Jose did an incredible job on a pretty unique project. I have Speed Queen appliances but bought LG pedestals and needed them properly retrofitted to fit and secure the washer and dryer. His attention to detail was outstanding. He noticed the factory brackets weren't even all the same, fabricated the correct pieces, and finished the final welding onsite to get everything perfectly aligned. The clearance and finished fit look factory. He was timely, professional, and treated the job like it was his own house. The value was excellent too. Having something custom-built from scratch could easily have been a $3,000+ project, and Jose found a much smarter way to get a finished, custom result. Highly recommend him for any fabrication work where precision matters. read more

Orange County Fabrication - Washer dryer custom bracket for pedestal - Metal Fabricators Near Me - Santa Ana, California

I had a problem with a bent floor on my G35 and Jose and Lorenzo did a great job straightening and reinforcing the floor before installing a heel plate for me, and Jose gave me a HUGE break on his typical labor rate. The rug around the plate didn't come out that great, but I did tell them that this is a track car (and that I'll probably be gutting the interior eventually), so I'll do what I can to clean the rug up a bit for now and reinstall the heel plate. I would've given them 5 stars but for that, because they do solid metal work as evidenced by my floor fix, and Jose showed me some of the custom industrial and automotive work he'd done previously. read more

See all

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my prayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care. read more

See all

Requested an engine cover to replace a worn, sagger as they are no longer available OES or aftermarket. Owner took a great deal of time to understand what was needed, materials then make the honest assessment it was not something safely done by OCF. Absolute value these days as able to find a solution, and no charge from OCF. No question will find a good payday and use them. Obviously good work as well as principled ownership. Will not hesitate to use them. read more

We wanted a specific design for a banner stand for our wedding. He went above and beyond while also keeping the budget low. He even added some tiny elements to make the design better, painted it, and made sure to make it sturdy. It came out amazing and we can't wait to use it for our upcoming wedding. Friendly and responsive. I'd definitely recommend Orange County Fabrication if you have any metal fabricating needs! read more

Super friendly, fast response time, professional, and did great work. Highly recommend!

Great work. Very friendly and responsive. Knew a lot about off road components and was able to accommodate multiple fabrications for us in a small window of time. read more

Starting with the initial quote request through Yelp, Jose was nothing but phenomenal, responsive, friendly, professional and knowledgeable. I needed to relocate a new winch that I purchased for my trailer for my auto towing needs. I relayed an initial thought that I had on how to place the winch with provided pictures but the design that Jose came was perfect. Jose was super accommodating because I had to pick up my trailer from Pasadena to bring it down to Orange County on a Friday night which would be really terrible during rush-hour traffic but he was available to receive the trailer late at night. The finished fabrication came out perfect and it looked great. The custom battery tray was a perfect touch to conveniently hook up the battery to the winch. I will definitely be back for all my custom fabrication needs when I'm ready for the next phase. Thank you, Jose! read more

See all

Jose was great to work with. He helped us modify some barn door brackets. The quality of the work and re-welding are excellent. He also repainted the brackets and the modification worked great!! Thank you for helping us get thru this construction issue! I look forward to working with Jose again on our next project. read more

My son's Super 73s frame split in 2 and I was searching for a welder. I came across Orange County Fabrication right away on yelp. The reviews were all amazing so I reached out. Jose got back to me instantly. He was quick to respond and offered a good price. He also offered to pick the frame up at my house. He also was able to finish the project a day early and then also offered to drop it back off at my house! The best service I have ever experienced! Jose is the best and my son's frame looks amazing. Thank you so much! read more

See all

I had 3 dining room chairs that have an aluminum base and started wobbling. I could not find anyone to attempt to work on them and the ones that would wanted to charge more than the price for a new chair. I reached out to Jose and he was willing to fix them for an extremely low price. I brought the chairs and he reinforced all base corners and did a phenomenal job in a short period of time. He had to do more work than initially intended but still kept the price we had originally agreed upon even though it should have been more. I believe these chairs will last a lifetime and if I ever need the other chairs fixed, I will be using him immediately. Nice guy and 100% would recommend him for any of your needs. read more

