Requested an engine cover to replace a worn, sagger as they are no longer available OES or…read moreaftermarket. Owner took a great deal of time to understand what was needed, materials then make the honest assessment it was not something safely done by OCF. Absolute value these days as able to find a solution, and no charge from OCF. No question will find a good payday and use them. Obviously good work as well as principled ownership. Will not hesitate to use them.

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

I contacted several welding services to look at my rusted yard gates, and most of them told me I…read morehad no choice but to replace them entirely. Ismael was the only one who gave me a straight answer, telling me they could be repaired, and provided a very reasonable quote. The team did an incredible job and really focused on the details, from the welding itself to cleaning up the gates afterward. I truly appreciate the quality of their work and their honesty. I highly recommend Mick Welding Inc for anyone looking for skilled and professional service!

Very friendly and flexible. Was able to help me without much prior notice and at a very fair price!read more

I have had an excellent experience with Welsh. I have worked with them for years and they have been…read morereasonable and professional.

From the owner: We specialize in higher volume production for businesses looking to outsource their precision sheet…read moremetal manufacturing needs. Our capabilities include all types of precision fabricated parts and assemblies, from electronics chassis and cabinets, enclosures and components for the medical industry, aircraft and aerospace parts, automotive parts, irrigation enclosures, heat shielding etc. We strive to be the best vendor our customers have by offering quality products at competitive prices, good communication, and integrity.

I had a very disappointing experience with Hand Crafted Metalworks…read more From the beginning, I was extremely clear about what I wanted. I provided a reference photo on the very first day and made it known that I am very detail-oriented, especially because this was a major custom staircase railing project costing around $20,000. I wanted the finished product to closely match the design, proportions, style, and overall look of the reference photo. Unfortunately, the process became frustrating and confusing. Instead of feeling like my vision was being understood and executed, I repeatedly felt like the design was being scaled back, reinterpreted, or changed from what I had originally requested. Multiple revisions were needed because key details were not reflected properly, including how the railings were supposed to continue down the lower steps and terminate at the bottom. One major issue was that the shop drawings showed a rectangular/square wood cap, even though the reference photo I provided showed a round wood handrail. That was a major design difference, not a small detail. For a custom project of this size, I expected the drawings to accurately reflect the design direction I had communicated from the start. Another major frustration was the coordination process. I hired Hand Crafted Metalworks expecting them to manage the project. Instead, I felt like I was being put in the middle between their metal team and their wood subcontractor. I was connected directly with the wood subcontractor, who appeared to be unaware of important details, including that the wood was already part of the original quote. At one point, it felt like I was being asked to coordinate or clarify things that should have been handled internally by the contractor. There was also confusion around the timeline. A timeline that had been discussed as approximately six weeks later appeared to become September, which was a significant difference. When I asked for clarification, the conversation became defensive instead of simply explaining the scheduling change. Overall, my frustration is not just about one isolated issue. It is about the entire process: repeated miscommunication, inaccurate design assumptions, unclear subcontractor coordination, changing expectations, and a feeling that I had to keep fighting to preserve the original design vision I clearly communicated from day one. For a high-end custom project, I expected a much smoother and more professional process. Instead, I felt like I had to constantly correct, clarify, and manage details that should have been understood and handled by the company. Based on my experience, I cannot recommend this company. I'd post only after the credit card dispute is filed, not before, and keep screenshots/emails organized in case they respond publicly.

Our experience with this company was extremely frustrating. After paying our deposit, the project…read morewas ridden with missed appointments, poor communication, and repeated mistakes. Our primary point of contact, Chris, was responsible for coordinating the project, yet we frequently had to make multiple calls just to get updates or receive a response. On one occasion, workers arrived at our home, informed us they needed to leave to purchase materials, and then never returned that day. The problems extended far beyond scheduling. The initial measurements taken for our custom railings were inaccurate, resulting in the wrong product being fabricated. When installation day finally arrived, the wrong order was delivered. We were assured the mistakes would be corrected, only for another incorrect order to arrive later. The same crew was repeatedly sent back to address the issues, yet the problems remained unresolved. The quality of the installation itself was also concerning. The railings were improperly installed, caused damage to our walls and floors, and portions of the installation began pulling away from the wall within a month. Given that stair railings are a safety feature, this was particularly alarming and further diminished our confidence in the company's workmanship. What should have been a straightforward project turned into months of delays, repeated errors, broken promises, and constant follow-up on our part. We were repeatedly given timelines and assurances that were never honored, and obtaining updates often required persistent phone calls. The most disappointing part was not the mistakes themselves, but the lack of accountability and follow-through. Every issue seemed to require multiple calls and reminders, yet meaningful resolution never came. After months of frustration, we ultimately canceled the contract because we no longer trusted that the project would be completed correctly or safely. Mistakes can happen in any business, but professionalism is measured by how those mistakes are handled. Unfortunately, between the inaccurate measurements, incorrect fabrication, poor installation, wall damage, communication issues, missed appointments, and failure to stand behind the work, our experience was extremely disappointing. I cannot recommend this company.

Really enjoyed my experience here. I have been back plenty of times since my first time Tayler is…read morevery helpful with any Motorcycle or car related questions I have had . He's a very talented guy.

I brought my Harley Davidson to precision to get it all fixed up! Tayler at precision speed took me…read morein immediately, and fixed my bike all up. He put my forks together, required a need headlight and bracket, front and rear calipers all new lines and fluids. I bring him all my projects and he gets it done promptly and professionally. Thanks Tayler!!

I needed some custom welding work done on my bow fishing boat and Johnny came through with flying…read morecolors. Solid work with a reasonable price tag. If you're looking for a welder you can trust then stop looking - you just found him.

We are so happy and impressed with Bravo Fabrication's work. Johnny, the owner, was quick to reach…read moreout/set up a meeting and was on time and super informative on every aspect of our project. We had a pretty tight deadline and he made it work. We can't recommend him enough. The quality of his work is 10 out of 10. Thank you for making our backyard dreams come true!

A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts…read moreto resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence.

After searching in the local area, I ended up using A1 Welding for my project and it turned out…read morevery good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work!