I have used BK Industrial for many years and I have always received high quality results.read more

From the owner: Top quality spray painting powder coating sandblasting whatever your finishing needs are we are the…read moreplace to give you that perfect finish you expect. whether new fabrication or a restoration BK Industrial has what you need how you want it when you want it at a affordable price. for quote email bkindustrial@comcast.net

I just had my wrought iron furniture sandblasted and powder coated. It consisted of a table, and…read moresix chairs a high top bar, and two swivel chairs. It is about 15 years old, and now it looks better than the day we bought it. Highly recommend this company. Everyone was so pleasant to work with.

Very nice, honest people who do great work. They stripped and powder coated a vintage steel wire…read moreKnoll Bird Chair. It had a thin layer of rust all over it and it looks like new now. There were also two screws stuck from rust and they got those out at no extra charge. Highly recommended, and they have WAY more reasonable prices than similar businesses closer to Boston.

Had my wheels powder coated and the brake calipers painted. Great quality service from Nick and…read morethe shop, definitely recommend their services here

I'm very pleased with the quality of the repair on my wheel. The workmanship speaks for itself…read more Very quick turn around and great communication. Nick and his team did a great job on my wheel and I highly recommend The Wheel Fix for all your wheel repair / refinishing needs. These folks delivery quality repairs.

I messed up my beautiful rim on a curb. It was painful to look at. Contacted The Wheel Guy on…read moreFriday, got a very quick response. The work was done while I waited. My rim looks brand new. Hope I don't have to use them often, but grateful to know they are there if I do need a fix. Thank you!

Ran over a very large rock in my F-150 and cracked my alloy rim along the inside edge (see photo)…read more Searched the internet for a replacement and got quotes between $400 to $550 for a used one. Called Steve at The Wheel Guy and he fit me right in to the schedule. The crew in Randolph were friendly, professional and fixed my broken wheel in about 90 minutes while I waited. Cost me less than half I would have laid out for a used replacement and its as good as new! If my problem was less involved they could have sent one of four road service vehicles to my house or place of work to fix it, what!? Great service, great people! I will be keeping this info handy in the event I run into another problem in the future. I recommend calling The Wheel Guy for any wheel related issues, rehabs and refinishing needs you may have! Thank you Steve and crew!

Bill and his team restored a couple of metal chairs for my family. He communicated well throughout…read moreand delivered as promised. Truly easy to work with and the quality of work exceeded expectations!

A&B Sandblasting and Powdercoating exceeded our expectations! We brought in a set of metal patio…read morefurniture that is at least 50 years old that had been painted by each generation until it reached us. Bob McFadden's people sandblasted the old coats of paint down to the metal and then applied a powdercoating of paint that made the set look brand new! Not only was it done way ahead of the time promised, but it was a very fair price for the work and we are overjoyed with the results. We are already thinking of what other projects we can bring to them!

BJ was quick to respond and did a great job on my diving board base. It was rusting and had seen…read morebetter days. I am trying to spruce up the pool area, and BJ did a perfect job on the base to make that happen!

Have 4 BBS wheel centers powder coated with Green Mountain Powder Coating. The owner BJ is very…read moreprofational and very easy to work with. The wheels turned out great, and the service is at a very reasonable price. Would give them my business next time around for sure.

I called Spadafora with a simple job that I needed done and they were nice enough on the phone to…read moresay bring it down and they'd take a look. I own a sports-bike so felt like it was a little out of place to bring it to a shop that mostly deals with cruisers and choppers. When I showed up they would barely even acknowledge me and after telling me someone would come out to look at my bike in a few minutes, I sat outside waiting for one of their employees for about 15 minutes. When I went inside again to see what was taking so long they were working on another bike and everyone was standing around completely ignoring me. Needless to say I eft and found another shop that took my bike right away and fixed the problem. Spadafora's has some of the worst customer service I've ever experienced. If I could give them negative stars I would.

I took my 2017 Jap-Crap Dual sport bike in for a Massachusetts state inspection just when the…read moreinspection time was closing. Instead of turning me away like most businesses do when you show up at closing time, (happened to me many times before), they took excellent care of me. Solid shop, great professional customer service!

I just picked up a a set of cast iron clawfoot tub feet that GDL sandblasted, primed and powder…read morecoated, they look awesome. When the feet were dropped off they had so many coats of paint that most of the detail was lost under the layers. Today they look as good as the day they were made, back in the 1930s.

From the owner: In business for over 17 years GDL Paint Inc is a professional and quality painting company. We…read morespecialize in powder coating, painting, sandblasting, and much more. We work as a family and a team to better serve your needs and provide a quality product and service that we are proud of. For more information, call us today.

Final product was as promised. Only difficulty was getting the last bits of sandblasting grit outta…read morethe moving parts. The finish is great.

This review was "filtered out because it is a positive review. I have written plenty of bad reviews…read morebut was impressed with this company which is why I took the time to write it. Yelp apparently doesn't believe that a company can be "Woohoo, as good as it gets". I stick with my review and you can read my others if you think it's B.S. I have lowered the rating to see if it will still be filtered out. My next step will be to write as if I am a moron and see if that works. First and foremost; Trevor is a really good guy. I only had 4 mags coated with Cerakote and he treated me like other guys might treat a high volume customer. He showed me around his shop and seemed really proud of his operation. The mags came out great, the work was excellent and the price was the best that I could find. I got them back in 3 days. (I had a non Cerakote certified gunshop in NH quote me 25% more for the same work and told me it would take a couple of weeks.) SMI is probably one of the best companies that I have ever worked with and as a facilities manager over the years I have dealt with many.