Calling all OC/LA county car enthusiasts / off-roaders!! If you are in need of custom body fabrication, bumpers, roll cages, tire mounts, trailers, truck hitch attachments, frame work - anything and all things welding and fabrication, look no further than OC Fab. Andy and Jose and their team of talented and experienced technicians do some of OCs best work ! I just got back my 91 K5 Blazer from them and I was so impressed with the quality of work, but before that - I want to get into their customer service. NOTHING but class and communication from these guys. Every step of the way, I knew what was happening with my truck, and the process of this build. They also took care of finding a reliable powder coat company as well to seriously complete this job from start to finish! They also created a rear gap filler that I was unable to find ANYWHERE. And I literally mean anywhere it was such a freakin headache and Jose took care of it with ease. 2 years of searching, and I'm so thankful these guys took that annoying burden off my shoulders! I'm already thinking about my next project because I have found my shop! I'm so happy! The cage came out incredible- I love the custom logo they welded on, it looks so dope ! I feel like I just wrote an essay so if you have made it this far, do yourself a favor. QUIT SEARCHING. Call Jose or Andy and get that project you've been sitting on started! Can't wait to see what you guys build next! read more

See all

This is a way overdue review, a year late. My apology Jose. Jose & Orange County Fabrication are exceptional! I went to a Ford repair shop today and had a full inspection done. I pointed out to them to double check chassis where the steering box is located & they said it's probably a lot stronger than stock. This is where OCF repaired 2 cracks by welding & reinforcing it with plates on October 18, 2024. Jose was super helpful & his customer service is top notch. Work quality is superb. Sense of urgency is excellent, dropped it off in the morning & got it done by 5:30. In between, Jose was in close communication and provided updates. Impressive! Ford E150 steering was much better afterwards & still is. Even though it was not cheap but the Peace of Mind & the whole experience was outstanding. Initially, I reserved my review until now because I was a bit skeptical of its longevity. Highly recommend OCF & Jose. Thanks! Ben read more

Contacted for a quote and owner Jose was responsive and good communication. Was able to help with a bull bar and lighting install and wiring job on my Jeep. Good quality work and fair pricing and kept to his estimate. Highly recommended this shop for any custom work and fabrication and car restoration project needs. read more

Orange County Fabrication - Bull bar, light bar and ditch light install - Metal Fabricators Near Me - Santa Ana, California

I was looking for a dual swingout for my F-150 as no one really makes one. During the quote, Jose was very confident that they could use my current bumper and add it on. After dropping off the truck it took roughly 3 weeks to finish plus powdercoat/install. Very happy with the product. They were able to achieve keeping the bumper's high clearance while keeping the swingout strong and light as possible. They did go over the quote a bit, but that was due to an additional request I made plus it was a little more complex. When picking up, Jose even mentioned an issue on the caps, but said the replacement parts were en route and they would fix when it came. Highly recommend if you need metal fabrication done. Little pricy but the quality of work is worth it. read more

Orange County Fabrication - Metal Fabricators Near Me - Santa Ana, California

See all

Jose was very responsive, and came out to my house to look at the proposed project. He is very knowledgeable, had some great ideas, understood what I needed, and offered a reasonable price. I have not gone forward with the project yet, because El Payaso started screwing around with imports from China and I am not confident that I can obtain the e-bike motor that is essential to the project. read more

Brought the guys of OC Fabs a tailgate storage for my 21 Ram Prospector. I was double guessing myself purchasing the storage unit because it required cutting into the tailgate and some slight modifications. Andy at the shop walked me through the process, and ensured me the job could be done. When we ran into some issues due to the company sending me the wrong storage unit. Andy, and the crew, stayed open late to complete the install. They were knowledgeable to notice the storage unit was incorrect, and knowledgeable enough to make the corrections so it would properly fit. OC Fabs communicated well throughout the whole process, and I look forward to working with them soon on the next project. I highly recommend them. read more

Orange County Fabrication - Metal Fabricators Near Me - Santa Ana, California

See all

Jose helped me custom fabricate a switch plate for my van lights. Their shop spent a lot of time designing several iterations to get it the way I wanted it to look but he only charged me for the fabrication of the final piece. Highly recommend Jose and crew! I'll be returning to get some custom step rails made for the van next :) read more

Orange County Fabrication - Custom switch plate that looks stock! - Metal Fabricators Near Me - Santa Ana, California

Do not hire Jose or his shop for any services. He will impress you with his initial friendly charisma and then "forget" to write the service request or the estimate down on paper. Once he has your item, he will swindle you the best he can. When his games have begun, he will damage your equipment and include sub-par work. As an additional service, he will leave you hostile voicemails attempting to corner you to pay him more than the estimate without completing the work agreed upon. Keep him on audio, video, and hold him to doing the paperwork he avoids. Be cautious using any of his services. I have kept all of his messages and hostile voicemails. As they are my property, they are available for review upon request. read more

