I took my power steering hose from my r34 skyline since none of the parts are just available it was…read morecracked they got me up and going in less than a hour . Great spot great prices definitely will use them once I start building my low low .

Great service , got me going !!! Had to weld up special hose ends but found a way to get my machine…read moreback running Thanks guys!!!

Had my 1965 Ford Mustang 3.3l 200 6 cylinder in here for a refresh…read more Ended up having to get a new crank. They sourced it at a very reasonable price. Bored cylinders 60 over. All new valves in the head, spring etc. I assembled but the work done was absolutely perfection! Work was turned around super quick and priced right. Engine machines shops that are trustworthy are extremely hard to find these days. These guys have won my business for life! 100% recommend.

Worked with Edgar to rebuild my heads on my 1979 GMC Sierra pickup, and I couldn't be happier with…read morethe results. Before bringing them in, the truck was puffing a little blue smoke out the tailpipe. Edgar and his crew rebuilt the heads with all new valves and springs, and the difference is noticeable. The quality of the work was excellent, and the turnaround time was incredible--only 48 hours. It's hard to find people who take this much pride in their craftsmanship these days. Highly recommend Edgar and his team. A++ service!

I reached out to Ryan to build me a tank for my hermit crabs. I'm conducting a scientific study as…read moreto whether they prefer rocks or sand, and needed separated chambers within the tank. Ryan was very accommodating in all my requests and completed the job perfectly in a timely manner!

I bought a squat rack on FB marketplace that was just a few inches too tall to fit in my garage. I…read morecalled Rick's to see if it could be cut shorter and we set up a time for me to bring it in. The owner was really friendly and finished the job in about 5-10 minutes. It was a clean cut with no sharp metal burrs or anything like that. Now that I have my squat rack all set up, I'm very satisfied with the result and would definitely recommend Rick's.

The headers I custom ordered fit perfectly and they arrived in the amount of time promised. Their…read moreprices are very reasonable for the quality of product I received. I would definitely do business with them in the future.

Needed an annual rebuild on our comp drag racing motor…read more A few weeks later, we were told our drag racing motor did not work, nor could it ever work. Curiously, it went 202mph in Vegas. The motor was parked in the same place we left it. Save your money and hassle. Eric NRHA - A/DA.

I took an electrical panel door to CMF for powder-coating. The finished product was "just OK"…read more I dropped the project off on a Monday and was told it would take one week to complete. I called the following Tuesday and left a message for Antwione. I called again on Wednesday and left a message for Antwione. I called again on Thursday and finally got a hold of Antwione. He seemed confused by who I was but after I reminded him, he confirmed that the piece was ready for pick-up. When I picked up the piece Antwione showed me what I needed to do to reattach the door (use a screwdriver to pry the butterfly clips apart) but would not do it for me (I suppose he didn't want the liability if anything broke). He also explained that the spring latch would bounce back once the door was attached. Unfortunately, the spring latch broke the minute we got the butterfly clips back on. The door (which was warped during the process and will no longer lie flat) is now being held shut with velcro strips. He charged me $130 for the project which I later found out should have probably been in the $85 - $100 range. You can see the "hook marks" where the door was held in place during the powder-coating process but since they are on the inside of the door, I'm not going to complain too loudly. I won't bring another piece back here - there is no justification for it based on the quality, price or service received.

I needed a job done for an important client I was recommended to come here and I wasn't sure being…read morethat my customers are important but I'm so glad I took a chance with them. The staff is super friendly everyone was really helpful I walked in and was helped right away as if they knew me. They knew what they were talking about answered all my questions I needed this work done by Friday and I was called Thursday morning letting me know my parts were ready they deliver but no need for my small order!!! Going to use them more often for all my anodize and powder coating, tumbling and laser engraving needs really is a one stop shop thanks again CMF

Terrible terrible service. I brought my lawnmower in for an…read moreengine issue. From the get go I could not communicate with the owner, he was rude and dismissive of me. I tried unsuccessfully to tell him what the problem was and what I had done to the engine already. He brushed me off rudely. I called the shop 3 days later and scheduled the pick up. Again, extremely broken English, charged me $79, no receipt, and would not tell me what he did except yelled "I clean carburetor ". Took the mower home and the engine issue had nor gone away. Still ran really rough and died several times. I took a video for proof. Drove back to his shop showed him the video and asked him what he had for my mower. I used Google translate and he would not communicate with me. Very frustrating. I asked him to fix it again and he would not. I got my money back and tried again to ask him what work he had done to my mower. I left wirh a broken mower, my $79 back, and 3 days waisted waiting for my mower to be repaired.

Good reconditioning at a fair price in a timely fashion. Good mom and pop shop, Thank you.read more

This hone shop is ran by Dana. He's been in the honing business for over 50 years…read more There isn't much he can hone or figure out how to do the job. The shop is very fair as to prices and getting the job done. If your looking for a hone shop this is the one you need to use to get the job done.

This honing company is NOT closed. It is very alive and very well. These are perfectionists who are…read moreskilled beyond what you'd expect. I have to say I've been to the shop, which is hard to find, but once you know where to go, you'll be glad you did. For anything honing ... it's Darc all the way! Got a problem, well, they can either figure it out or send you to the right place.

Been coming here for years.. johny is your man when it comes to performance he young but was…read morethought by oldschool mechanics has done 2 of my blocks and 2 heads and are running strong highly recommend this place ..

I haven't needed any machine work in close to 40 years, so I had to search to find a machine shop…read more My buddy found this place and called for a price, which seemed pretty fair. We tried calling a few others. but none of them answered. THE GOOD: This is an old school machine shop that works on more than cylinder heads. Two brothers own the shop and one of the owners son, Johnny, is awesome, very communicative and a really nice guy! The prices they charge "seem" to be very reasonable (I have nothing to base this on). THE BAD: This is an old school machine shop that works on more than cylinder heads. 1. They are VERY old school, to the point that their system for tracking "what parts belong to who" consists of your name & number scribbled on the back of a business card that is stuck into an opening in whatever part you dropped off, nothing else. 2. Out of the 6 guys that work there, only one, Johnny, speaks English. 3. The phone rarely gets answered. 4. It looks more like a scrap yard than a machine shop: (literally) tons of cylinder heads, engine blocks, crankshafts and camshafts, etc everywhere! THE REALLY BAD (in my case): They called me about 11 am to say my heads were ready to be picked up. As I was busy, I didn't get there until around 4 pm. I walked in, speak to Johnny and let him know I was here to pick up my small block Ford heads. He looks... and looks... talks to another guy there... and looks, then makes a phone call. He then tells me, "a guy was here about 10 minutes ago looking for some small block Ford heads and they gave him your heads and he will be back in about 10 minutes". WTF?!? It was more like 20 mins, but FORTUNATELY this guy pulls up with my heads in the back of his truck. Johnny did apologize a few times about the confusion. I comment on how disorganized they are and he apologizes again. I pay my $240 (no courtesy discount), I thank Johnny and leave. THE VERDICT: Obviously their error was corrected after the guy who had my parts returned them. I'm hoping my experience is a very rare occurrence and no one else has to go through this. Otherwise my cylinder heads were machined as I asked.