If only I knew about Denmac when I was building my house, I would have used them for everything!…read more Despite being 316 [marine grade] stainless steel, I had a gate that would rust profusely within a matter of weeks and require highly abrasive red Scotch pads and 45 minutes of my time to clean every 6-8 weeks. All the DIY clear coatings I tried wouldn't last more than a couple months. Being oceanfront, tackling rust is something I'm used to and I am quite the expert at but clearly, this was made with low quality stainless loaded with contaminants. After dealing with this for 3 years, I concluded powder coat would be preferable over constant rusting. Before contacting Denmac, I had pursued bids from several powder coaters in the South Bay and even one in OC. Most would not give me the time of day, since I was not some large commercial customer and this was a small job. My bid was easy too, since I had architectural drawings of the actual gate with all measurements, from when I had it made. Plus, I had already picked out the primer (Cardinal E396-GR1372) and paint (Cardinal Black Superdurable 20% Gloss) so it's not like there were unknowns for whomever was bidding. A straightforward bid, right? Nope! A couple refused to bid because it was too small. One well known company in the OC who bid refused it unless I brought it on a pallet. I explained a pallet wouldn't fit in my SUV (I checked) but said I'd be happy to attach it to one when I dropped it off. They refused to provide a pallet and basically told me to get lost, in nicer words. A well known beach cities powder coater never answered my calls for weeks. Told me to email him my info, which I did, but never heard back despite me following up once a week. Multiple companies I spoke with refused to do the small parts. One said they were "too much of a hassle" to do. As I widened my circumference from Manhattan Beach, I reached out to Denmac and the difference in service was night and day. The nice receptionist told me who was in charge of new customers and I asked if I could have their email address to send my info. I sent it along with photos and despite being 4 pm on Friday, Mark the president responded a short time later (5:30) with a well written, detailed email, and price quote. No games or BS. Exactly what I was looking for. When I brought it in, the service I got on site was just as professional. The guy who helped me, I think his name was Nick, was super knowledgeable and attentive. When I showed him my small bolts and gate latch pieces, he didn't snub them like other powder coaters. He was happy to do them! I got the gate back quickly and now have it installed. I am so happy to have found Denmac because I tell you, contractors in the beach cities have too many rich customers paying them so they just don't seem to put any effort in to get customers or treat small customers right. You would think this VIP treatment was because Denmac had slow business, right? Not at all. They were busy and can be and each time I was there, I saw probably 20+ people working and the facility was jam packed with all kinds of things being painted. I was pleasantly surprised to see such a large, successful operation still treat me, the little guy, as being important too. Not only will I use Denmac for everything in the future, but I seriously think I will still use them if I ever move to OC or San Diego. They are just so professional and worth the drive, wherever you may be.

Denmac Industries does incredible powder coating with great quality and attention to detail. Their…read morecustomer service is excellent, friendly, reliable, and professional every time. They care about their customers and always go above and beyond. A trusted local business that truly deserves five stars.

My new motorcycle brake pedal, formerly chrome now petal black is beautiful!! It matches the bikes…read morecolor and makes my rides more comfortable

Lopez Iron Works sand blasted and powder coated my antique patio set…read more It turned out amazing Fast. Beautiful work. Great price.

they an excellent powder coating job on my 20 year old Honda rims! reasonably priced as well…read more great all around!

Two days ago, I had my car rims powder coated here. As it was my first time, I was a bit concerned,…read morebut the results were extremely satisfying. The price was also very reasonable, and I will definitely come back again. Changing from chrome to a non-glossy black finish made the rims look truly impressive. I would like to express my sincere gratitude to the expert Mr. Rubin and for his excellent work. Thanks to R.B also. See you again~

Great work at reasonable prices. Parts never get lost and are done pretty fast . Great color…read morematching too

There really busy but I got what I needed glad they was open. My contact was not there but staff…read morewas friendly and helpful. Hopefully this is a new renew beginning. Guess I'll start new year and find out how we do. Feeling good. They have my supplies I need. Hours very. Parking is a hit or miss

I let the wife drive my truck last week and she ended up "curbing" my custom wheels. Luckily, she…read moreknew of Dr Wheel, (she used them twice prior for her Camry) needless to say I ended up needing their service. I left a deposit and made the appointment. Jonathan showed up promptly and got work immediately on my rim. His work and skills are impeccable. It only took him roughly about 20-25 minutes to leave my wheel looking "Good as new" for less than the cost of a new wheel. I definitely recommend Dr Wheel for your curb/parking mishaps. Hopefully I won't need their services again but if ever my wheels get damaged, I'll gladly use Dr Wheel again! Thank you Jonathan for the fast, friendly and incredible service.