Jose and his crew were extremely valuable in the creation of my custom motorcycle. I had a vision of what I wanted and brought pictures, templates and drawings. Jose listened and carefully plus precisely brought my custom frame vision to life, involving me regularly in the process. I am very satisfied with the result and glad I found these guys. I tried 2 other fabricators prior who were too busy or not qualified and kept pushing me off. I now consider Jose a friend and will be using them again on my next project for sure. Chris M read more

Jose did a great job welding my bike frame... Honest and a good guy! Strongly recommend if you need anything welded... read more

Great service, custom order with high quality materials and workmanship. Highly recommend.

For any of your Fabrication needs, look no further jose over at OCF is the man one of the best indusrtry! Aside from a great prices you get your money's worth! Nothing but quality work. Service is second to none was treated like if I've a lifelong client. read more

Outstanding customer service. Fantastic response time. Very knowledgeable. Truly the most knowledgeable of any sheet-metal. Highly recommend. read more

Taking our car to OC fabrication for a sunroof repair estimate turned out to be a wise decision. The estimate we received was not only competitive but also provided a more straightforward solution compared to the other facilities we consulted. Unlike the Lexus dealer who suggested a complete dismantling of the headliner to diagnose the problem, Jose of OCF was able to diagnose the issue promptly without the need for such extensive measures. His ability to identify the problem and propose an immediate solution, all while thoroughly explaining the process, reflects a high level of expertise and customer service. The fact that the car's headliner remained intact is a testament to their efficient approach. The repair process itself was handled efficiently, with regular updates on the progress and a clear timeline for completion . OC fabrication's commitment to quality work transparency and accommodating our schedule has clearly left a lasting impression on us, earning them a perfect score in our book. They were pleasant, honest and professional. We appreciate you all. Thank you ! DW read more

had a 60's era trailer in need of welding and rivet repair. Orange County fabrication responded quickly and jumped right on the job. Went through everything and got it back good as new in one day. impressive craftsmanship and ingenuity to figure out the fixes while keeping the trailer all original. read more

I needed a custom fabrication shop and found them here on Yelp. I decided to go with them based on their ratings and they did not disappoint! Everything about this experience was outstanding. Communication, timelines, cost, and most important to me- quality of work. I have a vintage 1967 Army M416 trailer that I wanted a tailgate on and other modifications for camping. There was no room for error and they exceeded my expectations! I'd definitely turn to them for future projects and recommendations. read more

See all

Jose and Able went above and beyond to customize the installation of stablizers for my heavy duty RV in time for a big road trip. Jose really listens to your needs and goals. They didn't just weld them on, they ensured the connection points were in the right locations, created bent metal attachments for improved strength and durability and finished with protective paint while keeping my budget in mind. They make custom fab work easy for the client. You immediately feel connected to their commitment to high quality work and results. We are already discussing the next project. read more

Owners Jose and Andy are good dudes but even better metal workers. I brought my stand up dirt bike trailer to them for some rust repairs and they not only fixed what I could see but also also pointed out some other structural issues and made those repairs as well. Price was reasonable. I also walked the shop with them and saw some of there other fabrication projects. Hands down the best place for any metal work! read more

Needed some custom work for a vehicle we were working on at my body shop. Went to talk to Jose the owner. Super chill guy. Gave him my idea. He ran with it and came back with a solid price. Less then what I thought it would be. Few days later. My project was ready. Super happy with how it came out. He can handle almost any project you can think of. So if you need fabrication or custom work. OC Fabrifation is your spot. read more

Orange County Fabrication - Custom grill came out awesome!!! Thanks Jose. - Metal Fabricators Near Me - Santa Ana, California

Excellent customer service!! I was recommended to Jose from a friend and he was very professional, patient and got the job done right.

