explained the failure of my outlet and corrected the problem.

We had previously used Northwest to upgrade our service panel and mast. Jim was very knowledgeable…read moreand explained the proposal in detail. Great job on that work a year ago. This summer we were in a time crunch to get our house on the market. We turned to Northwest again to make certain we were up to code. Jason did the work and was fantastic. Again, explaining all work, and doing a thorough job. We'll use them again on our new house.

I had an unusual issue with my refrigerator where the leveling legs were not screwed on when it was…read moredelivered. I didn't realize until the delivery company had already left. They called the morning of the appointment before arriving with a time estimate and chatted with me more about the issue. When he arrived, he installed the legs, leveled and checked the refrigerator, and we are back in business. Price was exactly as quoted.

Came out very timely to look at our leaky dishwasher. I love that the fee goes toward a repair…read moreshould we have used ABS for the repair. Thankfully the tech was honest and told us it would be more financially to replace it than fix it. I appreciate the candor.