I have dealt with this business for years, buying and selling (on commission)…read more VERY ethical, knowledgeable, and pleasant to deal with. I have observed them treat folks who enter the shop with little information with professionalism and respect. Owner operator store. We need more of this kind of business in the Springs.

Nice people. Prices are fair. ................................. I'm done writing now geez Getting…read moregggfgg ghghhhh

I really wanted this transaction to go smoothly, but unfortunately my experience with Spartan…read moreDefense was disappointing. Communication was by far the biggest issue. Emails often went unanswered, and it was extremely difficult to reach anyone by phone. When you're purchasing a high-end firearm, clear and timely communication should be a priority. I placed a very expensive firearm on layaway, but encountered several issues throughout the process just because I paid with different cards to spread the cost. I am currently still waiting for the refund to be processed. I'm not questioning the products they sell, but the customer service and communication fell well below my expectations for a transaction of this value. I sincerely hope they improve their responsiveness and make the process easier for future customers.

From the transfer at the gun show to the pick up, and lack of knowledge from some of the roughly…read moretrained workers here I'm thankful they only got a transfer fee out of me. Never want to experience this place again. Shame too, we came into the experience with open arms.

I took a Glock 17 slide with a stripped screw in an rmr to these guys thinking it'd be a simple fix…read morefor their gunsmith. They invoiced a half hour of work with the caveat it may take an hour. I was slightly put off by this thinking it couldn't take more than a few minutes. But ultimately I was prepared to pay with the idea that a gunsmith could complete the task without damaging or marring my optic. I dropped it off on a Friday and they said they'd have it ready by Saturday or Tuesday of the following week. Saturday came and went, Tuesday came and went and ultimately I called them on Wednesday. I was told they didn't have the tooling to complete the job and they would need to order the tools to complete it. Later that Wednesday, I received a call from their gunsmith Nick who said he was going to have a buddy help him out so he could have it to me sooner rather than later to which I expressed my gratitude. I showed up to pick it up the following Thursday afternoon. I opened the case and my optic was covered in tape and the guy at the front desk said they'd be charging me for 2 half hour increments of work at $35 per increment. He said that it totaled $90 so I asked if the 2 increments at $35 equaled $70. He said, "yeah $70." I unwrapped the optic and it was operational but marred up more than I would have expected. The guy at the front said he had to take a dremel tool to it. It was obvious the tool had slipped a few times gashing the body of the optic. This kind of work is what I would expect if I had undertaken the job myself but not what I expected from a professional hence the reason I opted to pay someone else for the service. After that I said one thing to the guy at the front desk as respectfully as I could. "Is the price negotiable considering the damage?" The guy immediately threw the invoice on the table, said "just take it" with anger, and walked into the back. I closed everything up and left. When I got home I told my wife and even expressed if they had called me and said, " hey man this thing was a disaster and we put some gashes in the body of the optic but its operational and we got the screw out so even though we were gonna charge you for an hour worth of work we'll charge you for a half hour or give you a discount." I would've been totally understanding. However this was not the case... I can't speak for their other work or services but that was my first and last experience with this business. Hope this can be useful to anyone else.

I have used these guys for custom holsters and for cerakoting a few of my guns. I was very…read moreimpressed! The cerakoting looked better than the factory finishes! Couldn't ask for better work. One of the guys even stayed after close a few minutes to finish up my holster. My next project will be Snow Camo on one of my bows. I am confident they will do a job I can be proud of!!! Thanks Redleg!

My boyfriend had his shotgun repaired at this.place and it blow up in his face and could have…read morekilled him. DO NOT USE THIS GUY.

Went to Colorado Arms Repair to get my Glock 19 sights swapped out. He completed the work while i…read morewaited. I get home to only realized he gouged my brand night sight when he installed them. A careless act that could've been prevented!! I'm not happy and won't be returning!

