4Peaks Tactical delivered flawless work on my competition CZ TS2…read more They installed a 2 lbs trigger with precision. The break is crisp, predictable, and consistently light. Reset is short and instant. Cerakote bronze finish is even, matte, and professionally masked. No overspray, no runs, no uneven edges. Fit and function were tested before return. The gun cycles cleanly and groups tightened immediately.

Great place, with great knowledge, and great customer service. Kent and Ted do not hesitate to…read morehelp in any way they can, and have always provided a great buying experience. The shop dog Thor is also happy to talk Milkbones!

Every time I do business with the guys at this store I'm treated respectfully and attentively! Gary…read moreand Adam are always courteous and helpful, whether I'm buying, selling or having work done on any of my Glock pistols! They typically have a nice selection of a variety of pistols, both new and used, that are fairly priced. Stop in and check them out.

OPTIC CUT/SLIDE MILLING BEWARE!!!…read more I took my gen 5 Glock 26 slide to Glockmeister for their optic cut service. I brought my optic in to ensure that the correct cut would be made and it would fit before dropping it off for service. I received a call exactly a week after I dropped off my slide letting me know that it was ready for pickup. I also had a compensator installed at the time of pickup as well as the optic being attached without being shown the actual work done. I was so focused on the compensator and over all look of the build as a whole, that I did not notice the big gap between the slide and the optic until I had gotten home and noticed you could see the screw as well as the blue loctite in a picture I had taken. I immediately drove back to the store and informed the employee of the issue, to which he instantly got upset and started raising his voice. He began trying to gaslight me into thinking there was nothing wrong with the cut at all and that "sometimes that happens with custom work". When I brought up the fact that the gap is bigger on one side and the optic is crooked, he claimed it was not crooked and there was nothing wrong with it as he installed it himself and didn't see anything, refusing to acknowledge or address the issue. I walked out at that point and decided to get a second opinion from Southwest Precision Arms the next day after being referred to them by a friend. They removed the optic for me and were able to show and explain just how bad the work done by Glockmeister actually was. According to them, it was the worst cut they had seen in the past 10 years of the business and that my slide was ruined. The cut was made way too deep, causing the screw hole nearest the extractor to only have maybe a thread and a half at most before actually hitting the extractor. There was also a strip of even more material removed than the already too deep cut itself in the very back, causing the optic to never be able to make full contact/sit flush even if it did fit correctly. Upon receiving this information I drove straight back to Glockmeister to see if I could get in touch with the owner about the situation. I was met with the same employee who claimed that there was no way to get in touch with the owner as he is camping deep in the woods. I began explaining the ruined slide situation again as calm and collected as possible and was met with more aggressive behavior and complete denial or acknowledgement of anything being wrong with my slide or the cut at all. After some back and forth I was offered "like $75", then finally offered a refund if I was not happy with the work. Still no acknowledgement of any wrong doing at all. I denied the refund as this is beyond just not being happy with the work. I am now writing this review in the hopes that I can somehow get in contact with the owner to make the situation right as well as to warn others if they are thinking of getting their slide milled for an optic at Glockmeister.

Thunderbird Cartridge co has a Great and knowledgeable staff and everything you need to manufacture…read morethe Highest quality Ammunition or let them make it for you!!

I chose Chandler due to location (I'm in Vegas) and price. These guys are outstanding. They…read morecommunicate clearly from the beginning to end and their quality of gunsmithing is simply the best. I had my Kimber 2k11 ported and the job they did with custom rectangular holes to fit the slide vents precisely beats all other internet options. I wouldn't trust my firearms to anyone else.

I came in with my Ruger MK3 with an assembly problem, Adam and the gunsmith took care of the issue…read moreright away. Great folks

WOW These guys are awesome, really!!! From quality to professional service and affordable price…read morethey are the best in everything. Hunter has been my guy since I purchased my AR and takes care of me every time I go there. Also they make their own parts in the store with high end machines and top quality parts. Thank you Quenton Defense team, I appreciate all your help.

Bought a brand-new suppressor that was faulty right out of the box. Was told it was a bad one. The…read moreprocess was frustrating, I just bought brand new and when I tried picking it up on second said date, the older gentleman working there was extremely rude. All I wanted was some reassurance that the issue was actually being taken care of at a timely manner. Definitely didn't feel valued as a customer. Going on two weeks. When the item was suppose to be new out of the box

There are a few things that I appreciated from this shop, 1) service was great 2) very clean and…read morenice size shop 3) they file the ATF form 4473 electronically!! Lastly, they have an unbeatable transfer fee!

