A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts…read moreto resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence.

After searching in the local area, I ended up using A1 Welding for my project and it turned out…read morevery good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work!

Came in to ask about moving some fog light tabs on the other side of my bumper…read more Frank was very nice and welcoming. He listened to me about my project and quoted me a fair price. I also asked to straighten some bumper horns. Everything turned out great. He finished even before our spoken return time. Super happy with the outcome and work that was done.

All I can say is my expectations were not only met, they were far exceeded…read more 1. If you want an honest business, this is it. 2. If you want to support a family business, and not the big corporations, you've found the place. 3. If you want quality and care on your project, you get that here. 4. If you care about your hard earned money and want a fair price, it's here as well. And on top of all of this, they're personal and friendly. I highly recommend this business to anyone. 10 star business which all businesses should strive to be. Thank you so much! Vince and Stacy

If you don't care about customer service, don't mind the cussing and yelling, don't care if he does…read morethings you did not ask for or want, don't mind if he takes longer than he said, are looking to spend large quantities of cash, and don't mind if the quote changes, this place might be okay for you. Otherwise, when you enter blacksmith into Google maps, you'll see several other options in the area. I have a release arm for a fifth wheel that got bent. The website of The Blacksmith Shop says "no metal job too small." So I contacted Rick and sent pictures of the item. He said he could fix it for $100 and that he could fix it while I waited. That sounded great, because then I could watch. So I agreed on the price and made arrangements for the following week. But when I arrived as planned, he said he was busy and that I would have to leave the item. Over the next week he kept saying he would get it done. On one conversation during this week, he said he gets paid $200 / hour and that my job would take over an hour, but that he would still only charge me $100 since that is what he quoted me. After that, however, he said the job would take too long. Maybe he tried to do it and discovered that it was difficult to bend metal, or maybe he just decided the job was too small. In any event, I would have preferred if he had just backed out of the work and told me he changed his mind. I would have returned to retrieve my item and would only have wasted a little time. Instead, and without asking me, Rick ordered a new item online for about $110. If I wanted to order a new item online, I didn't need Rick for that. The reason I wanted the item to be fixed is because there are variations in parts, and a new one might not have the same exact specs. But if I had ordered the item for myself, I would still have had the old one to compare it to or fix. He said to pay $110 for this new item and that he was not going to make any money on it. About ten days later when the item arrived, he said just pay him $120 so that he could make a little money on the deal. When I arrived to pay for the new item, I asked if I could get the old item back. He said no and that he had already given it to the scrap metal dealer. I asked him for the invoice on the new one but all he had was the box it came in. I had $130 cash, but he didn't have change and asked me what I wanted to do. I asked if I could pay with a credit card. But Rick yelled at me and cussed and said he is not taking a credit card for a small job like this. So I said, okay I'll pay $110. Again Rick yelled at me and cussed and asked if I really wanted to quibble over $10. I told him I was not quibbling over $10. I was willing to pay the twice-raised amount he was asking for in cash or by credit card. He just didn't have the change and didn't want to take a credit card like other businesses. I was just not going to pay more when I had already been quoted less, $100 and then $110. Then he complained about all the work he had to do and that he wasn't making any money and that he doesn't like taking these small jobs. At no time did I yell, or cuss, or complain, but I did tell him that I did not ask him to order a new item online. I came to him for his blacksmithing skills, not his online shopping skills. After he finished with his yelling and cussing, he agreed on $110.

A true artisan! Rick was very accommodating, patient, and very fair with his pricing. He fixed a…read morebroken hinge on my fireplace door within a day. It got back to me cleaned, repainted, and well-lubricated. There's not too many blacksmith's around and nice to see that Rick is available and someone I can trust. Thank you, Rick!!! You did an excellent job and saved me from purchasing a whole new fireplace frame set.

I have a turbo downpipe that needed my recirculated dump tube length adjusted and cutting my…read moredownpipe in half to add a 2.5" vband before the bends. I called the shop and spoke to Joey and explained what I needed. He gave me quote over the phone and I decided to stop by. When I arrived I showed him the parts explaining what I wanted to do. Joey said he could get it done by next morning and gave me a final price, which was within quoted price over the phone so I agreed. Joey completed the work as stated and I am overall happy with the work. Will be back when I need more fab and welding done for my projects! Do note that this was labor only and I provided all parts. Pics show before and after.