So I went with Orange County Fabrication because no body shop wanted to do the repairs on my frame. I had cracks and rust damage on my frame because it was an east coast car. Brought it over so Andy can look at it and he said they can do it. One of the thin I like about them is that they work on an appointment basis. They basically give you a date to drop off your car and they basically start work right when you drop it off which means your car isn't just sitting in their shop waiting to be worked on. Him and Jose weee very professional. Jose kept in touch every other day and sending pictures every time he updates me. They went above and beyond than what I came there for. They installed some extra parts I needed and cleared out as much rust as they could and even rhino lined the repair so you can't even tell it was repaired at that section. Below are some before and after pics of their work. Highly recommend this place. Owners are down to earth but very professional. Would definitely do business with them again read more

Orange County Fabrication - Rust repair - Metal Fabricators Near Me - Santa Ana, California

See all

High quality work, quick turn-around and extremely knowledgeable team. Needed a structural component custom built and fabricated for our mobile destruction machine. We provided them with a simple mock-up of what we needed and with Andy's engineering expertise and background, he was able to re-design and enhance the component so that it operates more efficiently. The fabrication and quality of their work, especially the welding, is superb. Jose was amazing to work with. He sincerely listened to our needs and helped us achieve our goal. He also stayed in communication and provided updates throughout the entire process. Overall, OC Fabrications exceeded our expectations. Highly recommend!! read more

I took in my 2020 Polaris Rzr Xp pro to get work done and Jose& Andy did great job at building my Rzr...they went above and beyond with their customer service and made sure it was build right and quality work read more

Chrome Delete/ Off-Road Front Bumper W Skid Plate!... RZR 170 door upgrades!!! CRAZY FAST TAT!!! read more

See all

I bought a fourth generation 4Runner and took it to Jose for a lift. Once the parts came in, he scheduled me right away. I was pretty tired of driving around a stock 4Runner, it felt like I had a rental car, so I was really happy that he accommodated me immediately! The team there is super friendly and hyped to help you. I dropped my car off at 9 o'clock on a Saturday morning and as my ride came to pick me up, I noticed they already had started working on it. Four hours later the truck was ready and it came out incredible! I had already ordered tires and wheels from another tire place so I went there to get those installed the same day. This is the first time I've lifted a truck, so I learned the hard way that sometimes the wheels (I got Falken Wild Peaks), will rub against the fender. I left them a message Sunday that this was happening and Jose called me back first thing Monday morning. Even though they had a custom build offsite they were working on all day, they squeeze me after at 4 o'clock, and fixed the noisy tire rub. This was not even their responsibility, as my tires/wheels went in last and we're probably too big. In a crazy Covid and political world, it's pretty rare to do business with people who do the right thing and are generally caring and concerned about their work and others. Needless to say at this point but super happy with this shop and will send everyone I know there! read more

Orange County Fabrication - Metal Fabricators Near Me - Santa Ana, California

Was looking for someone to build a custom roof rack for our NV 3500. Can't believe how great it turned out. If you need ANYTHING done this is the place! Everyone there is friendly and got our job done much faster than other places I was quoted. read more

Orange County Fabrication - Metal Fabricators Near Me - Santa Ana, California

Best in Orange County, professional and quick turn around. Took my side by side in for a custom roll cage and they surpassed my expectations. I will definitely be a returning customer, I would like to give a huge thank you to OCF. read more

I couldn't be happier. I have an off road CVT trailer. I needed to have the rack where my tent is bolted to be much higher. CVT doesn't make the taller racks anymore and suggested I find a fabricator. I looked at different shops and liked OC Fabrication's photos of fabricating a lot of off road roll cages etc. I called and Jose responded right away and I explained the project to him. You know how you can get a feel in about a minute if it's going to be a good experience or not...I had a great sense that this was going to go well. I took the trailer into the shop and met Andy, Jose's business partner who's the main fabricator. We collaborated on the build - Andy had a ton of great solutions that I hadn't even considered. The price was what I expected it to be so I green lighted it. It came out perfect. The welds are some of the best I've seen, the attention to detail was perfect....everything was just perfect. One thing I really appreciated was that they kept me up to date and in the loop on how the project was going. I'd get text photos of the progress. The communication was excellent. I've had projects done where I've had to hound, bug, pursue to get updates....not these guys. I was majorly kept in the loop. They were also very up front with pricing. Basically, to sum it up - it's how business should be done. Up front, transparent, excellent work, good communication...what's not to love. read more

Orange County Fabrication - Off road trailer rack fabrication - Metal Fabricators Near Me - Santa Ana, California

Shouts out to the Orange County Fabrication crew for building my truck. Customizing the brackets to my airbags. Got it done no matter what the situation. Working round the clock on building the brackets and bolts from scratch cause the brackets and bolts were too small for my lifted truck. You need anykind of custom work, bring whatever you need getting done here. No job is too big or small for these guys. This crew go above and beyond with their work. Check them out on Instagram @ocfabrication read more

Orange County Fabrication - Metal Fabricators Near Me - Santa Ana, California