Got my XRAY3 suppressor-height sights installed on my P211 GTO by these guys. The turnaround was quick, the installation was clean, and everything came out exactly how I wanted. Great people to work with, excellent craftsmanship, and they've definitely earned my loyalty. I'll be coming back for future work. read more

C.A.R. Firearms - XRAY3 suppressor height sight installed. - Guns & Ammo Near Me - Kent, Washington

Above and beyond in workmanship and outstanding customer interaction & satisfaction. Small selection of firearms. They are usually backed up with work, so plan accordingly. I've purchased from them and used their gunsmithing expertise and all at very reasonable cost. read more

Top rate work. It's hard to find a good gunsmith these days but this is a good one! All three projects came out excellent. read more

These guys are great , very helpful and friendly, I really recommend this place if you any gun troubles!

Best place for 2A! Friendly and fast service. Highly recommend it. I've done a few things here and can't recommend it enough.

Highly recommend. Had work done on two of my pistols. My czP07 had mCarbo trigger kit installed. Double trigger guard undercut for my Glock 30s. Extremely satisfied with their service and prices were fair. read more

C.A.R. Firearms - Guns & Ammo Near Me - Kent, Washington

See all

These guys are absolute pros. Great communication, great customer service and excellent work. I'd highly recommend them.

Took care of my CZs and Sigs. Great trigger work. Will go for all my mods. Friendly and take pride in their work.

Over the last 50+ years of shooting and collecting firearms, I have used the services of a lot of different (and sadly, indifferent!!) gunsmiths, but the folks at C.a.R are the only ones in the Seattle metro area that I can unreservedly recommend. They are not only simultaneously highly skilled, knowledgeable and professional, but cool, fun and passionate people to talk with. I recently brought in three handgun projects for them to work on, two of them requiring sophisticated repair expertise to accomplish. In terms of turnaround time, fair cost and impeccable craftsmanship, they simply knocked each project out of the park. C.a.R.'s best-in-class customer service with the technical mastery to back it up is a rare and refreshing find. read more

I brought my savage 110 in to them for a safety problem. also a Remington 1903 to have a cast of the caliber done for me. They had my guns for none months. I called them three times. when they told me every time i was next in line. I picked up the guns and the casting was done, but they told me the other one was unfix able. I got on Numrich gun parts and bought all parts that I needed and fixed it myself. I am not a gun smith and I did it. They lied and cheated me out of my money. I will never use them again and will tell everyone how they do business. Mike F. read more

Very friendly, knowledgeable, and cared about the stories behind the guns. Looking forward to getting them back in hand after smithing.

I'll keep it short. I used them as the FFL for a purchase. I was contacted when my purchase arrived. After completing all necessary paperwork, I received a call when it was ready for pickup. Fees were a slightly higher than some other local FFL but I think the service and communication made it worth paying. Satisfied customer here! read more

C.A.R. FIREARMS is a good place with good people & and knowledge. I highly recommend them for whatever you're wanting. My experience with them are outstanding. read more

5 stars for this business. CUSTOMER SERVICE A1 CUSTOMER SATISFACTION A1 CUSTOMER SPEED A1 Visited this place for 15 minutes. 15 minutes! Wanted to do an upgrade for my firearm and they took care of it in such a fast time! Had some sights replaced and nothing but friendly greetings and information! Will come back for further upgrades! Glad to have them in the area! read more

Stopped by to have headspace checked on a rifle and they are the nicest people who have a great understanding of customer service.

Did a refinish on hs2000- great price, quick turn, it don't get no easier than this transaction. And the importer sure left things ugly, they look perfect now. Great work, perfect. Thank you read more

Despite being extremely busy and backlogged for months, they took the time to help me out when I was in a jam. Quickly fixed my problem and got me on my way. Couldn't ask for better customer service. read more

Owner is cool and answered all my questions. Will continue to buy accessories and have my weapons cleaned with C.A.R. I'm glad i found these guys. Check them out!!! read more

My first visit to CaR was fun, felt like home, these folks know they are there for the customer and will treat you well. I took my ruger ranch rifle in to repair my dumb reassemble after cleaning and after a few minutes the the rifle was repaired and functioning. While I was waiting there was a gentleman that was picking-up his grandfather's shotgun they had restored and the gunsmith took his time to explain to the man how to load, what shotshells he should use and the best cleaning method for the shotgun. I left my rifle for them to upgrade the rear sight and have all confidence it will be done correctly. read more

Took my ar pistol build to get it headspaced here and they charged me a fare price rather than buying the gauges and doing it myself. Also wanted my gas block pinned but they suggested I just use the set screws provided with some red loctite to save me money. They do really good work for a fair price! If you're looking for a local gunsmith in the area check them out. They do have some firearms for sale but its not a traditional gun store. Josh and Chris were great guys, explaining the process every step of the way when they did find something wrong with my headspacing, turns out they just needed the rest of the firearm so that the bolt would full seat. It was a mistake on my part for not bringing in the whole rifle. read more