OMG I found this store today and it is AWESOME! Just off Ocotillo in an industrial park. Just like…read moretheir name says - NOW - they carry modern firearms and related accoutrements....AR lowers , ammo, knives, THEN - they have some antique to vintage firearms and militaria as well. These folks are super easy to work with. I asked about an out of state firearm transfer and they sent my contact their FFL while I was in the store. This store is big on customer service!

!!!!!!!!!!!!!UPDATE!!!!!!!!!!!!!!! I received a phone call…read morefrom the owner of Arizona Firearms yesterday evening 06/14/2021. He informed me that he had seen my post, recalled hearing about it in the store, and then nothing, so he thought it had been resolved by one of his managers. He read my post over the weekend and realized it had not been resolved to their standard of business operations. We had a great discussion and Arizona Firearms stepped up and completely resolved the issue and concern. It is unfortunate that it had to be resolved in the manner that it did, BUT all is safely mended. A SHOUT OUT to Arizona Firearms for completely resolving this matter! This is the kind of support that we as consumers expect from people we do business with. I expect to be returning to Arizona Firearms in the future to do more business with them. The store is stocked and they have ammunition for GREAT prices (I was just in there an hour ago). Thank you Arizona Firearms!!! --------------------------------------------------------------------------------------------------- Some information for you gun owners out there.... I purchased a used Tri-Star Raptor 20ga from Arizona Firearms in late 2019 for my two pre-teen boys. Due to COVID and fire/shooting bans in Arizona, I was unable to fire this shotgun until late 2020. When I did fire the shotgun, it immediately jammed. It jammed so bad that I needed to take it into my gunsmith. My gunsmith mentioned that the internal parts were damaged and needed to be sent to Tri-Star for repairs. I shipped the gun to Tri-Star for repairs. The first phone call I received from Tri-Star was from one of its Officers of the company. I was shocked! He informed me that he personally looked at the shotgun that I sent for repairs. The shotgun was manufactured in 2013 and still contained all of the original internal parts, and they had never been replaced. He estimated that it is possible that the gun had seen several thousand rounds through it. He immediately condemned the gun and mentioned that it should never have been resold into circulation as it could possibly injure the shooter. He then asked if he could reach out to Arizona Firearms on my behalf to discuss the condition of the gun and the sale. I received a phone call back from Tri-Star. I was informed that Arizona Firearms does not bench check or test fire used firearms they purchase. They are immediately placed on the rack for sale. The manager of Arizona Firearms also asked Tri-Star to ship the gun back to them so they could look at it! Tri-Star refused by stating they could not allow this gun back into circulation and that the phone call from the officer of the manufacturer should ease their suspicions. Tri-Star asked that I reach back out to the manager of Arizona Firearms to see if they could reimburse me in some way by either a store credit or FFL transfer of a new gun. After several messages left over 2 months, I never received any contact back. In lieu of this, I contacted Tri-Star. Tri-Star immediately rectified the issue by replacing the gun with a new model at a very fair price. I cannot express how impressed and appreciative I am of Tri-Star Arms and the company officer that assisted me with this. They went completely out of their way to help a customer feel satisfied and safe with their product. I highly recommend Tri-Star Arms, their guns and their customer support. Life-long customer ahead. Thank you! Scott Drews Scottsdale, AZ

bad customer service , guys talks with no type of respect or show any smile all bothered and…read moreserious .one was rolling his eyes and not showing any care in selling guns, very judgmental as well and carry some type of ego. came because I heard there a good store Mind changed instantly

Did a FFL transfer, it arrived same day I picked it up. They made everything so great and easy for…read moreme. I'm also new to Arizona so they gave me a bunch of free hats and gear and we're just excellent. I've been to other gun shops and this place has been an awesome experience for me.

This store is in a strip mall, and doesn't stand out, so you kind of have to look for it. I came…read morehere for one type of pistol and wound up leaving with a different type. They have a pretty good choice of new and used guns, but it's hard to pass up a weapon that they aren't making anymore, so that's what I purchased. When I picked it up, (Chandler PD puts a hold on weapons that are traded in to insure that they aren't stolen) the cylinder was a bit sticky (probably from sitting for a while) so the guy working there (didn't get his name, sorry) lubed cylinder, and tested it to make sure it was operational. For my troubles he threw in a box of ammo! That kind of service, and value is worth my business, so I'll be back for my next purchase.