The rental of the machine and trailer was very good. From getting the appointment setup to…read morechecking in and getting everything hooked to my truck was professional and expedient. The return also went smoothly and was hassle free. I would recommend this rental service to anyone who wants good equipment and quick service.

I rented a trencher from K&K and everything worked as expected. The guys who helped me load it on…read moremy truck even took a minute to show me how it works! Great experience overall.

I took in my pressure washed that had died. The owner met me, gave me a fair estimate and said it…read morewould be ready in a couple of days. Called me the next morning and it was ready. Great service and price.

Super quick service! I got my mower back the same day and was happy with the serviceread more

Booms Welding are a great team who were a big help - Joel the owner, with Stephen and Brandon…read more We had an upright pellet smoker that needed repair and they fixed it up so well that we can't even see the repair... BUT we know that what did not work now does work! Thank you, Booms Welding!!! - - - We ordered a pellet smoker and the first one that was delivered was clearly damaged, seemingly before it was put in the box at the factory; the manufacturer sent us a replacement, and since the first one was too big to send back, they let us keep it. The smoker is upright, similar to a dorm or hotel refrigerator (but bigger), and the damage made it out-of-square... it was tilted just a bit, and that bit was just enough to prevent the shelves from being supported on all four corners... if we were to use it and to put meat on it to cook, a sizable amount would have made the shelf tilt and fall. We had met Joel before, searching for help on another home project; Joel was very friendly and helpful; while the part we needed repaired couldn't be repaired (we ultimately found an unexpected replacement...), Joel was straightforward... he clearly understood our ask and shared why he wanted to help but just couldn't. That impressed us. So when we needed the smoker repaired, we called Joel. He came to visit and to determine what to do; Joel suspected that welding a couple metal pieces inside the smoker would provide the support that the shelves needed. We just needed to get the smoker to their shop and their welding equipment. We took the smoker to Booms and dropped it off. Within an hour they had it repaired... they were able to straighten the frame and to then make two welds to hold it in the straightened position. The repair was done so well and so professionally that, when they showed us the two welds, which they painted, in the bright outside sunshine, we could barely the repairs... the smoker, with the welds, looked like brand new. And thus we had a smoker to share with a friend. Thank you, Joel, Stephen and Brandon!! - - - - - -

I've been waiting on a few dominos to fall in order to start the permit process to install some…read moreracks in my warehouse, and one of the later dominos that needed to drop was getting some cross bars cut down to size. Due to some dates being pushed up, I needed those bars to be cut down sooner rather than later. I emailed info@booms and had a response within the hour. They asked me if I wanted to bring the bars in or have them pick-up; I chose to deliver them directly to Booms and the gentlemen I spoke with said he should have them done by the end of the day. He notified me later that afternoon that they were done. I just picked the bars up and they look amazing. Exactly what I needed, just as specified. I am very pleased with the work performed by Booms. If you are looking for a professional, local, reliable, and quality metal fabricator - I would highly suggest Booms. I've already mentioned to Booms that I will be in contact about some future projects.

We just had patio furniture redone. Not only does it look wonderful, the whole process was a great…read moreexperience. The service was super! Tanner picked up and delivered the furniture with a smile. He was great.

I used this company two years ago (2024) to sandblast and repaint our Woodard Briarwood patio…read morefurniture that we purchased in 1984. It looked brand new when the job was completed. It has been on the deck for two years year-round and still looks brand new. This furniture can still be purchased but is not as heavy as the 1984 product. Could not be happier with the work and how the furniture has held up.

I have been going Vince Jacks off and on 10yrs, I've also recycled at 6 other scrape dealers,…read moreVince Jack's is the best PERIOD, In nonferrous metal ( what will not stick to a magnet, copper, brass, aluminum, lead etc.) Hands down the best prices, staff is friendly and courteous. The owner and son will share their knowledge of how to get better price by cleaning your metal of breakage and extrusions. Dollar to Doughtnut can't be beat

If I could give it zero stars, I would. I took in over 120lbs of copper and about 5 or 6 of cat5…read morecable. I was rung up to 127lbs, got the ticket and they put the entire load of copper under "communication wire". I questioned them as to why and they said I had wire nuts still on some of the wire. I loaded this copper into the car myself, and I saw not even a handful of wire nuts. I've given them loads like this for years and a few measly wire nuts were never a problem. So if you don't like to get screwed out of money, I suggest going elsewhere.

These guys are great, took awhile for them to look at my lawnmower but they told me that when I…read moredropped it off. Do wish I knew about the rental service because I probably would have taken advantage of that instead of overpaying for the neighborhood guy to do it. Happy with the service and I will use in the future for my tuneup and repair needs.

I needed a part for my Mahindra tractor, but Lawn Care Equipment was out of stock. Darrick in the…read moreparts department went out of his way to send me info of the nearest dealers that actually had the part in stock. I was able to get the part ordered with one of those on his list. In my opinion, Darrick didn't have to do that, but he knew I'd be waiting a long time to get the part from Mahindra. I appreciate that he did that, as I needed to get my tractor back up and running sooner than later.

was charged $100 dolllars and the lawnmower performed worse after picking up, customer service was…read moreTERRIBLE

I was sold a self propel mower for $280 that was fit to use for the season, just bring back for a…read moretuneup before storage. It started to eat the drive belts two months into owning it and I sent it in for repair. They said "your belt is shot", and going to cost $250 to fix. When I went to collect my now very heavy push mower I was told they don't really "do" self propel. My FIL is looking at it now and found that the oil wasn't changed before it was sold, and there's a nut caulked to the deck being used as a spacer, which is likely what caused the arm resting on it to break. I don't think they did that, but I'm sure they knew when they tuned it up that it was like that. I won't be back.

I've bought countless appliances from Lemcke in the last 40 years for home, business, 2nd home etc…read more Always the best price and great service. Only one time was delivery and set up not up to par but they remedied it very quickly.

I am a Very Grown Up short lady. I was looking for a top…read moreloading agitator washer. I browsed top loading agitator washers a few days ago at another store. Salesperson commented that I was short so maybe top loading wasn't the best idea. I opened several washers; my hand was several inches from the bottom of the tub. OMG Went to Lemke's thinking the only answer was a pricey washer/dryer combo. When I told John about my dilemma, he said "try this" and tapped a GE top load agitator washer. I could reach the bottom! Yay!! i used Lemke a few years ago for kitchen appliances. Delivery was painless and easy.