June of 2023, my car was vandalized and the catalytic converter was stolen. Since my son was using…read moremy car he felt bad and felt compelled to get it fixed , so not having much money he ordered the converter online really thought he received the right part. Took it to Stockton muffler, there they proceeded to install the converter and knowing the whole time this part was not right for my car and still put it on, and if that wasn't enough to ad more insult to injury they talked him into putting on a rebar to protect the converter that was clearly not the right part charging him all this money, and at the same time my car needed to be smogged so it went over to a smog shop where of course my car would not pass smog because of the converter that was installed that was clearly NOT the right part, which none of us knew we are not mechanics and trusting both these shops , so between the smog shop charging us for two parts that were never ever needed and Stockton muffler installing the converter and thousand of dollars later, my car still was not passing smog and it sounded like a diesel truck. So very frustrated, disappointed, angry, and dissatisfied with both shops giving us the run around sending us back and forth to both shops for over a year!! We had had enough took my car to another shop where they had my car with the right parts put on and up and running in 45 minutes and course it passed smog and sounded great!!!! I think Stockton muffler should pay us the money back that was spent and time wasted for parts that were not needed and putting on a converter that was clearly not right for my car!! Shameful they took advantage of me and my husband and son and ripped us off of all our hard earned money we spent for them to install these incorrect parts. I would NOT recommend this shop!! Clearly they need to be reported to the BBB!!!! Very disappointed!!!! V Schultz

Drove 30 minutes because they said in the phone they can work on my car. When I got there they…read moreapparently couldn't. Nor cal muffler is better than these guys , just go to them .

After meeting with the owner Mike over concerns of an overheating transmission, Mike recommended a…read moretransmission cooler. Although his schedule was busy, he saw me the next morning. Since the truck is 19 years old and we don't know the entire maintenance history, I asked if he had time to change the oil in the transmission. While that was being done I went over to the tech and he showed us the old oil. It was pretty bad. On the way home the tranny temp was 34 degrees cooler than on my way there. Overall, great service, very accommodating and good prices!

Three months ago, my son and I filed a lawsuit against Highspeed Transmission's owner (Mike) and a…read morecomplaint to the Bureau of Automotive repair which is currently under investigation. Originally, Mike test drove my son's 2014 Jeep Grand Cherokee claiming it's Power Transfer Unit (PTU) was defunct and needed replacement. When in fact it was a defunct wheel bearing that caused the Jeep to lock up. Last Monday Mike testified in court, under oath, that he purchased a used PTU after he had previously told me that my son brought in a used PTU. During questioning he told the Judge that he couldn't find the used PTU's invoice. He then told the judge he wasn't sure where he purchased it. After he thought about it, he stated that 'possibly' he purchased it from Rancho Cordova. When questioned by the judge--- Mike said he placed the original PTU in the Jeeps trunk. My son and I practically fell off our chairs in shock of his bold lie. By the way--- Mike retained the Jeep for 3 months for reasons unknown and charged my son $2,604.37 (cash only) and the invoice shows a breakdown of $1,793.00 in parts and $650.00 in labor! Mike has threatened to sue my son for defamation from a POST months ago! Mike--- we double dare you to sue us for defamation. Surely you know you've made a grave mistake in what you've done to us. Like I told the judge--- this is not a warranty issue; this is a fraud case! I promise win, lose or draw I will post the court's findings when it comes. Also--- The Bureau of Automotive Repair's findings! San Joaquin court case #STK-CV-SC-2024-0010928. The Bureau of Automotive Repair Reference #5EBF-VHVDF7. People that commit fraud should do jailtime not a Rating!!!

Drove all the way out to pick up parts that were advertised. Confirmed morning of that I could come…read morepick them up. Took off work to get this done and drove out to Stockton. Was told when I arrived that they weren't sure if they had them. Showed me what they had which wasn't correct. Basically wasted 2 hours of time and gas for nothing. Thanks

Sold me the wrong rims even thoe i asked him many times to make sure its the right one …read more Now cant even get a refund . What a scam . Stay away Asks for cash only most of the times*

Stay away from this company specially from Jonathan eme the sales manager. He is rude and not…read morehelpful at all with customers. They claim to ship out orders next day but they dont tell you that half of what they sell its not in stock and only after you pay they tell you they dont got certain stuff and will take weeks or months to ship out. The manager gets butthurt when he gets called out and cancels orders that at no point did I tell him to cancel my order. Stay away from this garbage company.

