Overall great service great customer service very standup respectful guy would bring any other…read morething that I need to his shop. Would recommend.

He did the job as I asked, just took a bit longer then he quoted. Will use him again, he was very…read moreknowledgable and pleasant to do business with .

Highly knowlegdeable and well equiped shop. Easy access and working hours. Good prices and turn…read morearound time.

The worst machine shop I've had the misfortune of dealing with, personally and professionally…read more Issues: Poor workmanship and quality, incomplete work, low levels of professionalism or professional courtesy, billing for work not performed, and lastly doing unauthorized work. I have had numerous awful experiences both personal and professional with this machine shop. They come highly recommended over the years so I expected at least a 4/5 star service and workman ship to be top notch. They have been in the business for a long time, so you expect a shop like theirs to have it down to a process. Personal: I had my engine built for my track car a shop on the other side of town, I was excited to see the shop I had selected using Ball. I got the engine completely overbuilt, got it on the Dyno for the tune, and my very experienced tuner noticed a noise that caused him to cut off the session and advise me to get it towed back to the shop. Turns out Ball Engine had clearanced my engine wrong, requiring my shop to spend the time to take the motor out and replace Cams, Crank, And all valves and retainers. Another 2 months of my car being down, and she's back. Finally everything seems right. 7K miles later, my engine in my track car snapped a valve on track. Bucket wasn't spinning. Engine seized. 10 K down the drain, because of their mistake. No warranty. Professional: They also did work for my Dealer. Sent some heads over to be inspected and advise on needed work. My customer was on a tight budget rebuild. Ball engine does 500 dollars of unauthorized work. The heads don't even look cleaned. It's still got a bent valve. Subsequently, Each of our service advisors has at least one "incident" with this machine shop, all having to do with work quality and price. It is apparent that Ball Engine is riding on its laurels of previous work and does not care one bit about its customers. Skip this place and save yourself many headaches.

I purchased a ladder rack from Steve at Flex Fab and they installed it, then had to custom fit it…read moreto my truck a few days later. Even though they were backed up with jobs and had two welders out at the time, they still found time to help me out so I didn't lose any business. Great shop, great peope would definitely recommend them for anyone. Wedding any welding or repairs.

Called and was treated as if I was a bother to them. The lady I spoke with was dry, dismissive, and…read morebarely spoke back to me. Not sure yet if I'll use them as I don't even know if they can do the work at this time, but based upon first impression I am definitely exploring others options.

Categories: Machining, Manufacturing, EDM, CNC, Mold-Making, Prototyping, Part/Tool-making:…read moreIf you are looking for a non-prismatic CNC or EDM machine shop in North Georgia to make your part or to engineer your idea, look no further! Maskinell Systems, Inc. specializes in prototyping, mold-making, machining, small runs, and tough materials. They do stainless steel, carbon steel, aluminum, copper, plastics, finishings, and more. Check out their website: www.maskinell.com or call (770) 532-0555. Maskinell's Service Area includes: Gainesville (9000 sqft.building just West of Gainesville airport), Suwanee, Cumming, Dawsonville, Cumming, Alpharetta, Metro Atlanta and North Georgia. (M-F: 9-5).

I was looking for a new sailboat driveshaft and apparently not enough are requested to warrant most…read moremachine shops to offer that service. After speaking to Tom at Maskinell, not only was he eager to help me, he provided the most positive customer service experience I've encountered in a very long time. Call it "Old Fashion", but some of us still remember the old days when owners cared for their customers. Tom and I definitely are from the same old school. CUSTOMERS AND QUALITY CARE MATTER! Thanks Tom for being there in my hour of need, meeting and exceeding my expectations in more ways than one! I've finally found a machine shop that delivers more than just products.

I have a 1969 dodge charger RT 440 and ASS rebuilt it with a Stoker to 505 Also put in a tremec 5…read morespeed along with many other things too many to list. Julius and Justin are the best in the business and I am a very satisfied customer!! 5 stars on customer service and communication during the work performed. I have been to many shops in the past while owning the car and ASS is the only one that will now work on my car. If you want it done right and with an honest price I would highly recommend this place of business.