I used Gun Cleaners of Colorado (Mike) as my FFL dealer for a P365XL online purchase. Mike was…read moreprofessional and quick...no fluff, just a 'get 'r dun' transaction. Mike is one of the few remaining FFL dealers in the Palmer Lake/Monument area. He keeps fightin', so I'll keep supportin' him, despite the state's best efforts to eliminate gun shops. Support your local gun shop!

Great little shop, Mike the owner is very knowledgeable and will work on your firearms if needed…read more I definitely recommend coming here

Hickman has done work for me on a couple of items. He's always quick, friendly, and reasonable on…read morecost. He has also gone above and beyond a couple of times and done extra work at no additional charge.

Several local firearms shops recommended Hickman for gunsmith services. I relied on what they…read morerecommended, and am extremely disappointed in their work and customer service. I brought in an AR-15 (complete rifle) to get some "minor" work done on the feed ramps. He sent me home with the lower because he "hated doing the paperwork for a serialzed part." The upper receiver, barrel, and (very expensive lightweight) bolt carrier group were 100% brand new, never had a single shot through them. The "polish" job that Earl told me he would do to correct a cartridge feed problem looked as if he may have been training a child to use a dremel tool. The ramps were carved down, each at different angles, not even remotely polished from whatever abrasive die he used, and worse yet, the cartridges do not even feed at all now. The barrel warranty is completely voided by his work. The barrel manufacturer (whom I have purchased many barrels from in the past) was perfectly fine with me taking the barrel to a gunsmith, and even offered to pay for the services since I wasn't completely happy with their product. They saw the pictures and were horrified, and in fact were the ones who made the first comment to the effect that it appeared as if "a kid did the work." The upper receiver was also carved out, so now any barrel I would intend to install in the future would also be required to be "heavily" modified just to get a cartridge to feed. The bullet gets completely stuck in the feedramp, and is left with very deep gouges, and in most cases, is severely pushed back into the casing. When I arrived to pick up my parts, the bead blasted stainless steel barrel was so dirty (black greasy prints), it looked like a car mechanic had been handling it. The $450 JP Precision bolt carrier was crammed into the receiver that had not even been cleaned of the metal shavings. The bolt carrier group now has a whole bunch of "custom" Earl Hickman silver racing stripes etched into the anodizing. I also visited another local gunsmith who said this is the second bad job he has seen from Hickman recently. I called back to discuss how to correct the problem, Earl was more than happy to ask me to bring the whole rifle back to him to continue with more work at an additional cost, because he was certain it had to be a lower receiver or magazine problem. The problem I have with this diagnosis is, the lower receiver was factory matched to 2 upper receivers when I purchased them, and has functioned flawlessly with the other upper and magazines for about 1000 rounds. It was my experience that they are very careless and disrespectful. I wish I could post photos!

Every time I've walked in,everyone is just so kind and friendly and helpful. And it's not like…read moreI've even really bought that much there. So I know they treat me well because they're a wonderful bunch of people. That said, when so many other places in town had no ammo, Springs Armory always seemed to be working hard to get ammo. AND, as an added bonus, when they do get new ammo (and firearms), they put out a fun and informative video to let everyone know. As a veteran, I also appreciate the deals offered as a Thank You for my service. When I am in the market for any weapons or ammo, they'll always be my first choice.

Worst experience I have ever had in a gun shop. Jackie at the front desk has a serious attitude…read moreproblem and lack of customer service. I will be telling everyone I know to not shop here. You're only as strong as your weakest link. Fellas in the back are great, but Jackie's attitude takes away from all of that. I even watched a customer leave and politely told her to have a nice day etc and she couldn't even be bothered to give that customer a thank you or goodbye. Unreal. UPDATE: response from the owner shows a lack of accountability. Not once did I have any negative interactions with anyone else but her. You can go on and on and make up lies but there are multiple reviews similar to mine stating she has a terrible attitude. You will not get any of my money and every single person I come in to contact with who shoots will know about this. Fail response and fail business. Take your money elsewhere people