I had my wheels power coated Gloss black for about two years ago. The have held up great and still…read morelook new to day. Because the wheels where original manufactured equipment, I don't have concerns of a wheel collapsing. I recommend Finish Logic, Walt C,

"Hey! Are those Timberlands painted black?"…read more -Elaine Benes, Seinfeld da Scene: Found a set of 21" OEM wheels on ebay, which came off a wrecked vehicle; price was too good to pass up. Found several outfits to do painting or powder coating and best comms came from Finish Logic so went w/ them. Dropped off the wheels and had a new set of tires drop-shipped to them. I was anxious during the short wait... da Work: After getting a look at my wheels and stripping it down to bare metal, they noticed a dent and small crack on one of the wheels and gave me the options w/ clear info. They suggested sourcing another wheel and that they would wait on it or they could do a dent & crack repair and roll the dice that it balances. Should've listened to them; that wheel couldn't balance. When I went to get an alignment and re-balance the tires, they confirmed an issue with one wheel, showing a little wobble at 80mph. da Service: Great comms from start to finish, quick turn-around, and quality work. I'll be getting back with them to do a replacement rim for sure, wanna make sure it matches. Use these folks!!

I had Tim do my Railing on my deck ,the powder coating failed miserably,there is rust every where,…read moreI have asked when he will redo the powder coating I am still waiting for his response.

really terrible work and company to work with. I took a few motorcycle parts here for a custom…read morebike that I'm building. I had to have them do several parts 4 times before it was even usable. They used duct tape to "plug" the fork openings in the motorcycle tripple clamp. It just made a huge sticky mess for me to clean up but the tape had covered sections that should be exposed. Now that I'm installing the parts i've had multiple locations where in just regular assembly (no hammers or force) the finish is flaking off. I can then just keep picking it with my fingernail. I also found that they had dropped my swingarm at somepoint before they powedercoated becuase the hole that my bearing needs to go in was clearly smashed in. Good luck to me getting a swingarm bearing back in a hole that isn't round anomore. There were also several times they told me my parts were ready and to come get them only for me to show up and the shop was closed with no one there. I did get a response when I texted but only to say they had left to go to another job, even when I had confirmed with them what time I would be there. Really bummed that I paid almost $400 for what ended up to be nothing but a hassle and a waste of time.

Eddie was very informative, kind and communicated promptly. He completed our powder coating project…read morequickly and professionally. The results are fantastic and we will be using him for more coating in the future. Thanks Ed!

From the owner: Welcome to Eddie's coats in the Bay Area! We offer top-tier powder coating services with a 20ft…read moreoven, certified expertise, rust prevention solutions, and transportation convenience. Our team ensures superior durability and aesthetics with state-of-the-art equipment and innovative techniques. Choose us for enhanced durability, aesthetic appeal, and reliable partnerships. Contact us today to elevate your products with premium powder coating services!

We are extremely happy with the service and results of two items we had powder coated. So wonderful…read moreto deal with friendly and nice people here. I will definitely recommend West Coast Specialty Coating if you want the job done right, timely and professional and for a reasonable price!

Just got my Brown Jordan patio furniture back (4 pieces) and it looks like it is straight off the…read moreshowroom floor! Absolutely perfect finish. There was even a bit of a bend and a break in one of the pieces and they did a fantastic job repairing it. These pieces are about 40 years old and they are picture perfect today! I never imagined they would come out looking this good. This is definitely one of those instances where "you get what you pay for" and this was worth every penny.

Wow! Awesome!! I…read moreHad a stuck, broken bolt on my engine block (351w, 94 F-150). I tried to extract the bolt, but broke the screw extractor off in the engine block. Then I tried to weld a nut to the broken screw extractor to back it out. However, I couldn't get my weld to stick, so I called in the professionals. M&M came out in less than an hour. In 15min, Miguel had the screw extractor & bolt out! Then he took the time to tap the hole and correct the threads (correcting my previous attempt to extract the broken bolt). This is an awesome team. Highly Recommended!!! Saved me an enormous amount of time and money. I will be using them for future projects including railings and fences.

