I called around for estimates on media blasting/ powder coating of a couple sets of park bench ends…read more(cast iron). Armur had the lowest phone estimate and the actual price was lower (when was the last time that happened?). Turn-around time was a day (yep, 24 hours). The final product looks great - a massive improvement over the ten layers of old paint and exposed rusting metal. I wouldn't hesitate to do business with them again.

Good price and good work. They did a great job sand blasting and powder coating some old iron patio…read morefurniture for me. It looks great.

I've been going to Karam for over 2 years. They've done pallets of valves with Cerakote, and metal…read morebrackets with Powder Coat. I've always received great quality, and feels like a good value. Highly recommend.

UPDATE- The reply to my review by Karam Concepts is a complete lie. In fact, they were the ones…read morethat suggested the finish, not me!

Its to bad their service wasn't as good as the work they do. Drop off small parts and have to wait…read more6 to 8 weeks for return, though you can see BIG truck frames coming in and being completed and my parts sit there. Not sure how this man stays in business

From the owner: Custom Powderworks provides custom powder coating and hard-surface finishing for metallic surfaces…read moreand ceramic coating for a variety of surfaces, both functional and ornamental.

I contacted Bully Coat through Yelp and the response was almost immediate. I had them powder coat a…read morepair of motorcycle brake calipers. They quoted me a week and it was exactly that. I same very pleased with the results. As you can see the photos tell you everything you need to know. The color is a two stage process and it's called Lollipop Red. I love it!

From the owner: We are a Veteran and Family owned business dedicated to bringing you the highest quality and…read moreservice in Powder Coating

I took my parts to CEI on December 3. I was provided a quote in the amount of. $1,820.00 and told…read morethe parts were estimated to be ready by the end of the year, December 31, 2020. On 01/20/2021, having surpassed the estimated completion date by nearly double I asked for a firm completion date. Solomon all but actually stated my job kept being bumped for more lucrative jobs, "competing priorities" I think it's how he put it. I showed up on 01/27, as told, to get my parts at 3:50 pm & no one in the facility knew what I was talking about. We found my order, still on the racks, not wrapped and in no way ready for transport. I immediately emailed Solomon at CEI/VP and shared my concerns. The response I received stated: your parts are in final quality review, would you like the parts done on time or correctly? Well, color me a fool, but both really!! Is that odd? Would receiving your steak dinner two hours after ordering be upsetting, even if it was done right? I suggested an adjustment to the bill was in order for the repeated failures on the part of CEI/VP. CEI/VP agreed and re-developed the price quote by more than double from $1800.00 to $3,514.96! NO JOKE, AFTER COMPLAINING AND ASKING FOR AN ADJUSTMENT THEY AGREED BY INCREASING THE AMOUNT DUE!!! CEI/VP then reduced the price to $2,070 for a net increase of 250.00 after I voiced my complaint. But it gets better! I finally get my parts home. And begin unwrapping and inspecting them. Remember above when Ariel asked if I wanted the parts done on time or correctly? Haha! Wrong on both accounts!!! I get back to the house, unwrap the parts and neither the front nor rear fender has any paint, primer or coating on the underside, just bare raw metal!!! Neither done on time, nor correctly, or even within budget! This makes me really laugh at the email when they speak to going through final quality review! By whom? A blind man with no hands? I called and spoke with Solomon. He claims motorcycles don't come from the factory painted on the underside, they use an "undercoating". Interesting because I personally took this fenders down to bare metal myself, and they were painted. Further, while I can see why an undercoating vs. paint may make sense on some applications, my front fender floats above the front tire, with four bolts afixing it to the forks. When you look through the forks you see the underside of the fender mounting tabs which are an ugly matt black rather than professional looking paint. Even better however, is when I return to pick up the fenders you can actually and quite literally see metal through the thin veneer they sprayed over it, nor did they tape it, so there is a pronounced, uneven and unfinished look to them now. I have a lot more parts to get powder coated. Imagine the difference in review had Solomon simply apologized and offered me 10-15% off my next job? I'd have been happy, I'd have returned with more work and I would have shared my positive experience with my extensive network of friends, family and aquaintances. As a result CEI/VP would have made more money. Instead, CEI/VP would rather hold my parts hostage for more than the agreed upon price after double the reported completion time with the work being poorly and incorrectly done. I am utterly convinced your experience will be the same should you choose to use this company, but don't say no one warned you...

My 2016 Surveyor travel trailer had the paint fade on the front cap within 2 years. I was expecting…read morerepairs to be very expensive. It was not!! Plus I got to do a little something different on the front to make it my own. No reason to advertise for a trailer company that can't make their paint last more then 2 years. Cutting Edge Illusions made my trailer look great again for far less that I thought it was going to be. It only took them a week to have it back to me too. I recommend!!!

I had these guys do 2 sets of wheels for my drift car and they turned out amazing! Seriously better…read morethan any factory finish I've seen. What I really like about SPC is they walk you through the whole process and I could tell they have a passion for what they are doing. Prices are better than other places in the area, I recommend to all my drift friends.

I had a set of wheels done for my car and the place that did it isn't in business anymore so I got…read moreahold of Santiam Powder Coating and a couple others to get quotes for the wheels I bought for my wife's CRV, Santiam was the least expensive and his customer service was great. The wheels were turned quickly and were exactly what my wife wanted, we will be going back there for any future powder coating needs without a doubt.

The project took quite awhile but was well worth the wait. Michael, the owner, is very honest and…read morevery busy. I am so pleased with the outcome of my custom designed gate. I told him I wanted dolphins and then we co-created the design together. He was a good listener and included all of my requests. I love my gate!!!

Great products great service Great people. On time service…read morehigh quality. All seniors with stairs need handrail by ASF.