I had a small job that the other machine shops wouldn't take. Mike was very helpful! I can't…read morerecommend him highly enough.

These guys know their stuff. We had a consult with them and got honest and competent feedback. I'd…read morego back anytime for work. Highly recommend.

Outstanding work done to my RV wheelchair lift. Definitely use again. Mobile service and reasonable…read moreprice. Anthony was able to fix and adjust lift. Good as new now.Highly recommend.

Quick to get in touch with me regarding my small arc welding project and once on site was quick to…read moreknock it out. Friendly, knew what he was doing (like grinding to bare metal before welding) and had a trick to setup the job correctly. I'm often in need of services other than the one he provides and told me to reach out any time for help finding quality people (like for roofing, asphalt, etc). Highly recommend!

They did a good job on my flywheel. Nice guys at the shop and great service. Inflation sucks.read more

I was sending work to Gary since he was able to sneak in cylinder heads and some block work, do to…read morehis Machinist retiring and only working 1 day a week. However in the last several months the quality or work had dropped off or he has started severely overcharging. I had him clean a couple oil pans and a few parts and even though I told him to only run them through the sprayer booth he without consent media blasted and other thing to the tune of 500$. Once I returned to the shop I found a bit of runt on a Rod journal and called him to give him a heads up. next visit I took him a cylinder head and what I received in return was half of a camshaft out of a running OEM engine (with out any rust) came back badly rusted. When ever I spoke with him all I heard about the job was "AH!". Gary seems to have no idea what is going on. It's very sad to see this shop going out of business. When you attempt to drop off items the entire driveway has been sold to the tire shop. When asked about the significant rust they left on my clients camshafts, Gary simply said you'll need to remove the rust. He stated the he "Never looked at the job." It unfortunate that his brain can't wrap itself around the fact that it's time to sell before there is nothing left. they are doing greater damage then any benefit possible. I'm sorry to see you go Gary!!! These cams may have been coated with oil but there was NO!! "rust" prior to visiting Pacific Auto Machine!!!

I had a really good experience getting indoor and outdoor railings with AC Custom Metal Work…read more From start to finish the team was very quick and responsive. They answered all my questions, and came back with a reasonable quote and very quick lead time for production. Railings were installed with care and great attention to detail. The end product was high quality and exactly what I was hoping for! Highly recommended and a pleasure doing business with.

My wife and I could not be happier with the construction quality and design of a custom metal…read morerailing we just had installed on a stepped sidewalk approaching our home's entrance. My expectations were exceeded, as this railing a definitely a notch above any of the typical iron railings seen on most properties. Moreover, Brandon was very receptive my design preferences and easy to work with. I highly recommend AC Custom Metal Work.

Jim is a true old-school repairman. He'll tell you straight and give you an honest, very…read morereasonable quote for the work he'll do for your repair. I brought in my Mantis Tiller when it wouldn't start after sitting in the shed for the winter. Jim anticipated that I'd need a new carburetor and that it would cost about $50 for the repair. That would have been a bargain, compared to another quote I'd received. Instead, it only needed a tune-up and he charged me a ridiculously low price for that. Let's just say that I would have paid three times more for just dropping it off at the other repair facility which did not include the cost of the work. This is the place to go! As I said, Jim is old-school, i.e. no online booking, no text messages. Make a phone call and schedule the appointment. Totally worth it! And he's a very kind soul, too.

Jim got my lawnmower working like new and he was able to help me even though I didn't have much…read moretime before I needed to have it back from him. He works on lawnmowers, gas trimmers and other similar equipment. He cleaned out a very clogged carburetor and tuned up and sharpened the blade on my mower for $60. I would go back to him in a heartbeat.

Steve was great and up front about timing and price…read more He quickly fixed my mower (which was not running due to bad gas that had been put in it) and got me back up and running. I didn't even miss a mowing cycle on my lawn. I'd recommend Witty's and Steve to anyone who needs service on a lawn mower.

Really glad to find someone who can service my small Honda eu1000 camping generator…read more Friendly prompt affordable service. Recommended.

Our MCM Eames style lounge chair broke. Al exceeded our expectations, doing a fantastic job fixing…read morethe base. Job was completed in 2 days. Very reasonable! Now I'm looking around the house... What else do I need fixed?

I brought in a project in the after noon expecting it to be completed in 3 days, due to their…read morebacklog. A few hours later, he called me back and let me know that they were already done and it's ready for me to pick up! I came and and found the end the workmanship on the end result exceeded my expectations. Al and his guys are excellent craftsmen and take pride in their work - knowledgeable, skillful, and quick!

I recently purchased a cute vintage canned ham trailer... with an equally vintage trailer coupler…read more Somehow the trailer made it home from Tenino without coming off the hitch despite all the bumps, so I figured I shouldn't tempt the fates by taking it out on that coupler again. Pricing was very reasonable and the work was done super fast. It took one evening to cut off the old coupler, at which point it was discovered that the support piece of the tongue didn't extend out far enough to safely support the coupler. A couple nights later, he came back out with metal to extend the tongue and got the whole thing put on, all at the original price he quoted. Extremely happy with the work and really looking forward to getting this trailer out on the road! This is quality welding and I feel confident taking it out even on the rough forest roads.

This company came to my door, fixed my project to my specs, and the prices were great. I even got a…read moresmall discount for being able to be put in route to a large job. Dwayne was very professional, he called me up to confirm, he then showed up 5 minutes early to get setup and didn't stop until the job was done. Fantastic workmanship as well as professionalism. I would recommend Rosario Sound Welding to anyone with a welding or fabrication need.