I needed a seat plate repaired they were friendly offered a quote at a great price and had the work…read moredone very fast ... I would definitely recommend them and will use them again if I ever need a similar service

Needed to weld back on this part to my trailer of my mobile scooter. Was calling down the list of…read morewelders i found online. The first guy I called from Bravo Welding quoted me $175 min for any project, told me he can't do same day repairs because his shop is in norco (his business address is listed in orange, ca) and so i called the next biz true torch... Matt quoted me $40 and i can stop by anytime today. Wow, what a difference. Come to this business guys for all your metal working and repair needs, guys!!

Irvine Fence Inc. installed a new fence top on my backyard block fence, replacing the old rusted…read morewrought iron one. I worked with Jose and he was very professional in measuring, providing the estimate, scheduling the job and overseeing the installation. The cost was reasonable, quality was great and the work done was excellent. Final fencing looks great and is a vast improvement from what was there. I can heartily recommend Irvine Fence Inc. for your fencing needs.

Eli and the crew did an unbelievable job. Came out on a Monday and by Thursday the fence was up…read more Completed in 2 hours, great customer care and follow up!!! Highly recommend

I hired MFK to remove and replace an old balcony in my residence. Mitch visited the site and…read moreprovided me with a detailed written proposal and a reasonable price. He also accommodated my comments and the changes I requested on some work items. He was very professional and we had great communication through completion of the project, exchanging multiple email messages and phone calls. The crew was always on time, efficient and responsive to my requests and cleaned up well at the end of each work day. I also retained them to replace my damaged wood sidings and trims. Martin did a great job custom making wood panels for me as my residence is relatively old and no sidings matching the original ones were available in the market. They completed this job efficiently as well. I found this family owned business trustworthy and will continue recommending their services to friends and family.

I ended up hiring MFK for my deck after the contractor I went with never completed the project…read more Hindsight is 20/20, but I should've waited for Mitch and his team. They discovered things that weren't done properly and did their best to keep our costs down knowing that we were essentially paying twice to have the deck fixed. They finished in the time they promised and didn't even hesitate or push back when I asked them to address some minor details about the fence. They're professional, knowledgeable, communicative - everything you want in a contractor but usually can't find all at once. Highly recommend if you want a deck done right the first time.

Love this place. Talk about metal toy store for grown ups. Have used them quite a bit for designing…read moresome cool projects. They just keep growing with new stuff. Check them out.

I have been trying to order a hinge for a month now. This company doesn't respond to online…read moreinquiries apparently. I've been a builder for 40 years and know exactly what I want. I asked for a price quote online on May 18th 2026. Today it's officially one month since my request. I'm a customer willing to complete a transaction, but Industrial Metal Supply just can't seem to handle it.

Requested an engine cover to replace a worn, sagger as they are no longer available OES or…read moreaftermarket. Owner took a great deal of time to understand what was needed, materials then make the honest assessment it was not something safely done by OCF. Absolute value these days as able to find a solution, and no charge from OCF. No question will find a good payday and use them. Obviously good work as well as principled ownership. Will not hesitate to use them.

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Decades of experience and quality work. I have used them several times and they know BMW motors.read more

I decided to give Engine Supply a try after my previous engine developed a major oil consumption…read moreafter a rebuild. I have yet to disassemble and determine the cause on that engine. I needed some cylinder head refresh work done on a replacement engine and took my head here. It's for a bmw s54 engine. I understand Engine supply does a lot of domestic work but will also do European and Japanese engines. After speaking with one of the guys, I found out that it's a family owned and operated company. The guys are definitely knowledgeable. The cylinder was picked up and was in great clean condition as expected by a good machine shop. What impressed me was they took me to the back to show my cylinder head during assembly when I dropped off my valve seals. The shop is well organized and clean. When I picked up the cylinder head, the Machinist who worked on my cylinder head also mentioned that the valves were returned in the exact order it was removed, which makes putting the shims I removed back it the same order easier to adjust the valve clearance on assembly. The cylinder head was assembled back into the used block. And is now running in the car without any oil consumption. It has done multiple track days without issue. I'm very happy with their work and can vouch that you are getting top notch quality work. Thank you Engine Supply Team! -Clarence

Santa Ana also have some of the best places to fix up your cars and trucks for good prices. SInce I…read morelive not too far away from this auto store, I had gotten some engine parts to fix up and upgrade on one of my other cars I hardly ever drive. I am thinking of selling this car, and I wanted brand new engine parts in pulling up the value. Nice place, cool people working here. Jose helped me in getting my parts, and he was cool to work with. This will be another go to spot for me.

Ed was very helpful in setting me up with the machining and parts I was looking for. I appreciated…read morethe regular updates on their progress so I could make plans on reassembling my engine.