We have a metal ice cream table and two chairs that are antiques and have sentimental value, they…read moresat outside the general store my wife's great-grandfather owned in Connecticut. The wood seats of the chairs had fall apart and we asked M&M to reinforce and replace them with metal seats, and then paid the table and chairs. I was a little nervous giving M&M this project since we hadn't worked with them before and the table and chairs had value to us. M&M did a great job! The new metal seats fit perfectly and the quality of the paint job was excellent. And, they did the work in about four days. They did a great jobs for us!!

I had a situation where someone scratched my wheel by accident so they had me contact Tyler at his…read moreshop to get it fixed. I called Tyler and realized how nice and professional he is he right away told me he'd take care of it, my wheel was painted with regular spray paint and even though that's not his expertise he said he'd figure it out so he got to it then later he called me and said the wheel was almost finished but him being and true expert and professional said he was not happy with the results because he likes to turn it really perfect profesional work so he offered me a deal I could not refuse and suggested to powder coat all my wheels instead of spray paint which will get damaged in the future due to cheap quality we agreed on an unbelievable deal and I could not be happier with the results which are night and day, the quality, the friendliness, the service, the results are what separate his work from others so if you are looking to powder coat wheels or other items Tyler is your guy I could not be happier with his work I definitely recommend him and his work. Check out the attached image so you can see his amazing work.

I own a motorcycle shop that specializes in customization performance, and we send a lot of parts…read morefor Powdercoat. I gave RF Coating a try when all other places were giving me a two week minimum turn around time. Ty had my parts done and ready for me the next day and at a very humble and reasonable price. His demeanor and customer service were welcoming, professional and incredibly understanding of time constraints. The powder coating was perfect. The customer was satisfied. My job was complete, customer was happy. 10/10 would recommend. Thanks again Ty. Much love brother

I had my cast aluminum patio furniture restored and refinished and am very pleased with the…read moreresults. The set looks better than new! The company was very professional, easy to do business with and did a high-quality job. The only downside is the amount of time it took to complete the job (about 14 weeks). I was not in a hurry so that did not present a problem. The wait was well worth it!

I have used Patio Chair Care, a Division of West Coast Specialty Coating, Inc., in Concord on Shary…read moreCircle, for probably a decade for assorted car parts I want to get Powder or Ceramic Coated. My brother and I took in my new 911 Porsche muffler to have it Ceramic Coated. We met with Dylan and Kyle and they were terrific. Kyle helped us pick the correct color for my project and told us to come back in a couple days and it would be ready. We went back 4 days later and the muffler looked beautiful- a perfect job. I give Kyle and Patio Chair Care a solid 5-Star rating and will not hesitate to use them again. Cheers, Michael H. Auburn, CA

We had a patio table / six chairs powder coated - excellent job by these folks and follow up was…read moreterrific. Our set looks better than the day we bought it. Thanks Tim for great work.

Although it took a long time because they are so busy, my table and chairs came out beautifully,…read more The flat black finish is exactly what I hoped for. The table and chairs look brand new! I can only rave about this service! Thank you Mayha and Glenn! It is raining today so the set looks shiny, but it is a perfect flat black! ''''''

Great customer service even better pricing. Outstanding quality as well. I had a motorcycle crash…read morecage powder coated and Violet was a pleasure to work with, she really takes her time to make sure you get what you want and the powder coat finish comes out flawless. I'm very happy with the service provided and will definitely return with future projects.

Really happy with the end product. I actually brought my ski bike frame in and they powder coated…read moreit to perfection. The price was awesome. I totally recommend this place. Initially, I couldn't tell where I was going when I entered the industrial compound area, but I figured it out. Just be aware you might have to drive around to find it. Viva La Raza.

Very fast response... easy to work with. Honest estimate and…read morefollow through... would recommend their service to all our clients as well.

This was my second time using Morgan Hill Powder Coating and I'll be back! Quality work quick…read moreturnaround and very affordable pricing ask for Mike he'll take good care of you.