Let's me start by saying these guys are awesome, I first met the rep at the off-road show in Pomona…read moreCa. and he was very helpful and nice guy. I wanted to grab a diff cover for my LJ but decided to wait till I trashed my original, which I did at KOH ! So today came my new cover ! Probably the thickest piece of steel on the Jeep. Can't wait to install and get back out, going to Rubicon end of June for the first time and break it in ! Thanks again RS for all the hard work that went into this part, keep up the great work ! Love buying great parts that won't fall apart and are built to last I will be buying again that's for sure, I will pass it on, like it was passed to me.

I ordered zip tie brackets, a simple part. I placed my order March 23rd, it is August 4th and I…read morehave not received them. Customer service is a joke. No reply to emails. Do not trust them to fill your order. They do take payments really fast though. I hear they make nice parts, yet to see any.

I have now had three very successful interactions with this store. The first time I came in, I…read morewanted to see and hold a telescoping Stihl pole hedge trimmer, which I had seen at Ace but couldn't hold it because it was secured by hose clamps. Auburn Saw didn't have the HLA-86 in stock when I asked but immediately offered to get one I could check out early next week. They did, I checked it out, and bought it. They explained a promotion Stihl was running which would give me $650 worth of free batteries if I chose the right purchase choices. Very helpful, knowledgeable, employees which leave me wanting to go back and buy more stuff.

I purchased a Stihl chainsaw last November. I flooded it a few times and I was always able to…read morestart it eventually. Today I couldn't get it to start at all. It had spark and new fuel. I brought it in; Tyler said it was flooded. I doubted it. He showed me the REAL hack to address it. It started on the first pull. Thanks Tyler!

From nowhere, unannounced, I arrived at Tri-C Machine's doorstep as my Arcimoto FUV fender brackets…read morehad failed and needed expert services. Tri-C Machine did not turn me away, but rather was interested to know more. Jim and Steve of Tri-C provided a bespoke solution by fabricating a custom fix for my broken fender bracket. My Arcimoto FUV is back on the road and has never performed better. -- Thank you Jim & Steve

I guarantee you don't get what you pay for I had to Rams built actually three the first one is fine…read morethey put a harden shaft in as I requested. The next two they built for me we're supposed to be the same hard and shaft in the same type ram and neither of them were hardened they That bent with very little use he said they would not bend but we're so hard they would have to break. Well they bent in about hour of light use. I feel ripped off. Possibility of going to court. was very litt Den Almost $2000 for junk im worried that if I use the one that I just picked up its going to be the same junk. I ordered a new one online from magister hydraulic supposed to be 14k capable only running 3k for 1/4 the price k

Great capabilities and service. I had some stock laster cut for a project of mine. Appreciate…read moretheir attention to detail and rates.

I contacted FIVE fabrication shops before Van Dyke to get what I thought was a simple job. I just…read moreneeded a support cross beam for a desk cut open to mount rails under. Got a response from 1 with an outrageous quote almost disrespectful. One never followed up even after confirming on the phone they received it (It's been 3 weeks already). The others just never responded. It wasn't until I called Microform which they ALSO ignored my quote request and the representative couldn't even find my quote email (I assume they even deleted it). I was then referred by the representative to Van Dyke Fabrication who is able to do both personal and business jobs. I look them up and realize they are a good distance away from me about 35 minutes. I was shopping locally but I realized at this point why not. Well, I'm thankful for the referral because this fabrication shop is not just good, IT'S QUALITY. I was able to finally get this crossbeam fiasco done after searching for a shop for an entire MONTH. When I originally called, Barbara directed me to email John with a quote request and I was able to drop it off the same day! John even stayed extra to see the part, just to clear up what I needed exactly (He already started the day very early too). John exceeded what I expected! He told me he would have to cut the cross beam by hand with a plasma cutter since it wouldn't fit in the machines due to it's shape, which I was completely happy with since I just needed it cut open. However, when I went to pick up the part, it was replicated ENTIRELY with my request since it was easier than cutting it. Matched and fit just like the old part with improved mounting holes for more tolerance, HOLY SMOKES. This was such a nice gesture of him, it's hard to find honest businesses like this these days.

This review is based on personality, not actual jobs performed. This guy, Jake, is one nice guy…read more When I contacted him about a small job, unfortunately he had to inform me that he was out of town for 3 weeks. Jake did not just say "I can't do it", but rather hooked me up with info of a past associate who could possibly do the job that same day. What a nice guy and, in fact, the other guy, Greg, from a different business, was a nice guy too, but that's a different review. Thank you Jake. I wish all businesses were run this way for people, not just profit.

Excellent service, Jake helped us cut steel parts to the correct size, very quick response time, we…read morereally appreciate it

I've been a customer here for about seven or so years - everytime I receive knowledgeable, fast…read moreservice! I took my Dyson stick vac in today which was clogged and I had put the filter back in incorrectly - no problem, Alex fixed it on the spot and showed me how to avoid this from happening in the future. We're lucky to have such a high integrity, customer service driven business right here in Auburn. Thank you Alex and Auburn Sew & Vac!

The only place I know of to clean my favorite old vacuums and order parts. I drive over a half hour…read moreto get to it but I trust them to meet my needs.

Been buying from them for 30 years...simply fantastic!!! Recently Isaiah installed 3 new screws on…read moremy Weedeater that had backed out. In and out in under 5 minutes and no charge. Amazing. Thank you Alta Saw and Isaiah. Another very happy customer.

I recently brought in my Stehl chain saw after it stopped working. Tang who has helped me in the…read morepast quickly inspected it and determined a chock clip had worked itself loose. In ten minutes Tang fixed the chainsaw and without charge! I then asked about a chain sharpener. He told me about the Stehl brand but also the no name one which was less expensive. Tang didn't try upselling me. He once again saved me money! Alta Saw and Tang are honest and trustworthy! I highly recommend them both for your chainsaw and small engine repairs!

We called C&C Appliance when our Bosch dishwasher had an issue. As it was only about 6 years old,…read morewe wanted to see what it would cost us to fix rather than buy a new one. Christian came out and troubleshoot the issue. The dishwasher had the error code E07 and E15. While it took 2 other trips to fix it, Christian stayed with the issue and figured out the issue. Poor guy was on hold for a very long time with Bosch. It turned out it was a known issue with Bosch of this particular part that breaks. It is now fixed and I highly recommend C&C Appliance. Love the fact, they are locally owned and very reliable. Christian checked back with us to see if everything was working out fine.

Response time was excellent and so was the service. The pricing was competitive. I can recommend…read morethis business.