Big Art gets it done , no need to look anywhere else for what you're looking for this is it right…read morehere!!!! Amazing value, great service, super efficient

Art has been servicing our family toys for a while now and I have never been disappointed, he…read morealways shows us what needed repair or servicing and gets the job done. He just serviced our pontoon and the best part is I didn't have to stop what I was doing or take time off to get service he came out to our ranch and got the work done!

Highly recommend Mr. Le! He recently completed a 100-hour service on our twin Yamaha 150s at a very…read morecompetitive price. He's been an incredible resource for us. He's helped us troubleshoot several times while we were actually out on the water, showing just how much he cares about his clients. He also gave us a great referral to Robert's Marine for our electronics and fiberglass projects. If you're looking for a mechanic who is responsive and truly knows his way around an engine, Mr. Le is the best. Highly recommended!

Great quality work and fast turn around. Made repairs the same day on my trailer that needed torn…read morebrake lines replaced. Provided and helpful recommendations for rerouting lines to prevent future damage.

The highest compliments that I (and my Wellcraft 200SS Platinum) can pay to this business and its…read moreowner, Glen, are as follows: Honesty as the day is long Reasonable prices Good, positive disposition and a pleasure (no pun intended) to work with Treats customers with respect, follows up and knows his craft There is a dwindling number of solid businesses that support the boating hobby. Pleasure Boat Specialties is deserving of my highest recommendation.

I had my boat stereo done by Liquid Trends next door and quickly found out that Pleasure Boat's is…read morethe absolute best for maintenance. I've had an older Malibu Skier and my new Malibu VTX worked on, and both pricing and workmanship have been stellar. Glen will make you aware of what needs to be replaced and not force you to replace something that is not needing replacement or that can wait. With the amount of shops going under and the poor workmanship these days, Glen is on top of everything. No delays and great attention to detail. The pricing is good and at fair market value. What seperates this shop from the others is the service and honesty. I would recommend Glen and the crew in a heart beat.

Affordable and reliable service, got my propeller and battery replaced, will recommend.read more

From the owner: If you're looking for professional maritime services in San Francisco South Bay, California, go no…read morefurther than South Bay Pro Boat Repair Shop. Our highly trained technicians have a genuine love for the ocean and the boats on it, and we bring decades of experience to each boating project. Our goal is to improve your time spent on the water with our painstaking repairs, rigorous maintenance, and cutting-edge upgrades. We know firsthand how important it is to have a boat that runs well because we are serious boating aficionados. We'll make sure your boat is in tip-top shape so you can concentrate on having fun and making memories out on the water.

I took my boat here to be serviced before the boating season 2016 and 2017. At first Jim seemed to…read morebe an honest person. I asked him to save my impeller so I could see the wear and tear. Needless to say when I went to pick up my boat I asked for the part and he "threw it away". You'd think he'd get it out right? No! I just took my boat in to get ready for the 2018 boating season and guess what he told me?!! My impeller has NEVER been changed. Oh well. You live and learn. Don't trust this guy. He will take your money and you will get nothing in return. Actually you will get something... A hefty bill to fix Jim's mistakes!

