I contacted FIVE fabrication shops before Van Dyke to get what I thought was a simple job. I just…read moreneeded a support cross beam for a desk cut open to mount rails under. Got a response from 1 with an outrageous quote almost disrespectful. One never followed up even after confirming on the phone they received it (It's been 3 weeks already). The others just never responded. It wasn't until I called Microform which they ALSO ignored my quote request and the representative couldn't even find my quote email (I assume they even deleted it). I was then referred by the representative to Van Dyke Fabrication who is able to do both personal and business jobs. I look them up and realize they are a good distance away from me about 35 minutes. I was shopping locally but I realized at this point why not. Well, I'm thankful for the referral because this fabrication shop is not just good, IT'S QUALITY. I was able to finally get this crossbeam fiasco done after searching for a shop for an entire MONTH. When I originally called, Barbara directed me to email John with a quote request and I was able to drop it off the same day! John even stayed extra to see the part, just to clear up what I needed exactly (He already started the day very early too). John exceeded what I expected! He told me he would have to cut the cross beam by hand with a plasma cutter since it wouldn't fit in the machines due to it's shape, which I was completely happy with since I just needed it cut open. However, when I went to pick up the part, it was replicated ENTIRELY with my request since it was easier than cutting it. Matched and fit just like the old part with improved mounting holes for more tolerance, HOLY SMOKES. This was such a nice gesture of him, it's hard to find honest businesses like this these days.

I had an odd request for Van Dyke Fabrication - to see if they could "fix" a "commercial grade"…read moremetal wedding arch I had bought for my daughter's wedding. Assembly was impossible. Nothing lined up. I had already shipped it back once to the manufacturer who sent it back supposedly "fixed"...but it wasn't! Running out of time, and desparate, I called Van Dyke Fabrication. I was astonished when Barbara told me to bring it in and John would take a look at it. Immediately I rushed it to their shop. John asked if I could leave it for a few days. Hopeful, I said yes. The very next day, he called to say I could pick up the arch! It was fixed! Thanks to Van Dyke Fabrication, my daughter's wedding was saved! I have no doubt that John can do just about ANYthing with metal!!! Friendly, knowledgeable, and fair pricing. It just doesn't get any better than that!!!

I had "No Limit" do some work on my 2010 Jeep Wrangler installed new catalytic converters. The…read morepeople there were polite and professional and would recommend them to anybody. The people there know there business and my jeep runs so much better.

Very quick to respond. Provided me with options based on my yelp message. Then I showed them my…read morenon-standard, self inflicted setup via pic and they didnt flinch at all. Remained professional the entire time, responded with info that instilled my condfidence in them to work on my car.

He recreated a sheet metal piece I needed for a vintage soda machine restoration. Quality work and…read morereasonable price.

Excellent work ! Custom kicker motor bracket is super string and looks like a work of art !read more

If you're searching for a truly talented welder, don't pass up the chance to work with Kyle Wesely…read more The only mistake you could make is not choosing him! From the start, Kyle walked me through his process and immediately impressed me with his knowledge and professionalism. Unlike past experiences where I was let down after a good sales pitch, Kyle delivered on every promise. His bid was fair, his craftsmanship exceeded my expectations, and his customer service is second to none. When I noticed an issue that I hadn't pointed out earlier--and Kyle hadn't spotted either--he was quick to return and fix it, making it even better than I hoped. I've previously used Sacramento Iron Works (their work is excellent but definitely more expensive), and I can honestly say Kyle's quality and professionalism is every bit as good.

Awesome and professional service, start to finish! Handrail created on site within days of initial…read moreinquiry. Definitely found my go to for dependable iron works projects.

Called 3 companies to get a security gate welded . Needed that day. Techs came to Woodland and got…read moreus back in business and lot secure. Will be using them again. Thank you for fast response and great welding job on our gates.

I am so pleased with the clean work . On time…read moreFair price Clean workmanship. Answered call and started work next day

I reached out to Yelp about a small project I had and Dillon was the first to respond and was very…read moreresponsive. He worked out a time that worked for me and we were able to complete the job right away. Give Dillon a call for your next project, very professional. Thanks for helping me out.

I had a unique project where I needed some welding on a fire fighting buggy I was making. I put in…read morea request on Yelp and Dillon's responded quickly. We set up a time later that week for him to come out and take a look at the project. He was able to give me a fair price and confirmed a timeline. He took all of the parts back to his shop to complete the work. He reached out a few times to confirm he was following the requirements. He returned the project on time, on budget and all of the welding was smooth, clean and solid. I will use Dillon's for any future projects like this. Thank you!

They were very helpful when I needed to find shocks for my truck and I didn't know what I was…read morereally looking for.

OMG!! Greg is a nice guy. I was referred to Greg by a past associate of his pretty much in the same…read moreline of work. When his associate, Jake, from a different business, also a nice guy, was unable to perform a small job for me, due to being out of town, I was referred to Greg and Rock and Road. Greg not only performed the small job that very day, which was a Friday, close to closing time, and Halloween as well, he did it and did it fast. This is how a business should run. Thank you Greg.

I was first contacted by Dan, whom I believe is the owner. I spoke to him and his son, Tyler, about…read moreour side gate that we wanted to have motorized so we could use the clicker to get in and out of. I was a bit skeptical at first since I was communicating only through text/email/phone/photos, but they definitely ended up delivering on their quote, exactly as promised. Tyler showed up with his crew on the day that they said they would, and they finished the job on time. From start to finish, I would say everything took about 3 full weeks. That is from my first initial phone call to the company to when the gate project was completed. They did have a cancellation and asked if I would like to be squeezed into their schedule. That may have sped things up, but I'm not complaining! Please contact this company if you are interested in obtaining a gate on your property that will outlive you! :)

Strange that I've had to update this review twice, but I had Cal Sierra back for more work and…read moreinstallation of a new operator plus moving the old one. The work was good but a year later when I had an issue, their response was that they don't do service work. I'm sorry but if you install it, you should service it. Or have someone you can contract to for the service. I wasn't asking for free service but still I couldn't get anyone to come look at it. In fairness to them, it seems to be a theme among a lot of contractors right now, but still that's no excuse.

"This company is deeply disappointing on every level. Orders are almost always late, and the…read moreproducts are made with the cheapest metals and hardware, showing a blatant disregard for quality. Roseville Precision Inc. (RPI) treats its employees with a shocking lack of respect and compassion, pushing them to their mental and emotional limits without any consideration for their well-being. It's discouraging to see a company operate this way--failing both its customers and its employees--and I cannot, in good conscience, recommend RPI to anyone."