Outstanding. Dan is the man! Dan is the NAVICO GURUE! He has helped me several times. He's…read moreusually pretty booked up and even his competitors will at times say "call Dan, he's the they guy". And sure enough if I can get in on his schedule he solves my electronics issue every time. Instead of "that guy" you hire cause his schedule is wide open. There is a reason for that. You can't go wrong with Dan!

Dan is the man! I…read morepurchased my boat late 2018 and immediately went to work trying to replace components that were either outdated or not functioning. However, the process of finding good companies or people willing to discuss, meet and show-up to do the work became the most challenging part of the entire ordeal and left me extremely frustrated at times. Luckily, I found a good one in Dan @ Seabound. He is a consummate professional. Keeps his word, shows up on time, answers questions from novice boaters like me. He is also very fair with his time/pricing. I've never once grumbled about one of his invoices unlike others where the hours charged seemed inflated or the work was half-assed. Overall, Dan has taken care of ALL of my electronics needs (Simrad Certified) replacing my MFDs, Transducer, Radio, Antennas, Autopilot, Fishfinder, Radar, light fixtures, wiring issues etc. you name it, Dan will track it down and make it work better than you can imagine. All of his install work was top notch and clean. (No loose wires, no jagged cuts etc. see my pics for examples) I am very happy to have found Dan and would highly recommend him to anyone looking for a honest, dependable and FRIENDLY marine installation professional.

I am so grateful to have gotten my 42 foot Catalina worked on by Morton Marine. Ken was always a…read morephone call away, very patient, professional, honest, and easy to communicate with. His knowledge about boats and issues made it simple to figure out what needed to be done in order to fix the problems I was having. The boat was having vibration issues and I was unable to rev the rpms which made it impossible for the boat to reach a normal speeds. After hauling out and pulling the shaft we needed to get a new shaft made, new prop, and just a full overhaul. I put all my trust in him and his team and ended up with better results than I could even imagine. It's like a new boat, I'm so happy. I was terrified of the final price at first but it was very fare. That's rare. Thank you Ken, Stan, Cole, and Luke. See you soon. Captain Liz Owner of Sterling Sails

I had a very positive experience with Morton Marine Services. Initially, I was…read moreunclear about various businesses working together with Safe Harbor Marine, where I was hauling out my 33 foot sloop for bottom cleaning and painting. I advised them that I wanted two seacocks inspected and possibly replaced, as well as repacking of both the prop shaft and rudder post. Upon haulout, I was directed across the yard to Morton Marine for those engineering issues, as Safe Harbor was only handling the bottom exterior of the boat. Upon arrival, I met with Stan, who was aware of the work I had requested, and came with me to size up what was needed before the boat even left the water. He clearly understood my concerns and described a plan of action. He was certain the work would be completed within the 4 days Safe Harbor was allowing for the bottom job. Before I went home on day one, the boat was hauled and on jackstands. I was absent for day 2, but they must have hit the ground running as most of my work items were handled then. On the morning of day 3, I was back to the yard to check on progress, and found the Morton Marine employee Vadim just finishing the rudder post packing. Everything I'd asked for was done and the yard was planning for launching soon. He then told me that they had observed pin hole leaks of water from my engine exhaust hose that was next to the rudder post. I knew the hose was old, but was surprised that it was worn to the point of failure, allowing exhaust gasses into the interior of the boat, a very dangerous situation. Of course I directed that it be replaced, which was possible pierside after launching. This called for removal of a decorative panel covering a wooden box thru-way for the hose to rise vertically upward a few feet above the waterline to prevent vacuum siphoning of seawater into the engine. At this point Ken Morton (owner and ops boss) arrived and personally assisted in panel removal to ensure it was not damaged. Mine must've been the smallest job in the yard, but the attention I was getting was amazing. We then found very rusted and disintegrating stainless tubing at the top of the hose loop. Ken said he would try to find a replacement, but it might have to be fabricated (very expensive). I was resigned to the cash outlay since this was a serious safety hazard, but the next morning Ken called to advise that Stan had reminded him that a far less expensive fiberglass loop was available. Five hours later, everything was done, including Stan adjusting the prop packing gland for a proper drip rate with shaft turning ahead and astern pierside. The worksite (my galley, head, and aft cabin) was wiped down and vacuumed. Everything Vadim and Stan worked on was clean and meticulously done to the highest standards. I am very grateful to Vadim, and Stan, and Ken for their superb work and attention to a major safety issue I had missed. These are the guys I will return to for boat servicing in the future, and I wholeheartedly recommend them to anyone needing engineering work on their boat in the San Diego area.

I shopped around for a yard to do some fiberglass work on my whaler and I'm very glad a chose Safe…read moreHarbor. Scott and Trip were amazing from start to finish. Not only did they do an amazing job on the repair but they were very communicative and personable the whole way through. My trailer jack gave out while they were working on the boat and Trip (a manager) went out of his way to personally go buy a replacement for no additional cost to me. These guys are top notch, honest, and fair. They definitely take care of their customers. Would go to them again in a heartbeat!

We frequently use Safe Harbor Shelter Island for our boat repair and maintenance needs. They are…read moreorganized, Scott does an amazing job of managing the yard, and it's easy to find a vendor there. Keep up the great work!

I should have looked at the reviews, I asked them to look at my boat…read more When they sent me a bill for a couple hundred bucks I was a little surprised, but when I called to ask them if they could actually send me the "survey" they were immediately agitated? More than a week later I called again, but that really pissed him off... I did get my survey... However I won't be spending any more money with these people.