Beware!!! I purchased a used Vortech 4.3 engine from Jim…read more I was told it had 50 hours on it, And was assured that the motor was practically new and in perfect running condition. (Cutting to the chase, the motor was absolutely no good, was put in my boat, And within 20 minutes blew up throwing a connecting rod and other engine parts out the side of my block creating a hole the size of a softball)!!! Individuals with a mechanical aptitude or interest in hearing the rest of the story please Read on. I brought the motor to my mechanic. (Who has been used and found to be honest and trustworthy for over 20 years By some of my closest friends). I got a call from my mechanic The next day expressing his concerns, He told me that everything down to the freeze plugs and rear main seal had been pulled out of the motor and he thought it was possibly a core motor, (no good, to be sent in for a rebuild) He proceeded to do a compression check and found very low compression on one cylinder, I then called Jim, he was very convincing and assured me that the motor was good but he had his floor cleaned and it may have gotten a little water in the top of the motor,and that it was nothing to worry about , that a valve might be stuck open, and that my mechanic should know enough to take the valve cover off and tap on the valves with a hammer! I remained respectful and calm and told Jim that I didn't feel comfortable having my mechanic hit the hit the valves with a hammer. Jim however was again very convincing and said it was common practice and that if my mechanic knew what he was doing he should've already tried pulling off the valve covers and tapping on the valves with a hammer, when I suggested that we shouldn't have to do that because I was assured that the motor only 50 hours on it and it was good ,Jim became irritated and started to belittle my mechanic for not knowing what he was doing! I didn't feel like I had many options (I had already paid him cash for the motor) so I asked Jim if I instructed my mechanic to dig further to try and resolve the problem And it couldn't be resolved easily if he would refund my money, he assured me , absolutely! My mechanic then did a leak down test, And found that none of the valves were stuck open, they were all opening and closing properly. I put in another call to Jim, and also asked my mechanic to call Jim to see if he could come to a resolution. At this point Jim started to accuse my mechanic of not knowing what he was doing,( once again) He went on to say that it was probably just a ring on the piston sticking, and that putting some magic Marvel oil down in the cylinder would resolve the problem and my mechanic should know that. I asked Jim if I could bring the motor back and get a refund, at this point he became borderline belligerent, even accusing my mechanic of switching out the engine block! Hoping against all odds and because I didn't have anymore money to invest having paid a lot of money for a motor from Jim, I asked my mechanic if it was possible that water, as Jim had said could've caused the problem, he said yes a ring could possibly be sticking and it might work itself out by running the motor for a while, but he advised me against it and told me unfortunately I may have to cut my losses and find a good motor. Out of money and options I crossed my fingers and told him to put the motor in Because Jim obviously was not going to make good, and I didn't have any money for another motor. My mechanic put the motor in, I went and picked up the boat and put it in the water. Within 20 minutes of running it out on the Delta, taking it easy as my mechanic had instructed, keeping the RPMs down etc. I heard a loud bang! Lifting up the rear deck lid I saw lots of oil in the bottom of the boat and lots of metal, closer inspection revealed a softball sized hole in the side of the engine! Steer clear of the shop! Please, please, please do your research ,read yelp reviews Whatever you have to do so you don't end up in my situation.

This guy is amazing rebuilt my velvet drive and had me back on the lake in a weeks time and it…read moreworked flawlessly thanks again!!

I have had numerous boats. Three ski/wake/wave boats, 36 to 40 cruisers, and three jet skis. I have…read morebeen taking my boats to Chris for 30 plus years. He used to run the service dept. for the local Master Craft Four Winns Sea Ray shop in Santa Clara. Chris just knows boats. With that being said, Chris in a no B.S. kinda guy. You will probably not get along with him if you go in there with an attitude ( I need my boat yesterday). Chris just knows boats and he has a million contacts in the area for all your boating needs....canvas, gel-coat ect. Who ever it was that gave him one-star, probably the first boat they ever owned.... Go in there and develop a relationship and he will take care of you for life. Chris is one of those great guys you will be lucky enough to meet.

I can't say enough good things about Sean! He's an incredibly skilled mechanic with a wealth of…read moreknowledge about boat mechanics. He's super detailed in his work, always providing pictures and notes to keep you updated every step of the way. Recently, he rebuilt my carburetor and changed all the fuel filters, laying everything out so I could see the process. Thanks to him, my boat has never run better! If you're looking for someone trustworthy and highly skilled, Sean is your guy!"I forgot to mention he's also one of the nicest people you'll ever meet.

From the owner: Mechanical, electrical, electronics etc…read more Annual services, 50, 100, 200, 300, 1000hr services. Winterizing! Summerizing! Diagnostics and troubleshooting. Gas and Diesel generator services. Audio/visual systems. Navigational equipment and electronics. 10+ Years Experience! Immediate availability—100% mobile boat repair, we come to you! Labor rate: $180/hr