I shopped around for a yard to do some fiberglass work on my whaler and I'm very glad a chose Safe…read moreHarbor. Scott and Trip were amazing from start to finish. Not only did they do an amazing job on the repair but they were very communicative and personable the whole way through. My trailer jack gave out while they were working on the boat and Trip (a manager) went out of his way to personally go buy a replacement for no additional cost to me. These guys are top notch, honest, and fair. They definitely take care of their customers. Would go to them again in a heartbeat!

We frequently use Safe Harbor Shelter Island for our boat repair and maintenance needs. They are…read moreorganized, Scott does an amazing job of managing the yard, and it's easy to find a vendor there. Keep up the great work!

We were having trouble with our Head not flushing. Steve said we should try removing any TP that…read morewas left in the bowl. That did the trick immediately. Coast to Coast is now a new member of our boat maintenance team. We couldn't be happier!

Unfortunately, this is not the same service as it used to be Stephen who runs this as let me down…read moreseveral times as yet to fix my alternator has made promises and deadlines that have not been lived up to do not call this service. This is not reliable.

I called MW Marine to have a new carburetor installed on my 2006 Bayliner 265 with a 5.7…read moreMercruiser. Mahlon contacted me the very next day. We talked about the issues I was having with my boat. He was able to come to my boat a few days later and identified the problem. Mahlon installed the new carburetor. He came back a second day to do some final adjustments. The boat started and sounds great!!! Mahlon was professional, knowledgeable, and reasonably priced. I highly recommend MW Marine and I will definitely use MW Marine again.

I cannot say enough about this small business. The owner Mahlon is one of the finest contractors I…read morehave ever worked with, period. I had a Silverton MY 352 I was trying to sell in Coronado, CA but reside in Pensacola, FL I struggled with trying to get repairs done I needed to sell the boat. I called and flew to San Diego to find a company to do the repairs I needed. Each one I talked to said they would show up. No one ever did! Then I learned of MW and everything changed immediately. Mahlon called me back right after I called from Florida. He showed up the NEXT DAY and accessed the repairs I needed. He then laid out a game plan to take on each necessary repair and quoted costs up front. Once given the go, he kept me informed along every step of the way, providing pictures of before and after with every repair. Can't say enough about this young man and his company. HIGHLY RECOMMEND. Trust me, you will not be disappointed. S, TK CAPT USN Ret.

My boat went to the yard for bottom paint and standard engine maintenance. And like any trip to…read morethe yard, a few unanticipated items arose... And with that, I cannot say enough good things about how the folks at Driscoll Boat Works helped get me out and back in as efficiently as possible. The yard did a great job, and when I mentioned some bonding issues I was having with my boat, Stephen took it upon himself to do the research to determine a bonding wire had never been connected to the center tilt hydraulic cylinders. We got that remedied, and they also fixed an intermittent trim tab actuator issue. I always prep my boat for the yard, and I would suggest that you cover surfaces where workers need to go to do work. With the right preparation, my boat comes back fine. I also always give my total plan to the yard team in advance, so they know all the players coming in, and can better coordinate. This way, I can be in and out of the yard efficiently. I really like how I get quick text updates that the engine team arrived or finished, the electrical guys are working, here's the launch plan, etc. Like anything in life, you get out of it what you put into it. Boats require several teams to come in and out and not be in each other's way, so if you let the Driscoll team know the bigger plan, they help make it all happen. Big thanks to Team Driscoll for getting us back in the water and off to Catalina!