I rarely leave reviews. As a business owner myself, I understand the impact they carry. Four years…read moreago I gave Atlanta Speed Shop five stars and meant every word. Julius and Justin had stepped in to rescue a build on my 1967 F100 that a previous shop had majorly dropped the ball on -- a project that had already cost me over six figures. They were thorough, honest, and went above and beyond. Over the years I referred significant business to them because of that experience. When I acquired my 1968 F100 and was ready for a new build there was no question where it was going. I trusted them with it because they had earned that trust. This update is not written out of frustration. It is written because other customers deserve an accurate account of what happened, and because I exhausted every private option before going public. I brought my 1968 F100 to Atlanta Speed Shop in early 2026 for a significant engine and drivetrain build. I sourced the crate engine and select components directly. The shop handled the transmission rebuild through their own vendor, all remaining parts, and all labor -- totaling just over $10,000 on their invoice. My total investment in this project was well in excess of $20,000. Within the first day of having the truck back I noticed a loud screeching noise on right turns, a throttle that stuck twice, driveshaft scraping, a whining rear end, and oil spots. I reported everything to Justin in writing immediately. The truck went back for its first warranty visit. It came back still unresolved. Following that return the AC stopped working and a shop mechanic was dispatched to my home to fix it -- a basic item that should have been caught before the truck ever left. Julius had signed off on it. The truck continued to have issues. A significant driveline vibration then appeared under hard acceleration that had never existed before this project. The shop requested a ride along with Julius -- the same owner who had signed off on the vehicle multiple times already. The truck went back for a second warranty visit where Julius confirmed the muffler was contacting the driveshaft -- a direct result of their exhaust work. This was consistent with what Justin had already acknowledged in his own words in a text message. The vibration was resolved but the exhaust remains unfinished. A cracked frame rail near a critical suspension component was also disclosed to me for the first time at this visit -- despite the truck having been in their shop multiple times with Julius signing off each time. Today's warranty tow cost me $503 out of pocket -- an expense that should never have been mine on a warranty visit. When the final invoice arrived a 3% credit card fee appeared that had never been disclosed or applied to either of my two prior payments on this same project. Justin acknowledged it and waived it in writing -- because he knew it had not been disclosed. The invoice was never signed by me and the terms were never agreed to. If a response to this review claims these issues were pre-existing I would ask the reader to consider -- if that were true, why were they never disclosed across multiple visits and multiple sign-offs by Julius? Justin acknowledged the exhaust running the driveshaft in his own words after the truck had already been delivered as complete. These are not my characterizations. They are documented in the shop's own communications. The technical capability here is real and my 2022 experience was genuinely excellent. But capability means nothing if the work is not checked before it leaves the shop, warranty issues are disputed rather than resolved, and a loyal customer who invested well in excess of $20,000 and referred significant business to you is treated the way I was treated when things went wrong. I have documentation for every word of this. Future customers deserve to know.

AAA Welding custom designed handrails for my home. The quality is phenomenal, they are…read moreaesthetically pleasing, and my front door is now up to code for my insurance company. The customer service and communication was clear and I got what I expected. It was definitely affordable. I would use them again for sure.

Did a great job providing Mount, explaining, process, troubleshooting and critical thinking for…read moreissues that arose

Here's a polished, helpful Yelp-style review you can use for Fix It Pro. If you'd like it shorter,…read morefunnier, more formal, or customized to a specific repair they did, I can adjust it: 5-Star Review for Fix It Pro I had an excellent experience with Fix It Pro from start to finish. Their team was professional, responsive, and genuinely committed to solving the issue--not just rushing through a job. They showed up on time, diagnosed the problem quickly, and explained everything in plain language so I knew exactly what was going on and what my options were. The technician was courteous, respectful of my home, and made sure everything was cleaned up after the work was finished. The repair itself was done efficiently and the results have been flawless. Their pricing was transparent with no surprise add-ons, which I really appreciate. It's rare these days to find a service company that combines skill, honesty, and great customer care, but Fix It Pro delivers on all fronts. I'll definitely be calling them again for any future repairs, and I highly recommend them to anyone needing reliable, high-quality work.

Showed up very quickly to do a last minute carpet cleaning. Price was very reasonable without a…read moreprior appointment! VERY VERY HAPPY with the job that was done and the professionalism of the company as a whole. Scott and the gentleman that showed up with him were great and very professional and nice! Will recommend them to EVERYONE!!!