2016 Audi A4 with IE STAGE I tune. Previous Audi 2003 A4 1.8T B5.5, Stage I unitronic ate the…read moreclutch so I installed a single mass and LOVED IT. Drove it for another 80,000 miles (190,000 total) and sold it. Picked up the 2016 2.0T B8.5 6sp and figured I'd do the same thing. Stage I tune ate the clutch so wanted a single mass like before. This clutch/flywheel is a Radically different design but this ones far easier to install. Getting the splines to line up installing the clutch like a torque converter is a breeze compared to the traditional clutch setups. JHMs piece is super nice. Per the recommendation to change the clutch line to a one piece stainless usp piece, I did (THAT JOB WAS A PITA). Cleaned face of flywheel and pressure plate, torqued pressure plate per their instructions that are here. Installed and off I went enjoying the positive engagement, ease of shifting and seriously easy pedal. Kinda felt too easy to push. I go about the break in process, happy with how its feeling, staying in touch via email as to how they recommend to bed it in. 500 miles comes along I get the okay to give it some beans. It skips at anything past half throttle. Go back to driving Ms Daisy and IMMEDIATELY EMAIL and express my worry. Emails going back and forth trying to figure out whats going on. Meanwhile still driving back and forth to work like I have Ms Daisy in the back seat. Every once in a while I give it a shot and Nope, skips everytime. Then the Emails get ugly, "Installed" "Installed" wrong. I find I'm having to now defend MY competency in installing a clutch. 57yrs old been wrenching since I was 16, have a 70 Nova with a 498 I BUILT and ported the heads (and tested with my flow bench) I BUILT the TH 400 trans, mini tubbed it assembled the narrowed 9" and I'm a Auto Tech for a living. ect ect ECT. However now I'm getting stressed out thinking I got had by JHM But back to,, umm, "I" KNOW how to swap out a clutch for mucks sake. And now I'm just wanting my car back to stock, Im done trying to soop up my daily, and then the emails turn to "store credit" instead of a refund!! Unless I send it back ASAP. The clutch was out THAT night and spent $180 to get it sent back the following day. ASAP?? DONE!! I get a few emails saying my return has been accepted and my "Refund" will be processed in the order it was received. 2 weeks go by and nothing. Send off Email and get a reply back indicating that NOW the owner wants to renig on my refund because it was installed???!!! oh yeah almost forgot. When I pulled it out the weak pedal (the B 5.5s pedal was nice and stiff) got me really curious. So I set up a jig in my press and measured the old factory Luk SAC pressure plate fingers and it was at 640/650 PSI And JHMs pressure plates fingers were also at 640/650 PSI. So someone explain to me EXACTLY how JHMs pressure plate is going to have anymore clamping force than a factory SACs with the Exact same pressure .. Oh jeeze I almost forgot this too. The morning of the night I pulled the clutch. I pulled the IE Stage I tune back out of the car thinking I'd keep trying to bed the clutch in without worrying about it skipping. I had round about 600 miles on it by this point so I figured I'd at least be able to drive it like normal on the factory tune, RIGHT?? I WAS WRONG!! Let me back up a little. After I pulled the tune out and discovered it wouldn't hold THAT is when I Emailed that little tid bit and that's when the "store credit" vs "refund" per fine print was brought up. Unless I pulled it and sent it back NOW. NOW IM STRESSED AS ALL GET OUT THINKING I JUST GOT HAD FOR $2700 UNLESS I BUST MY ARSE AND GET THE CLUTCH OUT AND SENT!!!!!! To which As I said I did get it out and sent, within 16 hours. To Recap; JHMs single mass organic fiber good for 400ftlbs and 90% of any performance mods including a KO4 turbo. Didn't EVEN HOLD THE FACTORY TUNE IN MY 2016 Audi A4 2.0T 6 speed Quattro. And now, I'm being denied (by the owner) the $2700 refund let alone the $180 shipping. I had the clutch in the car 3 days short of a month. It takes a easy week to ship from cali to mi and vise versa. And now I'm having to BEG to 'somehow' recoup MY $2700.00 I spent on a clutch that didn't work as described, for me Like "I'm" the guilty party. Of WHAT?? Trusting JHMs claim that this clutch will do what it DIDN'T??? I just want my car back after being down for going on a month now but the "owners" now on Vacation. Must be nice,. hope my $2700.00 has enabled You to really enjoy life. While Im stuck having to spend $100 a week on fuel in a truck vs the 60 every two weeks the Audi got because I'm being strung along on a refund. I cant get something else to put in the car to get it back on the road because this guy decided to change his mind about giving me my money back after I busted my arse to pull,.send it, and got Emails saying the return is accepted and the refund is in process. So, take all that for wherever it

i had searched high and low, from Sacramento to Stockton for a 2012 Chevy Silverado 1500 LT 2WD…read more Left rear exterior door handle (white). As i was about to give up my search gave Stockton Auto Dismantlers on El Dorado a try. No luck, but (Frank) sent me to Kennedy Auto Dismantlers. low and behold the had a (new) L/R door handle (white) for my 2012 Chevy Silverado. I usually do not write reviews but this was well worth it. Thank you Frank and Kennedys Auto Dismantlers for making my day. Doug Wiseman

The guy on the phone is rude, insulting and unprofessional. He said this part "Im selling at a…read moresteal, anywhere else it would be $500". I responded by saying "No its not. On Amazon its $150 free shipping". He said "Why dont you go buy it there then?" I responded "I need them by Saturday". I asked if I could drive in and pick it up and he said "Yeah but your going to need life insurance when you come here". Really, that guy has a lot of nerve. I think he is going to have a hard life. Who talks to people like that?

Sons turbo went out on his car and they quoted me cheaper then anyone else and fixed it pretty…read morequickly . Will start bringing all my cars here if I have an issue

My family has been taking their cars into this mechanic shop and they do amazing repairs. The price…read morefor labor is very good. Owner is very nice and knows his stuff about vehicles. I will continue to have my friends and family bring their vehicles only to this shop from now on.

They put the duals on my truck. Did what I asked, and at a…read morefair price. Can't ask for more

Went in with a Flow Master that was super loud that I despised! Told the guys what I was looking…read morefor and they hooked me up with the perfect muffler...beefy but not too loud! Not embarrassed anymore.

I had a great experience at I Pull U Pull--the yard is well organized and the prices are very…read moreaffordable. Juanita, Martha, and Dean were all amazing, super friendly, and made the whole process easy and smooth. If you're willing to put in a little work and bring your own tools, this is definitely the place to go for quality used auto parts. Got a free shirt and admission

I was here 9am and Waited 30 mins the store still not opening. 8-9 cars are waiting outside. Never…read moreseen to a business like this before. Wasted lot of people