During these rainy days I had to get my windshield wipers replaced, stopped by and they offered…read moresuper affordable options and in less than 5 mins I had paid and had the wipers installed. They were quick, affordable and super friendly. Would definitely recommend going here for all your car needs!

Good affordable parts compared to other auto parts places can't go wrong recommend it!read more

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

Did a great job on a small weld that I needed. Quick…read moreresponse, reasonable price and quality work Would definitely use them again I hope I don't have to though

I worked here as a welder for about 3 months, and honestly, this was one of the worst work…read moreexperiences I've had. I was eventually let go because I was told the supervisors weren't happy with me, but what really bothered me was the way I was trained and treated from the beginning. I was brought into the company with incorrect or very limited training, and then expected to perform like I had already been properly trained. Peter was one of the supervisors over me, and in my experience, he did not have the welding knowledge needed to properly train someone. There were times when I needed actual instruction or guidance, but instead I felt like I was being criticized for things I had never been properly shown. The supervision in general was terrible. My experiences with both Peter and Jason were consistently negative. The communication was disrespectful, and I never felt like I was being treated like someone who was genuinely trying to learn and do a good job. One situation that really stuck with me was when Peter made a comment about me while I had my welding apron tied around my waist. He told me, "I look like a girl." I didn't even say anything to him about it because I was there to work and didn't want unnecessary problems. Somehow, later on, I was the one being treated like I was causing an issue. At one point, Peter even threatened to send me home because he thought I was arguing with him when I was simply trying to communicate. The shop environment itself was another major issue. There wasn't adequate ventilation for welders, which is especially concerning when you're spending hours welding and dealing with welding fumes. The condition of the building was also poor. The insulation from the roof was falling apart and coming through the cheap ceiling in the shop. It made the workplace feel poorly maintained and not like an environment where employee safety and working conditions were being taken seriously. There also wasn't a consistent amount of work, and the equipment and resources available were limited. It was difficult to stay productive and develop as a welder when there wasn't always enough work available and the shop didn't have the resources or equipment I expected to properly support the work. What makes the whole situation frustrating is that I actually came into this job wanting to work. I'm young, but I take welding seriously. I wanted to learn, improve my skills, gain experience, and build a career in the trade. Instead, I felt like I was put into the position with poor training, limited resources, poor working conditions, and then blamed when things didn't work out. There was also a very negative atmosphere in the shop. Instead of feeling like a place where younger workers could learn from more experienced people, it often felt like there was unnecessary negativity toward younger employees who were motivated and trying to move forward. Looking back, this experience showed me exactly what kind of work environment I don't want to be part of. The biggest problems, in my opinion, were the lack of proper training, poor communication, lack of consistent work, limited equipment and resources, poor ventilation, and the overall condition of the shop. If management actually wants to improve this company, I would start with the supervision, training, and basic working conditions. New employees need proper instruction, clear expectations, constructive criticism, adequate equipment, proper ventilation, and a workplace that is maintained to a reasonable standard. Employees also shouldn't have to put up with disrespectful comments from supervisors just because they're trying to keep their job. Based on my experience, I would not recommend this company to someone looking for a place where they can learn welding, grow their skills, and be treated professionally. I came in wanting to work and improve, but I left feeling like the company failed to provide the training, environment, equipment, and professionalism I was expecting.

A motorcycle part arrived just after 4:00 pm on a Friday afternoon but unfortunately, the bolt hole…read morewas to small. My drill bit didn't make a dent. I Googled machine shops near me and PL Machine popped up just down the street. Arrived at 3:47 (13 minutes before they close). Stephanie welcomed me and proceeded to call Andrew to look at my issue. After a full micrometer intervention, Andrew enlarged the hole with his drill and I'm now able to ride this weekend. Thanks guy for making my weekend.

Wonderful service. Lead time was as promised and the quality was phenomenal. They just earned a new…read morelifetime customer! Thanks again Andrew! He definitely made the whole process easier. 10/10

I needed a custom part made for my car using 60601 aluminum. The owner was able to order the…read morematerial and makes two units of the part I need in 2 business days, which is awesome. His lead time and price was cheaper than big company's like Xometry by a long shot. I was very happy working with the owner. He was a very nice man to work with and built everything to my exact specifications. Finding a machine shop locally these days is really hard. I'm happy I found this place!!

I would not recommend perfect machinery in cypress, I had some parts made and they looked mediocre…read moreat best. Very uneven and sloppy craftsmanship.

Mitchell Bros machine shop is absolutely fantastic. There is no job too small for them. My…read moretelescope tri pod fell over and broke the mount. The metal wasn't your typical material it was more like pot metal. Mitchell bros didn't even flinch! They welded it back together, and its stronger than ever. Oh, and did I say it was a one day turnaround. Staff is very friendly and helpful. It feels like the old days where everything was done on a handshake.

We had some extremely stuck, broken bolts in a clamp for my bike's front fork. The shop was able to…read moreremove these and retap the threads within just a few hours. Everyone we interacted with was very friendly, and the price for the service was very reasonable. Would recommend!

Robert took my emergency order over the phone. I needed custom picking brackets that could be used…read moreon multiple size I beams. Robert designed, drew, presented and quoted late on a Friday. Once approved he had them made, painted and ready for pickup on Wednesday. Big Tool Manufacturing is always friendly and on point. The only company I'll ever use for fabrication.

From the owner: We are a full service metal fabrication shop that can provide inhouse fabrication without…read moreoutsourcing to keep the quality up and lead times short.

Great company that give back to the community and produces excellent machined parts.read more

Jon came out gave estimate. He was prodessional knowledgable. He just wasn't available when we…read moreneeded our project done.

Jon and his team are amazing. I had multiple quotes and not only did he have the best rate but…read morethere's a sense of integrity and intrinsic value in his work. He was on point with his timelines and his staff is friendly and focussed. You can tell they all love what they do. Even though i asked for a basic gate he still managed to add a simple design and I absolutely love it!! Don't waste your time, call him first :)