I can't even tell anything went wrong in the first place!…read more The guys were fast, efficient and professional.

Had a great experience with a silver powder coat on a set of 2005 Camry 16" factory wheels…read more I got a set of throwaway wheels on Facebook Marketplace intended as a gift for my mom's old car. The wheels were in pretty bad cosmetic shape - dings, scratches, brake dust everywhere, peeling paint galore, and some pitting on the back for one of them. After Proper Motion finished my powder coat they came out spectacular. You can also clearly see all the factory Toyota markings on the back despite the years of obvious neglect. The worst wheel still had some of the pitting come through only in the back, but that was the original wheel's problem so kind of expected for a 21-year-old wheel. I didn't ask them to file it down (which would've removed probably too much material), so I'm still thrilled with the final results. I guess I visited their newer shop in Sante Fe Springs. They had a clean and neat front lobby and a cozy waiting lounge with couches. I just dropped off the wheels, so didn't get to take full advantage of the lobby. I asked for pricing over the phone before coming, and once I arrived everything was still as quoted, even with the poor condition of my wheels. They had lots of sample swatches and a few miniature wheels as demos, but I wanted a lighter silver to match the factory paint. They were super helpful and special-ordered the matching powder / paint for no additional cost. I just had to wait a few days for the order. Overall would highly recommend.

MY REPLY: These are true forged wheels brother, try again. If you remember this, why don't you tell…read moreme what kind of car I was driving? Don't go here. It's not about the bad job done, it's about the lying and failure to answer requests for help. Bad jobs happen, there's nothing wrong with that. But not trying to right your wrong is a sin. REPLY FROM LYING OWNER: These wheels had really bad casting marks so we stripped them, primered them, and powder coated them. perhaps the primer was added too thick to try and erase the casting marks ORIGINAL REVIEW: Garbage. Wheel was never stripped of the original coat and has way too much PC on it now. Wheel is slowly leaking air. Also, they somehow damaged my original custom black TPMS sensor and replaced it without telling me. Even for the price, it's garbage. They have plenty of business, they could be a bit more honest.

Hands down the best auto shop around. The customer service goes above and beyond in a way you just…read moredon't see anymore. No matter how tough or complex the repair is, they get it finished flawlessly. Fast, highly skilled, and honest. 10/10 recommend!

To all you youtube DIYers out there, I fugged around and found out. I replaced my struts with…read morecoilovers a year ago and had all kinds of grinds and groans coming out of my suspension. The back started sagging so I contacted Baja to adjust the height and level the car. He gave me a very fair quote, but I didn't have the time to come in. Months later, I hit him up and he had me in, within days. He knows what he's doing and pointed out unrelated issues under the car. He knows what he's doing and judging by the cars on his lot and shop, he's an artist when it comes to customizing. Rare to find an honest and talented mechanic, but this is my shop for any custom work!

Took my antique bike frame for powder coating it had to be stripped sand blasted ! One area had a…read morespot of bondo they never told me they went and powdercoated it and it had a big giant burn/ dent in it ! They said it was my fault and refused to return my money nor fix my item ! The lady was rude even after looking at my item never called to tell me of the damage so I can have it repaired she insisted on payment for a Junk of a job '! I took it elsewhere for a correct job and it cost me less ! DO MOT TAKE ITEMS HERE MICKEY MOUSE WORK ! I'll be contacting the Better business bureau!

This is the place to go if you need high quality powder coating at a very reasonable price. Gloria…read moreHernandez (owner) gave me a quote over the phone based on pictures I sent her of the table I needed powder coated. The ornate table was completely rusted when I took it in and they returned it better than new. Gloria responds quickly to any questions and updated me with progress reports. It was delivered as promised. I'm very happy I chose D&G Powder Coating for the work. I mentioned D&G to my neighbor and he had his patio chairs powder coated and they came out nice! I'm coming back for any future needs and would highly recommend D&G Powder Coating.