I came across this Fab/race shop when I was searching for someone to build my C10 a harness bar…read more Jaime was very friendly and welcoming when I arrived. He took the time to give me a tour of the shop and show me some of the vehicles and projects he was working on. I must say, the caliper and quality of work that is done out of this shop is amazing. I had a pretty straight forward vision of what I wanted to be built for my C10. Jaime took the time to find out exactly what I wanted and EXECUTED MY VISION PERFECTLY. The final work was perfect and we'll executed. The welds and bends on the harness bar were beautiful and fit my application amazingly. If you need any kind of fab work done, this is the shop to go to. I definitely will be referring my friends and family to this shop for their projects.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

I had a plumbing bar that was your typical material, brass, coated with nickle or zinc etc to give…read morea stainless finish, as most plumbing finishes are. I mention this as the handle was about 0.325 inches diameter solid soft brass. It was too long and I needed it shorter. Instead of using a hack saw to cut and sand it myself, I thought to take it to a place that has things setup, the stuff in place, and he can easily cut it. I found him in the business center while I was having somee other work done by another shop. Terry charged me $60 for that 1 cut. Something anyone could have done in about 5-15 minutes, without the setup!. He said, well its hard to get everything right, bla, bla, bla , when I asked why such a high price. His answers were unfounded. Its not like he coated the brass with SS finish, lol. Years later I needed a number of large thick walled posts cut down from 12ft to a shorter length. I made sure not to bother with JayTech. I found a shop on Plummer, off of Desoto and they took these heavy steel posts about 5" in diameter and made the cuts for the same price on 3 pieces of what this guy changed me on a single, less than half inch soft metal. Clean, nice work. I am sure JayTech does decent work, but is as decent a BS ripoff. If he didn't want to do it, or he doesn't deal with cutting, etc he could have just said so, or direct me to someplace that does cut, etc. I have worked around such fabrication shops, and to this day , I wont forget what a rip-off this guy was for him to take advantage. Its not the $ per-say, its the way he went about it. He withheld any idea of what it would cost when I asked before hand, and then did the work, and wanted $60. ...lol...funny now.

My beloved three-year-old ebike suffered a stress fracture at the seat tube weld beneath the clamp…read moreand if not for Jaytech I'd still be mourning its untimely demise. Thanks to Terry T. at Jaytech she rides again. He repaired the crack and was thorough enough to notice the interior of the seat tubing was wider than at the mouth and recommended the addition of stabilizing screws to prevent future movement that would ultimately stress the new weld and break it again. The additional work and bare aluminum gives her a bit of a "Frankenbike" vibe , but I'm digging it. They're like a survivor's badges of honor.

Really Good Guy. Very reasonable price considering the…read moreunbelievable job they did Polishing this. The picture really doesn't do it justice.

Vidal is the best great work and a fair price!! He is my go to polisher!…read moreyou wont be disappointed.

Mitch came out to meet with me to discuss my 35 yr. old gutters. I liked him for the moment we…read moremet! He was very friendly, honest and professional. The day before Mitch came out, we had a tree removed, which was close to the house, and with leaves that caused the gutters to clog and finally pull away from the 2nd story fascia. I thought that the quote I received to remove the hanging gutters and replace them was fair. I authorized the work to be done that day. The crew showed-up at the appointed time, and completed the project exactly as I wanted! The entire team at Socal Sheet Metal were easy to work with, accommodating, knowledgeable, and experienced. I appreciated how easy it was to work with them to get this project completed and my house back to normal, and ready for any future weather conditions. I highly recommend Socal Sheet Metal! Very satisfied!!

We met with Mitch from Socal Sheet Metal for a gutter replacement with multiple new downspouts…read more Initially, the experience was very positive. Mitch was pleasant, informative, and easy to communicate with. He walked the house thoroughly, answered all of our questions, and provided recommendations. He also gave us a verbal quote and said he would send a detailed cost breakdown shortly. Unfortunately, that never happened. The next day, I followed up via text requesting the estimate and only received a emoji in response. After two more days with no estimate, I called and spoke with Mitch directly. He apologized and said he would send it out. It has now been over a week, and we still have not received anything. We genuinely wanted to move forward with the project, but the lack of follow-through made that impossible. It's disappointing that something as simple as providing a written estimate couldn't be completed. It also raises concerns about what would happen if an installation needed follow-up or if there were issues after the work was done. Very odd experience overall. Great first impression, but unfortunately the communication and reliability just weren't there.

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

They are very reliable and quick. Had cracks on wheels and were able to help right there and then…read more Would def recommend

Did an amazing job! Ron came out, I explained what we wanted, he took some measurements, and sent…read moreus CAD drawings for approval. He created EXACTLY what we wanted. The crew did a great job on the install and took the time to do it right. Beautiful quality and craftsmanship.

Use this company for a quality job! Ron @ Metal innovations is an excellent design specialist and…read moretheir workmanship is outstanding.

Wonderful people to work with. Love supporting a family business. Appreciated the prompt…read morecommunication during all aspects of the job. From estimate to install, everything was smooth and easy. Gate looks great. 100% recommend this company.

Excellent experience working with Duncan Welding. From beginning to end, David and Kelsey were…read morehelpful and professional. We had a combo replacement and repair fence job and David's work is beautiful, with amazing attention to detail. He's a great craftsman. Do not hesitate.

Had a crack on my wheel and they were able to fix it the same day as other shops said it will take…read morea day if not more

My car was making a Ticking sounds in two different locations. It happened when I would turn on the…read morecar, turn or switch the AC/ Heater, while driving, and even if I looked at my car! I went here and spoke to Marshall (owner) about the problem. He was so professional and knowledgeable!! He fixed my car right away and gave me a great price for the new parts!! If I would've gone somewhere else I would've been charged a lot more and probably created a new problem. So happy I came here! My car is working perfectly now! 2013 Chevy Impala