I would like to thank Mason and his team for fabricating a fireplace grate for our cabin. This…read morething is built like a tank! Their craftsmanship was outstanding! They were so accommodating and helpful and went above and beyond in the construction. I highly recommend!

Mason the shop administrator was able to help me out of a pinch. Had a metal pin on a machine I…read morecouldn't get out for the life of me. Had one of the shop guys pin punch it out with some real precision muscle. This place is old school cool and appreciate them beyond words.

I was told by the owner that he was going to remove a straight pipe from my truck and install the…read morelegal parts needed for the vehicle to pass smog. And I told him once he removed the straight pipe to give it to me. He did not give it to me so I asked him please get me the straight pipe. He said that he couldn't get me the parts, and that they were gone! So feeling bad he told me that he would get me a new one free of charge charge! I told them I wanted to have this new pipe installed on my new truck that I recently got. I told them I'm going to go have it professionally installed at another shop. But the owner insisted that he wanted to do it to make sure everything was done right. Due to my grandfather being a friend and done years of business with him. So I agreed to let them do it. My grandfather called the owner gave him a list of parts to order that we wanted and the owner said he would get right on it. Well they never did. So after waiting for 2 months My grandfather called the owner and asked what's going on. They said they didn't have the parts and that they would get right on it. After more time went by, around 6 months later they still refuse to give me the pipe that came off my old truck or get me a new one to replace the one they lost and told me they would replace free of charge and install onto my new vehicle. Then they had the audacity to call me and my grandfather liars and said we didn't have an appointment and that we didn't call and discuss what parts were needed and wanted to be ordered. They basically are calling a good friend and long time customer liars. Unbelievable! I could NOT recommend this place to a family member or friend.

Excellent customer service and very professional. i needed my ac fan repaired and they fixed it in…read morea couple hours. They were very friendly and I wouldn't hesitate to go back if I needed something else repaired. If you need a machine shop in the Modesto area go here

This driver was texting and driving. He was also throwing trash out the window all while on the…read moreBenecia-Martinez bridge. Please do not litter. Especially in a company vehicle truck or you will get caught and put on blast.

We had the opportunity to work with Marcus Groves and watch our vision come to life. The work…read morecompleted by him and his team were more than we could ask for. Thank you for helping our son and others with their Eagle Scout project. We are grateful to be able to give back to the community and celebrate the heroes that have served and continue to serve. Always the very best! The Neifer Family!

Awesome staff. I needed something made a few months back and all I had was an idea. Went in and…read morespoke to Wilson and he fabricated me the piece I needed in a timely manner.

Nick and the team are the BEST! So happy to have found a company that knows what they are doing at…read morea top tier level. At 845,000 miles on my supercharged 1997 Tacoma 3.4 I had 1) new heads 2) rebuilt Tcase 3) rebuilt 5 speed very happy and satisfied with there work! Thx again Nick! 5 stars!

We sent a customers 4runner engine 3.0 in to be rebuilt, and after 2 months we got it back and…read moreinstalled it. We noticed an oil leak on the passenger side that we made them aware of, and they said "let us know what you find". After adding dye and re inspecting the leak we found it coming from the very rear corner of the head gasket passenger side. We let them know with pictures what we found, and with some back and forth it was decided we just needed to remove the head to inspect the cause. They acted like they were willing to help and wanted to be kept in the loop. So we proceeded to remove the head, we straight edged it to find there was a low spot in the head. I showed them the picture of the daylight under the straight edge, as well as the the head gasket clean spot where it didn't crush when torqued. They said they would have to check in with their machine shop and get back to us. Guess what Nick said!? They said the machine shop "has no idea what they are even looking at in the photos and it doesn't make any sense" and that it was not their fault. Lololololo, for someone who is in the business of rebuilding ONE line of engines I will get my proverbial crayons out and draw the picture for you so you can understand. The part of the head gasket that was not crushed in the torque procedure surrounds the oil drain back. So oil was escaping passed the gasket and out the side of the engine. I love how we stuck our necks out to disassemble a freshly rebuilt engine, by this supposedly upstanding operation, and hand then conclusive evidence of a mess up, and they cannot take any blame. No further discussion, just flat out denial. I was in disbelief they wanted to screw us so blatantly and play dumb that that could not be the leak. We needed to take care of our client, since Yota 1 obviously was not going to take of us. So we had the head machined and reassembled with new gaskets, and what do you know! No more leak! It's so weird, when you do quality work, it delivers a quality product. #yota1takenotes AE Motorsports in Santa Cruz CA

You wouldn't expect a "machine & manufacturing" shop to work on well pumps but they do and do it…read moreright. Our well pump went out yesterday. 109 degrees and a pasture full of cattle needing water had me stressing. I already replaced the pressure switch but still no water. Two friends recommended Melo and I'm glad I called them. These guys came out within 1/2 hour! Kevin and Armando found a couple problems and got me fixed up in no time. I'm so thankful for their quick and knowledgeable service.

Great company to do work with. Our pump went out on the warmest day off summer. We called and they…read morecame out immediately. Mark was our guy. Very thorough, didn't have the part but drove to get it and repaired it in the same day. Would recommend to anyone!

Joe is the best! We found him when we needed some welding to reinforce the receiver on our trailer…read more I am super happy with his guidance and availability! He was great!!! Will definitely use him in the future!

Joe is the ultimate professional you are looking for. His ability to listen, assess, recommend,…read moreformalize a plan, diagram, then execute and deliver as discussed was beyond my expectation. The end product is a functional work of art. I highly recommend his services. Thanks Joe!