I had my 50' Bertram Sportfisher in with Driscoll for the haul-out this year. The work included…read morenew bottom paint, removal and replacement of rudder logs and rudders, fiberglass repair, install of new underwater lights, new batteries, new strainers, new raw water pumps, paint touch up, waxing etc. Some of the work was performed by Driscoll employees and some by yard approved subcontractors. The boat was in their possession for two months. They were short on space so at one point they put the boat back in the water and tied it up to their dock for two weeks. Then re-hauled it and blocked it again. Communication there it non-existent. Multiple calls and emails went unanswered as to the progress of the work. My project manager was Keith Dodson, working under Steve Driscoll. When they did finish there was never a chance to review the work. I simply received a call that the boat was in the water and need to be picked up. Upon arrival the boat was extremely dirty with rags and debris throughout the cockpit and salon. No effort was made to clean-up. The headliner in the VIP stateroom was laying on the floor. I was missing dock lines and fenders. The bow rail had been hit by something and was bent to the point that the aluminum cracked (this was a $6500 repair on my dime). The rudders were inoperable (there was no fluid in the system, it was full of air). I was told the inop rudders was due to a leaking steering cylinder and that they could replace this. I refused the replacement, there was no leak prior. I instead had had them fill the system and pressurize it. No surprise, the cylinder did not leak. The issue was they had removed the hydraulic hoses as part of the rudder replacement and did not refill and charge the system. Keith tried covering this by blaming the cylinder and attempting to sell and install an unnecessary replacement. All responsibility for the damaged bow railing was denied. It was not bent when the boat was dropped off, it was bent on return. Keith said it was impossible to determine what happened but they were certainly not responsible. Emails to Driscoll ownership regarding the railing went unanswered. Keith Dodson told me to contact my insurance company. I am not someone that cuts corners and was a good paying customer. My haul-out this year was over $140,000. $38,000 of that was yard fees alone. I will never go back here. I would encourage anyone to look elsewhere.

10 out of 10. Semo and his team have been tending to our vessel for a couple years now. They are…read morerighteous, honest, and make sure that their efforts in cleaning maximize the longevity of your bottom paint, also very affordable and seamless.

Great professional service! Diversified Yacht Care came to my boat on short notice and plugged a…read moreleak which could have become serious. The diver was prompt, knowledgeable, efficient and did high-quality work. The price of the service was very fair. I recommend them highly.

Chavez and his team are straight up! Great work and is very efficient. The value of the paint and…read morethe amount of work put into it is amazing. Come check out this place its worth your time!!

The team was very responsive, on time and did what they said they would do. What else do you want?…read more Recommend.

This review should be Zero stars for FWM but they did convince me to spend a lot of money and for…read moreawhile I believed they had my best interests in mind. That was my biggest mistake. The main proprietor, Gary, seems extremely knowledgeable but it doesn't matter if he's not doing the job and there is no Quality Assurance of the work performed. Each time I received my boat back from FWM, it was a mess with oil and fluids everywhere and additional problems to follow shortly after. I repeatedly tried to trust this outfit but it was in vain. Before you use FWM, ask who is doing the work and how they will ensure quality control of the work they do. A technician sent alone to my vessel was a fluid tech from automotive field with little knowledge of the boat he was working on. Service writer is extremely nice and friendly but also a transplant from automotive. Business partner is a hot head and was incapable of reinstalling a sea water impeller which I had to do for them while they present and were being paid to work on my vessel. After performing two major services to my vessel, requiring haul-out and lengthy down-time, FWM failed to properly secure an exhaust bypass hose connected to a through-hull and the result was an engine room filled with diesel exhaust that shut off power the the turbo and rendered my vessel nearly limp in open seas under rough conditions. The culprit was two hose clamps left open after their removal of transmission for a service that may have caused additional and larger issues. The soot alone coated every inch of the engine room and ruined the fresh air intakes for two engines. Leaving the boat a mess after service is bad enough. Having additional mechanical issues on the same component after two very expensive and connected repairs is extremely coincidental. But, creating potentially catastrophic damage to a vessel off-shore and underway is negligence and should be criminal. Instead of taking any responsibility, Gary will defend this by pointing out how I lost my cool when they reported a completely damaged outrigger through saying, "I'm sure you know about this already" and then telling me "it's not our responsibility to give you the name of the person that told us". Or how I was upset when I received a lecture on "Industry Standards" after I alerted them that the tech should not start the engines without opening the raw water intakes first. I'm sure FWM feels they did the best for me. That is the scary part. They feel righteous about their work. Rather, they failed each time to even clean up after themselves, left bolts out when doing reassembly, damaged in-tact hoses during reassembly causing leaks, and failed to secure a critical exhaust hose leading to multiple issues and eventually causing a major cleanup job and replacement of expensive components. Each time FWM has defended themselves instead of doing the job right or at least providing a customer with proper info an opportunity to ask if the issues were related. Yet, still I paid and paid and even wanted them to come back and finish the job. Why? Because they were to my knowledge at the time, the only show in town and also because I believed they would make it right. Boy was I wrong. Part, service writers, and techs are not to blame here. This review lies squarely on the owners. They present a heck of a front and even take the time to write lengthly dissertations on their work but they don't follow through, check the work conducted by their junior technicians, or stand behind their mistakes. Worst experience about boating in 20+ years on the water. I have built and maintained relationships with all of FWM's surrounding vendors for years and thought this was to be the same. Instead, this experience makes me sure I will never own a vessel with similar components requiring me to work with this group again.

