Red is knowledgeable about firearms and a man of Integrity. I have done business with Red for…read morealmost fifty years.

A little bit of an odd shop. Kind of like an antique mall. But the older gentleman knows his guns…read moreand will lead you in the right direction without trying to bleed you dry. Has a good selection of collector guns as well if you're interested in acquiring something unique. Sure Jon's Sport Shop down the street has a larger selection, but nothing but attitude when you ask simple questions when deciding on your first gun. The owner of 45 Gun and Marine is like a grampa that won't lead you wrong and has a good story or two to tell. Makes for a good visit rather than being pushed out the door after a sale or if you aren't going to spend right away. The guy likes what he does and it shows.

Very informative podcast host. Seems to be well liked in his community, and treats other people…read morefairly.

Went in for a cerakote job on a custom rifle that I fully disassembled. Was quoted 4-6 weeks…read morebecause cerakote man was busy or waiting bail or whatever ... after 5 months of checking in on how the far along the job was and receiving some other excuse of how some unfortunate circumstance unfolded, I gave up and said I'd pick my disassembled rifle up and have someone else do it. Mind you it's been media blasted and the steel has been in the raw for 5 months now. Magically it was done the following day. Not only did they cerakote my custom barreled action and various components, they cerakoted about 4" of my bore from muzzle end and much of the chamber as possible and stripped my $300 scope rings. I did receive a bunch of stickers though for what that's worth.

Great service. Had my pump .410 continuing to reduce the rabbit population in no time! Literally 10…read moremin

I brought some guns in in order to see if this gentleman would sell them for me after about a week…read more He sent me the information valuing my guns at about 25 to 30% of what their actual net worth was and then wanting to take 30% of that thereafter if they sold those numbers, there was no way to verify who bought these guns if I was to strike the deal with him or what the price was wisemen say stay away

ive made a couple of purchases online from this store and ive got to say awesome outfit. i bought a…read morebump fire stock recently and damaged the slide block that replaces the grip trying to adapt it to a polymer lower.. (this was my fault not the product.) i sent an email describing my mistake and "asking to purchase a new one " i was informed that they didnt sell individual parts but they would send me a new one at no charge !!! i offer to pay and no just sent me a new one .. theses guys rock .. love the product that bump fire is awesome

From the owner: We work hard to provide you with the tactical equipment you need.Body armor with AR500 plates,…read moreplate carriers, tactical vests.Never find yourself wishing you had body armor. Tired of the same old AR15 uppers?This one looks like every other upper on the market.We build AR15 uppers to what you want.Choice of barrels, hand guards, dust cover, etc.

I have been visiting Midwest Shooting Center. I will give more reviews. I have done a lot of range…read moreshooting.

From the owner: Midwest Shooting Center is your premier destination for firearms training, indoor shooting range…read moreexperiences, and top-quality firearms and accessories. At MSC Appleton, you’ll find fourteen 25-yard lanes, capable of handling up to .308 caliber, perfect for shooters of all skill levels. Whether you’re sharpening your aim or just starting out, our facility offers a safe and comfortable environment for your training. Our friendly, knowledgeable team is here to guide you every step of the way. From finding the perfect firearm and gear to offering personalized training and classes, we’re dedicated to helping you get the most out of your experience.

I took some firearm related parts I had laying around to Dan at Appleton Armory. For a small…read moreconsignment fee, he posted adds for my my parts on Gunbroker and they sold fast. The turn around time to get cash in my pocket was surprisingly quick. Im very happy with this service he offers.

I brought my handgun to Dan at Appleton Armory for a installation of aftermarket sights. I highly…read morerecommend Appleton Armory LLC if you are in need of a gunsmith. Dan is very knowledgeable and detail oriented and goes above and beyond with customer service. I will not hesitate to take any of my business back to him in the future.