Negative Stars Customer Service = NO I was charged 1hr shop time for "research" on information I provided them on my initial visit. I'm just glad to be done with the mess. My advice, do your homework before you entrust anyone with your prized possessions. read more

I left my Kel Tec PF9 with C.A.R. Firearms approximately 4 months ago for a faulty trigger repair. I called them a few weeks ago for an update, the lady at the front desk apologized, and told me the gunsmith would call me later that day. He didn't. After calling them back, I was told that they started work on my firearm, and would call me back soon. They didn't. After finally speaking with the "gunsmith", he said the mechanisms were repaired, but the trigger still wouldn't fire with the slide on. "I'm not a magician" were his words. I'm not one to complain about wait times, I understand the high volume of work they do must make it difficult to run a business, BUT the way this business has avoided transparency, stonewalled my requests for updates and repeatedly failed to complete the services they claim to provide has made me completely lose confidence in their practice. A quick google search tells me that to be able to work as a gunsmith, you must be registered with a FFL (federal firearms license). This does not require any formal engineering qualifications or machining background. There is clearly a shortage gunsmiths in the greater Seattle area, but next time, I'll definitely look harder to find someone qualified. Another week after we last spoke, they still have my gun, and haven't called me back. read more

Great guys! They know their stuff and are willing to teach ya. They have a knowledge of the industry and they deliver on time and at a great price. read more

While looking to research my first AR15, I looked at a list of FFLs around here and walked in thinking this was a gun shop. Unfortunately, this is not a traditional store but rather a FFL gunsmith. Still in my disappointment, the owner Fred stepped up and took some time to teach me the basics and maintenance of what it means to own a modern sporting rifle (MSR) which turned out to be one of the most informative hour and a half. Fred is a respectable and knowledgeable gunsmith that that served in the Army (thank you for your service!) that knows his craft and made great recommendations of what In should look for in a first MSR. He also convinced me to keep my Mossberg 500 that I wanted to sell, suggested me to look into a higher quality complete MSR (i.e. Stag Arms), ditch the Ruger AR556 I was originally looking for, Glock mods, and educated me on WA state gun laws. During that time, I can see he really cares about his customers and wants each and every single one of them to leave with the best firearm made for them in a long term investment. read more

In an effort to add more value to my reviews, I've focused on looking for reasons to not award five stars so as not to appear to be a Pollyanna - in terms of being nice. In this case I would be offensively wrong to do so based on my experience with Fred and Christa of C.A.R. Firearms. I'm not really sure I can add much more beyond what Samuel C. and others have already said, but I'll try anyway. Customer Service - not only was the team highly responsive to my email inquiries, but they were very accommodating on schedule; for those of us who have relied on gunsmiths in this region for years, finding a highly accessible, available, and responsive smith can be difficult-at-best. And both via email and in person, I found Fred and Christa to be absolutely delightful to work with. Quality - "you don't pay until you're satisfied" is the motto of C.A.R., and it shows in the level of quality they put into their work. I've had plenty of work (and re-work) done over the years, and there's nothing at all that is anything other than the highest quality that has come out of the team for the work they did for me. Pricing - when you find a quality smith, it can be rare enough that you find yourself paying out the proverbial nose for it. Fred and team are exceptionally affordable, so much so that feeling guilty that you got too good of a deal *might* occur when you leave. Intangibles (expertise, candor, etc.) - I could have put this under the quality of customer service, but I think it deserves its own section. I love it when people challenge my assumptions and take opportunities to help educate me in a non-condescending way. I probably spent 45 minutes talking to Fred about all things not-related to my work, and he shared his passion on quality parts and builds to where he kept cycling into the back to share some of his personal works with me. Fred's as much a quality teacher as a gunsmith, and the teamwork he and Christa deliver together can't be faked. These are quality folks, and you leave a bit better for the experience. So they get the full five. Why? Because they deserve it. And if you're looking for a quality shop to entrust your firearms to, they should be in your top one. read more

CaR Firearms is the best gunsmith in the Pacific Northwest. Fred, the lead gunsmith is one of the most meticulous people you will ever meet. Just about everything he does is perfect. From a simple barrel cut down, to a complex rebuild of an entire rifle. If you have the work done at CaR, it will be done right and exceed your expectations. Fred did some work on my rifle last year, and I was blown away by the quality when I picked it up. What also was shocking was the low price tag for the quality of work done. My muzzle brake was installed level to the thousandth, which is not something that every gunsmith out there will do for you. The molyresin paint was perfect, without any defects in it at all, including under the handguard, where you wouldn't even normally see a mistake and most other gunsmiths would also just leave them because they aren't visible without some work to take the handguard off. I would trust Fred to work on any of my firearms and trust his opinion above that of anyone else out there. No matter if it is my high end competition rifle or the pistol I carry every day, and trust my life with. Fred will make sure that you are taken care of, it is done not just right, but perfectly. If you need something done, and want it done with the utmost care, CaR Firearms is where you should take it. read more