Where to begin, Our family purchased our first Pop up tent…read moretrailer, a huge step up from our typical camping tent. We were excited to bring it home but noticed we couldn't get it into our driveway. The bumper was to low on the driveway and was getting stuck on the cement. I called around to all the RV stores and for some reason they all recommended ABC Welding in Anaheim. Well here comes ABC Welding to our rescue. Chuck was the nicest guy, very personalable and extremely honest, he told me to replace my hitch to a lower type hitch and that might solve my problem. He could of made a quick dollar off of me but chose not to . I replaced the hitch a week later and it still got stuck on my driveway so he suggested we add caster wheels to the lower bumper to clear the driveway so I brought it back to him and he did an amazing job! A few weeks later I brought back my trailer for a hitch attachment since he did such a great job on my caster wheels. He just didnt do a hitch attachment but a work of art, literally! He changed the spare wheel attachment point directly on to the bumper to accommodate the extra steel to placed to reinforce the bumper. It went from a 30lb. Bumper rating to well over a thousand pound gorrilla rating. This new setup can probably haul another trailer or a boat, that's how strong he built it. Again it's a thing of beauty and structurely superior to other bumper setups I've seen. I can't give enough accilades about this gentlemans skills and business practice. To simply say it, Chuck is Great!

I call Troy for all my welding needs. He's on time,professional and does great work. I don't need…read morewelding done often but when i do Troy is my go to guy.

I called Johnson Mobile Welding Service on Saturday about a small welding job I needed done. He saw…read morewhat I wanted done right away and was able to complete the job in less than an hour. Johnson Mobile Welding service has the experience you need for any welding/fabrication job. I highly recommend them.

This guy was my second choice however I'm assuming after whatever time he messaged me, he decided…read moreto not message me back either, but that's OK. I ended up doing the job myself. I am a welder, but our weed shop. The wires were stolen by some homeless people so we didn't have any power, but I forgot there was another welding machine under about an inch of dust that I was able to pull out and work with Anyway don't know this guy. Don't know if he's good or bad. Just know I left him a message and I was expecting a reply, especially because he said he was gonna be available in the afternoon but oh well.

We highly recommend Shane at HB Mobile Welding! He built a fully custom detailing rack for our…read moremobile detailing setup and listened to exactly what we were looking for. The work was high-quality, pricing was more than fair, and the turnaround was quick. Reliable, professional, and we'll definitely be using him again!

I needed some custom welding work done on my bow fishing boat and Johnny came through with flying…read morecolors. Solid work with a reasonable price tag. If you're looking for a welder you can trust then stop looking - you just found him.

We are so happy and impressed with Bravo Fabrication's work. Johnny, the owner, was quick to reach…read moreout/set up a meeting and was on time and super informative on every aspect of our project. We had a pretty tight deadline and he made it work. We can't recommend him enough. The quality of his work is 10 out of 10. Thank you for making our backyard dreams come true!

I'd love to screenshot our conversation, but this guy just left me hanging. I had a trailer hitch…read morethat I modified and I just needed some new brackets welded on. I already bolted on the bracket so there was no fitment involved at all just needed that welded up I ended up doing it myself because I was just Tired of waiting for someone to get back to me three days later no response so he told me he would meet me at his shop after 1 PM I showed up about 110 went into the lobby and apparently there's a few people that rent corners in this building. I'm assuming in the Lady is kind of there all around message taker so I asked is the guy there for OC welding Pro and she said no and she said she'd call him and the guy didn't answer the phone so I messaged him. Hey I'm sitting in your waiting room waiting for you. He message back we're closed today for the holiday. Wonderful why didn't you tell me that in the beginning instead of telling me he'll meet me at 1 o'clock anyway I don't know this guy. I never worked with this guy. He never worked for me. He just ghosted me anyway I hope y'all have better luck.

These guys do amazing work! Highly skilled and very fair prices. They were able to get my mailbox…read morepost welded within one day, so I was able to get it installed at my customer's house without disruption in their mail service.