This is an update of my 2017 review…read more I recently received an email from the gunsmith with whom I had arranged to restore my 20 gauge Purdy from the damage caused by Paul Lippold's "restoration." I include it below. .................................. Hello Peter, I'm afraid that I do not have good news for you. The damage done during the previous attempt at "restoration" of the gun just isn't able to be rectified to either my standards or in any cost-effective way. A number of times, I have pulled the gun from the rack to begin work on it and every time the same realization occurs. That being that what I mentioned above. I then put it back in disgust, thinking that maybe it was just my frame of mind, when, in reality, I was simply refusing to accept the reality of the situation. The primary problem is the amount of material that was removed from the face of the standing breech and the breechface of the barrels, and, the way in which it was removed. As I had initially determined, both surfaces had apparently suffered significant pitting and were ground and/or filed to remove the pitting. The material removal from the frame's breechface was done wihout first annealing the frame. This resulted in a surface that is not remotely flat, due to varying surface hardness. Correcting this would necessarily involve first annealing the frame and then truing the breechface surface (which means even more material removal). This is going to leave a gap of approximately .015 to .020 inches, meaning that that is how far the barrels will need to be set back. That also means that the new hinge pin will have to be larger in diameter by double that amount (because it is round). Setting the barrels back that far will cause the front of the rear lump to no longer be in contact with the frame (no longer fitted on the circle), which means that the hinge pin will now be the "reaction member" that reacts the forces upon firing. Also, the ornamental ribs of the forend iron will no longer meet their counterparts on the barrel flats, resulting in a visible gap on each side at that point. Then there is the extent of buffing wheel induced damage to all sharp edges and contours, to say nothing of the vise jaw damage to the frame. This can all be corrected but it will mean material removal to the extent that, when finished, none of the original engraving will have survived. All of the metalwork will be completely bald, including the rib address, meaning that engraving will have to be redone, in its entirety. Add to that the fact that every single screw must be remade, the gun stocked, checkered, finished, and so on. As I said, the damage is just too extensive." ...................................... To sum it up, Paul's "restoration" has made a $65,000+ gun worthless. Think cafefully before you give any firearm to this hack.

I went from Appleton to Milwaukee looking for a pre-1964 Winchester 1894 and was pleased to find…read moreRon's had the best selection and best prices. At least $125 less than the Big Box guys. Settled on a very nice .32 Win Spcl at $400 so I couldn't beat that. Great staff, no pressure or macho hype, quite the opposite actually. Very laid back. A really nice selection of used rifles and shotguns was what I like about Ron's, plus the fair prices. They specialize in antique and classic refurbish so they are on the top of my list when I need that too. I have friends also from IL that stop here every time they pass thru and frequently they find a good deal. It's on my 'must visit' list now every time I go thru the north Milwaukee area, (Germantown, WI).

Excellent place for professional gunsmith services! My third experience has left me happier than…read morethe last one! These guys are awesome. Trust me, don't waste your time anywhere else, these guys will make your day!

Nate and his crew are the best in Wisconsin. Whether it's gunsmithing work, advice, a new firearm,…read moretransfers, NFA items etc, Fox Valley is the best of the best. I've spent plenty of hours, and plenty of dollars here, and have yet to find anyone close to their level of service. I will continue to swing in every Thursday night (they're open til 8 on Thursdays!) for quality service and quality conversation. Thanks Nate and crew for all your help over the years! Pat K

Looking at your ad on line, you have a hose cart on sale for $89…read more Also looking on line again I see the Oshkosh store has zero. Why would this store have a sale and have none available? This has happened with previous sales, I can remember coolant. I thought this would be an excellent Fathers Day Gift. Is Oshkosh getting a shipment? I really love the housewares department. There are not sales on kitchen stuff. I am looking for pots and fry pans second.

Great customer service, Linda was very helpful & kind. She helped me out with purchasing sun…read moreflower seeds for my daughter's classroom. I really appreciate her kindness.

So this team has a very clean business that was professional and friendly. I went there to sell…read moresome old jewelry and they asked me "what do you want for it"? I gave my answer on the very minimum I would accept. They took time, had the test and the knowledge to look at the diamonds and gold. It took longer than I expected but was happy it was thorough. The two gentlemen that assisted me were kind and treated me well, very well. They came back with and amount that far exceeded my request. They could have lied, cheated and given me my ask. Instead they gave me $400.00 more than my initial ask. I was shocked and felt the had integrity. Last year I tried to sell the same jewelry at a place in Appleton and they said "$100 "and literally threw my jewelry on the counter towards me. They are trustworthy and have integrity. What a shock. A good one. Bless them for honesty. Trust them.

I couldn't find a Yelp link for Mister Money in Appleton but I'm willing to bet the same folks own…read moreboth franchises. I bought an item off of eBay from these folks. The item was delivered quickly but it was advertised as "new". This item was previously used and heavily damaged. When I attempted to initiate the return, ebay closed my case based on the seller's word even though I provided pictures of the damage. They then demanded a receipt for an item I bought from a store outside of eBay and promised to initiate the return once I provided that receipt. I'm guessing they somehow used that receipt to "prove" to eBay (which almost always sides with sellers...$$$) that I damaged the item. It makes no sense since the other item was identical and cost $100 more. If you're going to be an unethical person who damages an item and then returns it, wouldn't you return it to the store that gives you the MOST money??? Basically, this pawn shop scammed me out of $150. I'm using this opportunity to advise folks to steer clear of this unethical business.