I recommend Custom Marine Electronics who recently installed radar and a fuel data manager and a…read morefull NEMA network on my boat. The level of work was actually beyond my hopes and expectations. The work was clean and everything performs perfectly. Todd stands out in particular. He's the technician who did the work and his knowledge and professionalism are really beyond what you normally encounter. I don't think I'll trust my boat to any other electronics outfit. These guys did not just great work, but exceptionally great work. They turned my Boston Whaler into the boat of my dreams. Wow! It's now much better than it was coming out of the factory. I'm super pleased.

David and Robin of In-Phase Marine Electronics were great to work with. At every step of the way…read morethey were professional, timely, and courteous. They did a great job on the upgrade and installation of new navigation equipment on my 2003 Catalina 36. In addition to this, David worked diligently to troubleshoot and solve a pesky electrical issue I had been having on the boat. I couldn't be happier with the service, quality of work, and value provided by In-Phase, and would highly recommend their services to anyone.

I had worked with David a few years ago while commissioning a new electronics system on my boat and…read morehad a very good experience. When I was looking to upgrade my batteries to Lithium I once again contacted David. He worked very closely with me to design a system that was safe, efficient and met out cruising needs. He went out of his way to work closely with Victron to develop the system. He was punctual, reliable and kept us updated every step of the way. After our system was installed, he made a huge effort to go out on our boat with us to ensure everything worked in the real world. David and Robin are great people and an absolute pleasure to work with. I highly recommend them for marine electrical and electronics.

Just want to say thank you. Between drive thru boat drop…read morewhich was awesome and just great communication and great work to repair drive cable and drive box issue on Caravelle with Volvo Penta 5.0. I am not easily impressed with customer service these days as nobody seems to care. These guys know what they are doing and I can't say enough on what a positive experience this was. My first time to Sunset Marine and totally impressed. Thank you again.

We had such a great experience bringing our old Sea Ray ski boat into Sunset Marine! Sam is great!…read moreHe was patient and took the time to explain things to us and answer all our many questions. Finn was the one who ultimately worked on our boat and he was very nice over the phone, making sure I understood everything before proceeding with service. I highly recommend Sunset Marine.

Boat Repair is a challenge. As an owner, I want to spend the smallest and amount possible. But,…read morereality doesn't always match. We have brought our boat to affordable and Dennis many times over the years. Their impeccable service, communication and quality are rare in this industry. I would highly recommend affordable for anybody who's interested in great communication, fair prices, and high quality work.

Very rude and bad customer service. Dennis and laura have a stuck up " i don't care" attitude ,…read moresave your money and your self a headache and go somewhere else.

This review should be Zero stars for FWM but they did convince me to spend a lot of money and for…read moreawhile I believed they had my best interests in mind. That was my biggest mistake. The main proprietor, Gary, seems extremely knowledgeable but it doesn't matter if he's not doing the job and there is no Quality Assurance of the work performed. Each time I received my boat back from FWM, it was a mess with oil and fluids everywhere and additional problems to follow shortly after. I repeatedly tried to trust this outfit but it was in vain. Before you use FWM, ask who is doing the work and how they will ensure quality control of the work they do. A technician sent alone to my vessel was a fluid tech from automotive field with little knowledge of the boat he was working on. Service writer is extremely nice and friendly but also a transplant from automotive. Business partner is a hot head and was incapable of reinstalling a sea water impeller which I had to do for them while they present and were being paid to work on my vessel. After performing two major services to my vessel, requiring haul-out and lengthy down-time, FWM failed to properly secure an exhaust bypass hose connected to a through-hull and the result was an engine room filled with diesel exhaust that shut off power the the turbo and rendered my vessel nearly limp in open seas under rough conditions. The culprit was two hose clamps left open after their removal of transmission for a service that may have caused additional and larger issues. The soot alone coated every inch of the engine room and ruined the fresh air intakes for two engines. Leaving the boat a mess after service is bad enough. Having additional mechanical issues on the same component after two very expensive and connected repairs is extremely coincidental. But, creating potentially catastrophic damage to a vessel off-shore and underway is negligence and should be criminal. Instead of taking any responsibility, Gary will defend this by pointing out how I lost my cool when they reported a completely damaged outrigger through saying, "I'm sure you know about this already" and then telling me "it's not our responsibility to give you the name of the person that told us". Or how I was upset when I received a lecture on "Industry Standards" after I alerted them that the tech should not start the engines without opening the raw water intakes first. I'm sure FWM feels they did the best for me. That is the scary part. They feel righteous about their work. Rather, they failed each time to even clean up after themselves, left bolts out when doing reassembly, damaged in-tact hoses during reassembly causing leaks, and failed to secure a critical exhaust hose leading to multiple issues and eventually causing a major cleanup job and replacement of expensive components. Each time FWM has defended themselves instead of doing the job right or at least providing a customer with proper info an opportunity to ask if the issues were related. Yet, still I paid and paid and even wanted them to come back and finish the job. Why? Because they were to my knowledge at the time, the only show in town and also because I believed they would make it right. Boy was I wrong. Part, service writers, and techs are not to blame here. This review lies squarely on the owners. They present a heck of a front and even take the time to write lengthly dissertations on their work but they don't follow through, check the work conducted by their junior technicians, or stand behind their mistakes. Worst experience about boating in 20+ years on the water. I have built and maintained relationships with all of FWM's surrounding vendors for years and thought this was to be the same. Instead, this experience makes me sure I will never own a vessel with similar components requiring me to work with this group again.

Have used these folks for over 10 years no complaints. Recently put in a battery charger which was…read moredefective. Replaced it with a more expensive one at no charge. They also make house calls!!