C.A.R. Firearms - Guns & Ammo Near Me - Kent, Washington

I'm sure everyone has read the other reviews. So it's no secret that this shop hands down is one of the best gunsmiths in town. From the moment I walked through the door they made me feel welcomed. There is so much knowledge and experience here that I could spend all day here just listening. I had them work on a Desert Eagle and my Tec-9. Both guns have been sitting for 10+ years and u can just imagine the shape they were in. They did deep cleaning and replaced some hardware. Both guns turned out better then expected. Now this is no ordinary place. They do custom work here to. So definitely a place for u to check out read more

Very friendly and helpful company. My Ar15 was messed up by another gunsmith and they repaired it on the spot. Price was reasonable as well. I will be doing business with them in the future. read more

I was as novice as can be walking into their shop the other day, but I can't tell you how great they've been in helping me pick the right firearm, shooting classes - even how to go about getting my CPL. I've been to shops before to consider a purchase but never felt as well taken care or and properly guided like I was here. Christa in particular is amazing but the whole team has been incredibly friendly, knowledgeable and huge help. I can't recommend them enough! You frankly won't find people more happy to help you find the right gear and give you a great price at the same time. read more

The best gunsmith in my book. Fred is a complete honest guy that I would trust any of my firearms with. His price and services are great, and is always eager to help. Definitely recommend CAR firearms if you're looking to do any work to your guns, especially hydro dip (I think that's what it's called) painting and trigger work! read more

I dropped off my SIG mpx for barrel threading and the entire experience was top notch. Fred did a great job and went above/beyond my expectations. This barrel thread job and hand guard trimming looks top notch. It shaved some weight from the MPX also. I will be back! read more

C.A.R. Firearms - Guns & Ammo Near Me - Kent, Washington

See all

Excellent work. Very satisfied. Best part is the way info is exchanged. The information is given factually about what and why, delivered without attitude and "talking down" to the client. I had questions about the specific gunsmithing job I wanted. I've had work done at other gunsmiths. The guys at C.A.R. were patient, and explained it thoroughly and what other options there were, and why they recommended one solution. The work is as well executed and as high end as the great gunsmiths working out of Oregon. Highest recommendation. read more

Yesterday I had the most wonderful experience at C.A.R. Firearms. It was my first time ever visiting a gunsmith and I didn't really know what to expect. I was greeted by a young man named Josh who was very friendly and welcoming. After my explaining the problem with my brand new pistol, Josh took it to the workshop in the back of the store. About five minutes later the gunsmith named Nick appeared. He had inspected my pistol and determined that the manufacturers' extremely tight tolerances required some special handling until it was broken in. Nick was highly competent and very professional. He not only solved my problem but he also gave me a little history background on the pistol. I cannot imagine a better place to do business than C.A.R. Firearms. read more

Had a pistol upper there for a front sight post installation and it ended up taking much longer then they had anticipated and I was emailed saying I was going to get a discount which honestly was nice and appreciated. When I went into pick it up they apologized for the longer time it took and ended not charging for anything. I couldn't believe it I said "are you sure" my job got lost in paperwork and took an extra month and so for being so patient and understanding they waived the whole job was honestly speechless. They are a great company and if you are in the area you won't be disappointed if you go with them. read more

Nick and Chris have a lot of business, for good reason! They threaded two barrels for me along with a couple of other tasks. This job was very complicated. I couldn't find anyone in the area to do this job before finding C.a.R.. So glad I did. They did a fantastic job. I couldn't be happier. Be prepared to give them the lead time they describe on their website. It's very clear to me that they take pride in their work. They take the time to do the job right! read more

I bring in my projects when I just can't get right like those 3 fingers on the leaf spring on a 1911. These guys take in my stuff and a day or 2 later call me to tell it is done. That 1911 in fact felt to me like it had a trigger job when he gave it back read more

I have been going to C.A.R. Firearms for years. They can tackle the most common of tasks and can also dig in to unique platforms or new platforms that do not have a lot of information available. I am always confident my expectations will be met. More often than not, they are exceeded. Fred is magic with a trigger. He has performed many trigger jobs for me with amazing results. He can even drastically improve a trigger they say can't be improved. He really understands the geometry of the firearm and what type of trigger you like and can customize to your needs. Christa is very knowledgeable and keeps you updated on the progress of your project and her knowledge base minimizes any surprises that could arise...even with expeditionary projects. It does not get any better than C.A.R. Firearms! read more

They are very knowledgeable, and understanding of what I wanted. I purchased a pistol and it was a great purchase. Definitely recommend C.A.R. Firearms. read more

I had these guys handle a transfer for me then do a set of sights on my carry piece and both transactions were great. They did the sights same day while I waited and it took them all of about 20 minutes. The thing I really like about this place is the employees. A lot of gun shops you go into today are full of these weird elitist gun snobby a-holes who make try to make you feel like you're an idiot. These guys were friendly, welcoming, and professional. I will most definitely be using C. a. R. for any future transfer or gun smithing needs. read more

Great customer service and the work was done more quickly than estimated. If you are looking for a good gunsmith, look no further.