I had just bought a used dirt bike for a friend. The heat shield was broken off the pipe. I took a…read morechance and called them.....they were super cool. they said swing in and we will take care of it. They did a great job even painted the welds so it would not rust. I asked how much and they said how about a couple of hamburger lunches.....I handed them $40.00 and was off all in less than a half hour. Use these guys they are great.

After traveling for 8 years and having our truck and camper in every state and almost all of Canada…read moreit broke down in Gilroy California. The left frame rail cracked and broke at the rear shackle and the right frame showed it wasn't far behind. Dustin at Dela's welding came to my rescue! Inspected it in a campsite, gave me a an estimate of costs and scheduled me in for repairs. He straightened the left rail, terminated the cracks, plated and welded the plate to the rail. Right rail he terminated the cracking and welded the crack. Job was done on time and under the estimated cost. Very professional! I would highly recommend Dela's!

I had a pretty quick job of welding a hitch adapter onto a tractor drawbar. Called around every…read moreplace in the area and the quotes I got were pretty ridiculous. Finally, I reached Jesse and he quoted me a very reasonable price. The very next day, he was in the area for another job and stopped by my place. He was very polite and professional, and the weld job looks great. He did not cut any corners. He very thoroughly cleaned both parts and the 360 weld looks very clean. Two thumbs up -- highly recommend him.

This guy is a true gentleman and professional. Saved my family on the freeway from a breakdown on a…read moreSunday, while he was busy with his family. Had a shackle break on my RV and he was there within minutes to weld it back on. He's so nice and knows his profession very well. Thanks, Jesse!

John's attention to detail is A++. He loves what he does and it shows in his passion and quality…read morecraftsmanship. I look forward to the next project. Thanks again..parts fit perfectly..and appreciate the quick turnaround!

They lost the parts basically…read more So I own an old overland Japanese classic van and I needed to have two plates tapped for PSI and Temp sensors to view the metrics on a gauge. I go in to ask one of the workers Pierre if he was able to do the work. I can understand a business can be busy and can't get to them but the time span to drill two holes was 3 weeks going on 4. So the first week they've had them nothing was done because I get it "they're busy". Next week I come to check the plates are too hard which I've been telling them because it's made of spring steel. That's fine they said they'd have them annealed and then drilled and tapped. I follow up the following Thursday of week 2. John pulls me outside to tell me literally the same thing or they have an engineer coming in to remake the plates in a softer material. I just needed to message him what operating temps the plates need to be at. Then he told me to follow up on Monday. Okay sounds like a plan right? No. I follow up on Monday over the phone and he says "they need to be annealed" Right exactly what you've been telling me I get that! He says "we'll get to it tomorrow". Okay I wait a day because it sounds reasonable that he'd get to them. The following day after I come in because at this point if it's not done then I want the plates back because I'm done waiting on someone who's never going to get around to it. I come to see john and he says he can't fine the plates! I've previously told John that these plates have been with machine shops for 3 weeks and now it's been with John for 3 weeks going on 4 and now they're lost. I know this is not the intended outcome for both parties but you can see my frustration. I've never been contacted from him about the plates it's always been just me reaching out to check the status. Losing them was the last of my patience I just ordered a new set.

Jerry did a great job taking my rough plan and bringing it to life. 1/8" steel diamond plate with a…read more7' brake, notch and 1/2 holes. Cleaned it up with acetone and scotch brite pad. Primer and brown paint to finish. Thanks Jerry.

I am very disappointed in Jerry and would definitely not recommend his services. I called a few…read moredays go and asked him to quote me for a small welding job. I spent time taking and sending pictures and details. He explained that he charges per hour and that it would be about $80 which I thought was very reasonable. He said to stop by anytime and he will take care of it. When I called him back a couple days later, he explained that he was very busy all of a sudden and that he would not have any time soon to help me. I even asked if any time in the next couple weeks will work for him but his schedule is apparently full......period. I guess my small project didn't matter enough for him to follow through with his word. I always try to support our local businesses first, unfortunately not this one again :(

Long/short story but we had to replace our slide in range , measured appropriately and purchased…read more. issue was the incoming range didn't have a lip around the edge ( as did the old one) and the person who cut the countertop originally must have had the wobbles so it looked just awful awful. I tried a few remedies from Amazon that were frankly crap so took a run down to RCR to see if they could help... One week later I am the proud owner of a one piece brushed stainless steel surround and it looks great.. small job but meant a lot.. only issue was my written measurements were misinterpreted (scribbled like a caveman) but they rectified it on the spot which was cool. Thanks RCR, highly recommended and will use them again when I have an excuse...

I was looking for very specific signage for a project. I needed metal (steel) and artistic…read moreaptitude. They offer Water Jet cutting services with a keen eye for detail. Melissa mans the helm of the office, she guided me to what I would need for my project, time frame and cost estimate. Nice local find. These guys are complete professionals with the ability to do small to large jobs. Metal sculpture gracing the yard offers fine examples of past work.

I needed an acrylic house but had no plans, no design. I described what I wanted to Gary who…read moreunderstood exactly what I was hoping for, made a quick sketch, calculated the materials and cost in ... maybe 5 minutes, and said it could be ready in three days. I was expecting it to cost more and take much longer! Imagine my surprise when he called the next day to say it was ready! And then whenever I picked it up there were so many lovely details -- a chimney with bricks etched in and tiles etched in the roof! I was blown away. This is exactly what I needed and more! Thank you, Gary!

Nice guy. Good prices fast turn around. Need I say more? I think that all anyone needs. Hire…read moreGary for your job

William could not have been more patient, informative, kind, honest and just a damn nice guy. I'm…read morea total layperson trying to fix some fencing and he was SO SO SO nice about explaining options, giving recommendations, offering links to better understand and then referring me to a store that offered what would meet my needs to save ME money (while NOT putting it in his pocket at a markup). Integrity and honesty matter - heck I was ASKING him to buy from him to thank him for his time - he EARNED it. I value honesty and principle - William showed TONS of it. Can't say enough about how great an impression he made and what EXCEPTIONAL service he provided. REALLY pleased to have run across his path.

I had a stained glass table lamp fall from the top of an upright piano and the metal finial and the…read moreopening at the top of the shade split apart. William was able to do a fine job of repairing both of the damaged parts, rendering my beautiful lamp functional again. The price was reasonable and he completed it in 2 days. He was very concerned that the repair looked well done, and not just fixed, which I really appreciated.

Harley and Jim are very knowledgeable and the best metal fabricators in the business. Always fair…read moreprices.

Highly recommended. Always reliable and reasonably priced. Jim and Harley have done numerous jobs…read morefor me over the years. Support beam assemblies, brackets, a gate, and complex metal stairs with on-site installation. Dietrich is OK, but seems pricey. For sheet metal Wilson can do most anything you need - also pricey, but high quality.