Have used these folks for over 10 years no complaints. Recently put in a battery charger which was…read moredefective. Replaced it with a more expensive one at no charge. They also make house calls!!

I am so grateful to have gotten my 42 foot Catalina worked on by Morton Marine. Ken was always a…read morephone call away, very patient, professional, honest, and easy to communicate with. His knowledge about boats and issues made it simple to figure out what needed to be done in order to fix the problems I was having. The boat was having vibration issues and I was unable to rev the rpms which made it impossible for the boat to reach a normal speeds. After hauling out and pulling the shaft we needed to get a new shaft made, new prop, and just a full overhaul. I put all my trust in him and his team and ended up with better results than I could even imagine. It's like a new boat, I'm so happy. I was terrified of the final price at first but it was very fare. That's rare. Thank you Ken, Stan, Cole, and Luke. See you soon. Captain Liz Owner of Sterling Sails

I had a very positive experience with Morton Marine Services. Initially, I was…read moreunclear about various businesses working together with Safe Harbor Marine, where I was hauling out my 33 foot sloop for bottom cleaning and painting. I advised them that I wanted two seacocks inspected and possibly replaced, as well as repacking of both the prop shaft and rudder post. Upon haulout, I was directed across the yard to Morton Marine for those engineering issues, as Safe Harbor was only handling the bottom exterior of the boat. Upon arrival, I met with Stan, who was aware of the work I had requested, and came with me to size up what was needed before the boat even left the water. He clearly understood my concerns and described a plan of action. He was certain the work would be completed within the 4 days Safe Harbor was allowing for the bottom job. Before I went home on day one, the boat was hauled and on jackstands. I was absent for day 2, but they must have hit the ground running as most of my work items were handled then. On the morning of day 3, I was back to the yard to check on progress, and found the Morton Marine employee Vadim just finishing the rudder post packing. Everything I'd asked for was done and the yard was planning for launching soon. He then told me that they had observed pin hole leaks of water from my engine exhaust hose that was next to the rudder post. I knew the hose was old, but was surprised that it was worn to the point of failure, allowing exhaust gasses into the interior of the boat, a very dangerous situation. Of course I directed that it be replaced, which was possible pierside after launching. This called for removal of a decorative panel covering a wooden box thru-way for the hose to rise vertically upward a few feet above the waterline to prevent vacuum siphoning of seawater into the engine. At this point Ken Morton (owner and ops boss) arrived and personally assisted in panel removal to ensure it was not damaged. Mine must've been the smallest job in the yard, but the attention I was getting was amazing. We then found very rusted and disintegrating stainless tubing at the top of the hose loop. Ken said he would try to find a replacement, but it might have to be fabricated (very expensive). I was resigned to the cash outlay since this was a serious safety hazard, but the next morning Ken called to advise that Stan had reminded him that a far less expensive fiberglass loop was available. Five hours later, everything was done, including Stan adjusting the prop packing gland for a proper drip rate with shaft turning ahead and astern pierside. The worksite (my galley, head, and aft cabin) was wiped down and vacuumed. Everything Vadim and Stan worked on was clean and meticulously done to the highest standards. I am very grateful to Vadim, and Stan, and Ken for their superb work and attention to a major safety issue I had missed. These are the guys I will return to for boat servicing in the future, and I wholeheartedly recommend them to anyone needing engineering work on their boat in the San Diego area.